What happens if Huangming Solar presses the electric heat? How about turning it off?? 20

Hello, such as the screen intelligent control system:

Key name and function setting:

"Setting" button: Set the center water temperature of the hot water, the temperature of the solar water heater to control the water replenishment temperature, Beijing time, and press and hold this button for more than five seconds to set the capacity of the solar water heater water tank.

Query + "key: is a functional composite key, the switch key between fault query and non-query, query the fault information of solar water heater and hot water center; When setting the value, increase the value of the setting state.

Electric heating -": is a functional composite key, the switch key between thermostatic electric heating and non-electric heating, click it to enter the thermostatic point heating state, and press and hold for five seconds to exit the electric heating state; When you set a value, you can also reduce the value of the setting state.

"Power" button: The switch key for the display.

Volume + Enter": Press this key to increase the volume.

Volume-": Press this key to decrease the volume.

"On/off" button: press this button to switch between standby and shutdown of the TV screen, Note: When the power is on, the indicator light of the TV is blue, and the indicator light is red when the power is turned off.

Remote Control Usage: When using the remote control, point the remote control at the remote control receiving window on the TV.

Note: Do not tap the remote control too hard, do not let the strong light shine directly on the remote control, the heat energy will deform it.

In direct sunlight, the remote control is not working properly, if so, adjust the angle of the TV or bring the remote control as close to the sensor window on the TV as possible.

You can log in to the official website**.

Contact customer service, ask for the manual of your meter, and operate according to the manual.

If you have any questions, please feel free to ask questions to the Huangming Enterprise Platform, and I will answer them for you in a timely manner.

Press it again to turn it off, and if you don't press it, the water will automatically stop when it reaches the set temperature.

The method of turning on the electric heating of Huangming Solar is: press the electric heating button on the temperature control to get the electric heating function. When not in use, tap the electric heating function again to turn it off.

When the temperature of solar energy is not enough, there will be auxiliary heating to meet the needs of water temperature, that is, the common electric auxiliary heating, in fact, the principle of electric auxiliary heating is exactly the same as that of electric water heaters, which are all used to heat cold water, which can be treated as an electric water heater when using electrical safety requirements;

If there is no fault in the electric auxiliary heating of the solar water heater, that is, there is no leakage, there will be no problem even if the bath is heated by electricity, which is exactly the same as when the water heater is used normally;

Huangming solar water heater how to automatic electric heating can be controlled by setting the temperature to control the automatic electric heating.

For example, set the heating temperature to 40 degrees Celsius and the stopping temperature to 55 degrees Celsius. When the temperature is lower than 40 degrees, the electric heating will be automatically started, and when it reaches 55 degrees, the power will be automatically cut off.

Here's how to set the temperature of a solar water heater:

1. A fully automatic photoelectric dual-purpose integrated solar water heater is required.

2. Manual control, adjust to a suitable stability.

3. The timing mode can be set to water supply twice at a timed time.

4. In temperature control mode, users can choose manual heating according to their needs.

5. The intelligent mode can ensure the normal use of the user.

6. Through these steps, the normal temperature can be regulated.

The control system of electric heating is different, and the use method is not the same, please consult the 85846783 of Huangming Qingdao Service Center

Generally speaking, it is smart, it doesn't burn to 100 degrees Celsius, it's usually 60 degrees Celsius, but you can adjust it to 50 degrees Celsius, and generally speaking, 50 degrees Celsius is just the right temperature for people to take a bath.

How to turn on the electric heating: 1. If your thermostat cannot be directly controlled, that is to say, your electric heating is plugged in with another leakage protection. Plug the leak protection directly into the socket, and then, press the larger button on the leak protection, and the red light will be turned on to indicate that it is heating; In this way, the electric heating will no longer be electric heating within 70 degrees, but the temperature will drop by about 5 degrees Celsius and the electric heating will be started again.

Therefore, please turn off the leak protection after the electric heat reaches the desired temperature.

2. If the temperature control is controllable, press the electric heating button on the temperature control to heat the heat, if it can't be heated, please check whether the water level has reached 50%, and whether the set temperature is too low to cause no electric heating. This type of thermostat will automatically turn off when the temperature is set when the specified temperature is set.

3. It is strictly forbidden to use hot water in the electric heating process!

The method of removing Huangming solar electric heating is: in all-weather mode, the manual "water button" can go up to the set upper line water volume, and click the "point heat button" electric heating to cancel.

Solar water heaters usually work in a natural cycle and have no external power. Vacuum tube solar water heaters are in-line structures, and the hot water is powered by gravity. Flat panel solar water heaters are powered by the pressure of tap water, known as top water.

The solar central heating system uses pump circulation.

Due to the small collection area of solar water heaters, pipe circulation is generally not used considering the loss of heat energy. The solar water heater works in the top water mode, and the vacuum tube solar water heater can also work in the top water mode, and the jacket or coil mode can be used in the water tank. The advantage of top water work is that the water supply pressure is tap water pressure, which is higher than the natural gravity pressure.

Hello, press the reservation button to flash the timing water time first, press three times in a row to set the timing electric heating in the flash, and then press the water (—) button to adjust the time to ——: it's OK. Then press the reservation button and adjust the timed electric heating 2 to - the electric heating twice is canceled.

You can ask their ** business, or you can call their company.

The controllers are somewhat similar. The heating time is set to 24:00, and the time is not recognized; In addition, to cancel the "all-weather" function, press and hold "heat" for two seconds.

This has nothing to do with what brand of solar energy, mainly the control instrument. You can set up automatic or manual electric heating yourself. For example, if you set the electric heating temperature to 40°, the electric heating function will be automatically used below 40°.

Please refer to the instructions for details, as the brand and model of the meter may vary.

When the hot water for bathing is 37 39, it has a miraculous effect on eliminating physical fatigue. 40 45 is more conducive to relaxing muscles and invigorating blood.

The temperature that is suitable for our bath is determined, but there is some traditional heat due to the large differences in the water heaters currently used in thousands of homes.

Water dispensers do not have an accurate temperature setting function. Like the traditional instantaneous gas water heater, it generally uses two spins of fire and temperature.

button to adjust the temperature, at this time, it is not possible to set the temperature of the water well.

If the timer is turned off, it is temperature controlled heating, that is, you set the temperature below a certain temperature to start the electric heating, if it will not be set, press the heat preservation cycle button for 10 seconds (restore factory settings).

What happens if Huangming Solar presses the electric heat? How about turning it off??

Hello, it is a pleasure to serve you and give you the following answer: If you press the Huangming solar electric heater, the electric heat will start to heat up, emitting warm heat, and make the room warm. To turn off the Huangming solar electric heating, you can press the switch of the electric heating, and flush it to stop the electric heating, so as to achieve the purpose of turning off the electric heating.

In addition, Qingchun can also be judged to be resistant to unplugging the power plug of the electric heating, so as to completely disconnect the power supply and achieve the purpose of turning off the electric heating.