-
1.First of all, the phone system malfunctioned, so there was a problem with the battery level display. This kind of problem is the easiest to solve, you can directly shut down and restart, which is equivalent to data refresh, and the general power display will return to normal.
2.Second, the charger is malfunctioning. This malfunction is the main reason why the phone cannot be charged.
So how to judge the quality of the charger. It's actually very simple, try it with another charger. If it can be charged, then it can be concluded that the charger is faulty.
3.Thirdly, the charger and the phone are in poor contact. This is also a common situation where the charger is not plugged in properly due to carelessness on the part of the phone user. The solution is simple, it is to switch sockets back and forth.
4.Clause. Fourth, there is a problem with the mobile phone battery.
Generally speaking, it is rare to have problems with your phone's battery. But once there is a problem, it is a big problem and must be taken seriously. Therefore, when it is found that the charger and mobile phone system are not faulty, you should focus on checking the battery.
If you find that the battery is swollen, then it means that there is a problem with the battery and you must stop using it immediately.
5.Clause. Fifth, there are quality problems with the mobile phone itself. If you buy a copycat phone, then there is a high probability that the mobile phone will malfunction. If it is a brand machine, it needs to be returned to the original factory for processing.
-
For the problem of not being able to charge, it is recommended to replace the new battery to see if it is a problem with the mobile phone or a problem with the mobile phone battery, you can replace the authentic original mobile phone battery, or use a commercial battery of a well-known brand such as a domestic Hony battery with guaranteed quality, if the new battery can be charged normally, then it means that the previous mobile phone battery is not good.
-
Try it with (universal charge), but if it doesn't work, the battery is broken.
-
The charging cable is broken, and it is replaced.
-
Nokia 5230 Introduction:
1. The Nokia 5230 is a sleek widescreen touchphone that gives you easy access to your library and favorite social networks. It uses a CMOS sensing element, and the keyboard uses a virtual QWERTY key for the first time. Nokia 5230 is the third touch smartphone launched by Nokia, its three dimensions are 111, the screen is equipped with an inch 16 million colors 360 640 pixels touch screen, a built-in 2 million pixel camera, the resolution supports up to 1600x1200 pixels**.
2. Nokia 5230 is equipped with Symbian S60 version 5 operating system, 434MHz ARM11 architecture processor, which can run third-party software well. Support GPS function, support A-GPS network assisted navigation function and the latest version of OVI map, built-in gravity sensor and distance sensor.
-
The data cable of this model of mobile phone is a data cable, and the charger is a charger, how can the data cable be charged?!?
1.If you connect the cable on the charger to the computer, it can be charged!
2.If your family also uses a Nokia phone, many chargers can be used universally!
3.You can also buy another charger, the non-original kind is only 10 yuan!
4.It is recommended that you better not use a universal charge, which is inconvenient and not good for the battery.
-
It can be charged but not durable.
You can also buy a universal charge. 5-10 pieces.
-
First of all, the battery of Nokia clip electrodes is not recommended to be charged with universal charging, and it is also necessary to use a slide seat charger specifically for this electrode. There are two types of problems with your battery not turning on.
First: the gap between the clips of the electrodes is too large to exceed the contacts of the mobile phone, resulting in poor connection. If you look closely, if the gap is too large, use a needle to dial it.
Second: the battery is too low universal charger without low power activation function, resulting in the battery in a dormant state (below the working voltage), in this case, it is necessary to use a special charger or go to the repair shop to find a master to activate the battery with DC power supply (forcibly pull up the cell voltage).
-
The contacts on the battery may be loosened by the universal charger, and you use tweezers or something to clamp it.
-
It's best not to use the universal charge, my Nokia can't turn on the machine after charging it once, and I got it to customer service to test, and the battery has been scrapped
-
Maybe the electricity didn't rush in. It is best to go to the manufacturer to accompany a special charger, which is universal and full of dangers.
-
You can wipe the metal piece of the battery with something like an eraser, it may be that the local contact is poor, or it may be that the battery has been charged for too long by the universal charge, I have had this situation before, how can I not turn it on, and then it will be fine after a period of time.
-
Hello, this charging method I told you can improve the battery life. (1) Don't use up the electricity and then charge, see that the battery is almost out of power or the phone jumps out and says "the battery is low" to charge, if you wait until the phone automatically shuts down and then charges, it will have an impact on the battery life. (2) The charging time is best about 3-4 hours, or see the mobile phone screen showing that the battery is full, and then unplug the charger, some people charge the mobile phone overnight, which is actually not good for the battery.
3) Try to use the universal charger as little as possible, because sometimes we use the universal charger and find that it has been charged for a long time but there is still not much power, which is the case of leakage, and some inferior universal chargers are even more so, which may cause a short circuit in the battery, and finally lead to a reduction in battery life. (4) Many people say that it takes more than 12 hours to charge for the first time, which is also unscientific, because now the battery is charged when it leaves the factory, which means that the battery has been activated, and if it is charged for a long time, it will have an impact on the battery. (5) Try to turn off the charge, which does not have an impact on the battery, because if you turn on the computer, the sudden current will have an impact on the motherboard and chip inside, resulting in a shortening of the overall life of the device.
6) Take out the battery less, and don't put it with metal objects after taking it out, because we often find that after putting the battery and metal objects together, the original full battery suddenly runs out, this is because the metal is conductive, and the battery will put the power into the metal, which may cause damage to the battery, in this case, you should use direct charging to charge, never use universal charging, because this will lead to a short circuit!
-
Usually, as long as you don't run out of electricity, you can charge it, more than one bar is fine, and it won't hurt to recharge it after running out a few times once in a while.
The time can also be set at will.
The main reason is that the 5530 uses a lithium battery (at present, the vast majority of mobile phones use lithium batteries) and the previous battery (a long time, the kind from a few years ago) is not the same.
If you still have questions, you can ask directly on the team's official post bar.
-
It's time to charge before the automatic shutdown. Generally, the mobile phone prompts that the charging is complete. It's time to stop...
Don't believe the on the Internet about what you need to do for 12 hours... That's the old battery in the past, and the current lithium battery has no memory effect...
Let's be honest ... Your topic is amazing...
Normal, two hours QQ, you can still watch 90 minutes of movies, your battery is already good, many friends can't reach this state!
There are many users who often leave their mobile phones on while charging, which will actually harm the life of the mobile phone. Because in the process of charging, the circuit board of the mobile phone will heat up, and if there is an external ** at this time, it may generate an instantaneous backflow current, causing damage to the internal parts of the mobile phone. >>>More
1. Activate the new battery.
When a new laptop battery is first turned on, the battery itself should have more than 70 charges (this is also a common practice for manufacturers). If you open the laptop you bought for the first time and find that the battery is fully charged or more than 70% charged, it means that the manufacturer has done a factory test). At this time, you should fully charge the battery, the charging time must be more than 12 hours, and then set the battery to turn off when the battery is 5% power, and repeat it three times, so that the battery can be completely activated, which can effectively improve the service life of the battery. >>>More
Probably because the battery power is not the same, the voltage and current of the charger do not match, it should be that the charger current of 81 is greater than the original charger current of 6300. It will damage the mobile phone battery for a long time. The original charger in the store is about eighty or ninety. >>>More
1.A mobile phone battery consists of three parts: the cell, the protective circuit, and the shell. >>>More