Lenovo M7600 printer how to add toner and reset

All-in-one printer cartridge clearing method: Turn off the machine, press and hold the function while turning on, and do not let go of the hand to turn on the machine, enter the maintenance mode, turn to the 84 function item, press OK, use the flip down key to find "Process Check", press OK, press the button, turn off the normal boot screen.

Proces Check》 Use the down key to find the toner cart reset Press OK to power off Press and hold the function button again to enter the repair mode Find 84 Press OK Find the checker mode off Press OK Shut down Everything OK Restart the machine.

Find Device Information, everything you need is in it.

IDEA Forum:

Think Forum:

Lenovo Community.

Find the Clear Return key and press the Clear Return key once.

Tool: Lenovo M7216NWA printer.

1. Turn on the printer and face the printer.

2. Then open the front cover from both sides of the printing machine to the inside, as shown below.

3. Press and hold the "Confirm" button on the printer's keyboard.

4. A prompt to replace the toner cartridge will appear on the display, then let go of your finger.

5. Click the "Start" button in the bottom right corner of the printer's keyboard.

6. Press the 1 button on the keyboard twice in a row.

7. Press the "Start" button in the lower right corner again.

8. Close the front cover of the printer and clear it.

First, open the front cover of the machine when the printer is in standby.

2. Press the "Clear" and "Start" buttons in turn.

3. The screen is blank.

4. Press the digital "0" button twice, the screen displays "00 Accept", press the "OK" button once to close the front cover of the machine, and the clearing is over. It's all done. The M8650DN printer cartridge has been cleared.

Precautions: Method 1: Use the key method to eliminate the information of the clear spike type, press and hold the light fully on, then press twice the light is fully on, and then press the light all on five times, and turn it off and turn it on. If this method doesn't work, use it.

Method 2: Press and hold the door switch, and touch the compact sensor switch twice the moment the machine starts. Just turn it on and turn it off. It may not work once, just 2 3 4 5 6 7 times the action of the heavy clan.

Just turn it off and turn it on.

This is an all-in-one machine, after replacing the original consumables, the device will automatically read the consumables chip, and it will be automatically cleared.

Tool Material: Lenovo M7400 printer.

1. First open the front cover of the Lenovo M7400 printer.

2. Then press the "Clear Back" button on the Lenovo M7400 printer operation panel.

3. Then put in the new toner cartridge of the Lenovo M7400 printer.

4. After that, the display screen of the Lenovo M7400 printer operation panel will have the words "whether to replace the toner cartridge".

5. Secondly, press the "Start" button on the operation panel of the Lenovo M7400 printer, and then press the " " button.

6. At this time, the display screen of the Lenovo M7400 printer operation panel will appear with the word "01".

7. Finally, close the front cover of the Lenovo M7400 printer.

Lenovo M7400 powder clearing method:

After adding powder, put the toner cartridge into the machine, power on, open the front cover (the front panel that opens when the toner cartridge is inserted), press the "Clear Return" button, then press "Start", then press the "+" button, press 11 times, "11" is displayed, and then press the "Confirm" button, accept it, and the machine can work normally;

After adding powder, put the toner cartridge into the machine, turn on the power, open the front cover (the front panel that opens when the toner cartridge is inserted), press the "Clear Return" button, then press the "*" button and then press the "0" button 2 times, and then press the "Confirm" button, accept, pass, the machine can work normally;

If the printer works for a period of time, the amount of powder prompted by the spike machine is low, as long as there is powder in the powder box, it can continue to be cleared and used in this way;

You can call 400-810-1234 (for areas where the 400 service is not opened, please call 010-82879600) to contact the printer engineer and ask the engineer to guide you through the operation.

According to the specific problem type, the steps are disassembled, the cause is analyzed, the content is expanded, etc. Keep an eye on your pants.

The steps are as follows: The main reasons for this are:

Summary. This situation is most likely caused by the lack of a zeroing printer, and you can press the [Clear Return] button on the control panel after replacing the ink cartridge to perform the zeroing operation.

What should I do if the Lenovo CM7120W printer keeps showing replacement toner cartridge?

This situation is most likely caused by the lack of a zeroing printer, and you can press the [Clear Return] button on the control panel after replacing the ink cartridge to perform the zeroing operation.

1. You can try to clear the printer to see if it can solve this problem; 2. Generally, there will be a [Clear Return] button on the control panel of the printer, after replacing the ink cartridge, don't close the lid first, press the clear button; 3. After pressing, a query will appear on the display screen to replace the toner cartridge, press the [Start] button, and then press the number button twice; 4. Generally, there will be relevant completion prompts, and the lid can be closed at this time;

Lenovo printer LaserJet Pro M132A, does the ink cartridge need to be cleared before it can be used normally?

Yes. Be clear.

Purge. How to clean up?

This situation is most likely caused by the lack of a zeroing printer, and you can press the [Clear Return] button on the control panel after replacing the ink cartridge to perform the zeroing operation.

On the machine, where is the control panel? (My model is M132A).

Inside the computer. Computer control panel.

Very small printer, no computer, a very small square operating panel with two lights constantly flashing.

These two lights are flashing all the time, what should I do? How to clear zero.

Press and hold the paper feed button and the cleaning button at the same time to turn on, wait for the power light to flash twice and release the paper feed button and the cleaning button, wait for the power light to flash twice again, press and hold the cleaning button for ten seconds, then all the indicator lights flash at the same time, and the clearing (reset) is over.