What kind of people are suitable for different materials of watches?

People with allergies are not with a watch with a belt or steel band, but can wear a titanium or ceramic watch. Generally speaking, titanium is suitable for watches although there are people. There are also some people whose body has a particularly large magnetic field, so a steel mechanical watch is not suitable.

Choose between a quartz watch or a mechanical watch in gold, platinum or rose gold.

In summer, the watch with a metal chain strap is easy to sweat and damage the leather, but in winter, you can wear a leather watch, which is soft and has a constant temperature. In general, it varies from person to person.

<>1. Stainless steel watches are the best.

2. In the metal strap, stainless steel is the most common material, compared with other metal materials, it is the best to take the draft, the key is strong and durable, also known as steel. The disadvantage is that it is prone to scratches. Stainless steel was discovered in the mid-19th century by the company Krapp in Essen, Germany, and subsequently became widely used by the public in the 50s of the 20th century.

3. The stainless steel used in the general brand is 316L stainless steel, which has good corrosion resistance and wear resistance, and the surface can be electroplated or not, only polished or sandblasted and sand-drawn, forming a three-dimensional appearance effect with different effects. Stainless steel straps are masculine, tough, durable, and easy to care for, making them one of the most common strap materials. In addition, the stainless steel strap is waterproof to a certain extent, but it can rust or damage if not properly maintained.

Dial: Mainly used to display the time. The material can be roughly divided into metal, ***, carbon fiber, color shell, enamel, etc.

Most of the common lacquered dials are made of brass.

Sapphire glass, mineral crystal glass, stainless steel, wear-resistant resin, carbon fiber, composite plastic steel. I suggest you go to Hourly Meike** to see, I'm currently buying a Swatch watch there**.

Common watch dials are made of the following four materials:

1.The metal dial can be divided into 925 sterling silver dial and lacquered dial, of which the lacquered dial is made of brass as the main material, which is the most common one.

2.Enamel dials are generally used in luxury watches.

3.Mother-of-pearl dials are most often paired with women's watches, and the shell material is used to create dials, allowing you to feel the variety of colors depending on the angle of view.

4.Carbon fiber has not been used for a long time in dial making, but it is often used in sports watches because of its fiber-like flexibility, light weight, and various excellent properties of carbon elements, such as corrosion resistance and heat resistance.

Watch material: 1. Stainless steel is the most widely used watch material, and there are mainly 316 stainless steel and 304 stainless steel. Among them, 316 stainless steel is the case material of mid-to-high-end watches, because it contains molybdenum elements, it is more corrosion-resistant than 304, and the grade is high, ** is also more expensive than 304 steel, and it is usually called "stainless steel" in the industry.

2. Carbon fiber material (cabon fiber) has been more and more widely used in the field of watchmaking in recent years. The carbon fiber is black. At present, the vast majority of the products sold on the market are made of solid-phase carbonization of polypropylene fibers.

The production process can be roughly divided into several steps such as pre-nurture, carbonization, and graphitization, and the carbon content of the finished product is basically more than 90%. The threshold for the R&D and production of carbon fiber is very high, and there are complex and strict technical requirements from the production of precursor yarn to the carbonization process. There are many countries in the world, including China, that can produce carbon fiber, but in terms of scale, quality and capacity, Japan is still the world's largest carbon fiber producer today.

Mitsubishi, Toray, and Toho account for more than 80% of global carbon fiber production, and all three companies have been expanding production in recent years to meet market demand.

3. Silicone, as the new favorite of strap material, often appears in sports watches and diving watches. On the surface, this strap is similar to a traditional rubber strap, but it seems to be different. Silicone is a large family, divided into two families: inorganic silicone and organic silicone.

Inorganic silica gel is a highly active adsorption material, which is usually prepared by reacting sodium silicate and sulfuric acid, and through a series of post-treatment processes such as aging and acid foaming. Its main ingredient is silica, which has a sponge-like structure. The interconnected pores form a capillary pore adsorption system with a large surface area, which can adsorb and condense water vapor equivalent to 40% of its own weight, so it is mostly used as a desiccant.

Although inorganic silicone is not used to make watch straps, it is often used in the care of watches--- as long as the silicone particles and the water in the watch are placed in an airtight container, and the water in the watch is removed after a few hours, then the water in the watch will disappear.

There are woody ones, generally with hardwood, such as mahogany. There is no stone, but there are ceramic. And the glass ones.

Eyewear glue. All kinds of up materials, metals, alloys, copper, these two materials must be electroplated. Stainless steel can be non-plating, and if electroplated, it is a decorative color.

There are also aluminum, gold, silver, etc. If you want to make watches as a layman, if you mean that you organize the production of watches yourself, I am really worried about you, if you mean to make personalized watches, or commemorative watches, then there is nothing to blame. If you really want to get into the industry, I might be able to help you with a thing or two.

The core of the watch is the movement, so I don't want to make it myself.

The rest is the bracelet and the watch, the bracelet metal is good, it is glossy after electroplating, it should not be worn, stone and wood, you have to consider their hardness, the hand does not necessarily hit something when, and how embarrassing it is to break when the time comes.

The most important thing about the bracelet is the flexibility between the knots, which is not easy to master.

If you don't want to be sapphire, you will be the first choice, wear-resistant, bright, I have a watch, I bought a watch, use a wallpaper knife, how to scratch sandpaper is fine.

In terms of technology, I can only look at it from the user's point of view.

High-tech ceramic strap.

In the world of watches, the main feature of high-tech ceramics is their resistance to wear and corrosion. The hardness of high-tech ceramic can reach 2,000 vick, which is much higher than the 150 900 wk hardness of stainless steel used in the model. So, whether you've been wearing it for a long time or over the years, the power of ceramic is to make this watch look the same as when you bought it.

In addition, high-tech ceramics will not be transmitted to its material due to the hot air or cold climate change outside, it changes with the body temperature of the human body, and it is a highly skin-friendly material.

2. Ultra-light soft Nylon strap.

When it comes to soft Nylon straps, IWC comes to mind, but the first image that flashes in the minds of many players in IWC is the flight of a battle. When it comes to flying timepieces, it's just too good. Then as far as the weight of the watch is concerned, it is not a matter of inches, but of "grams".

Therefore, in the choice of straps, it is also impossible to ignore the use of Nylon straps with ultra-light, soft, breathable and anti-wear characteristics to add points to the perfection of this watch. In fact, in addition to the above characteristics, this material is more worthy of advocacy because it is also environmentally friendly!

3. Titanium strap in line with the modern concept of environmental protection.

As is evident from the collection name of the model, titanium is the highlight of this watch. One of the more intuitive points is the feel. Titanium is half as light as metal and 3 times stronger than steel, so if you don't want to put a lot of weight on your wrists, but have high requirements for wear resistance and erosion resistance, then there seems to be no better fit for you.

In addition to the tactile sensation, titanium does not contain nickel, which can effectively prevent allergies. If you are still a gentleman who advocates environmental protection, I would also like to tell you that this titanium can be 100% recycled, absolutely not causing trouble to the society, and at the same time, it is absolutely in line with your environmental protection needs.

Fourth, composite material strap.

As the name suggests, these are straps designed with special care in mind. They are no less technical than the development of a new accessory for a horology. Take the strap of the Zenrich's zero-gravity tourbillon watch, it is actually necessary to integrate the rare metal titanium and bulletproof vest Kevlar fiber in a state of ensuring complementary advantages to provide the most perfect demand guarantee for this watch.

As you can imagine, the weight of the strap weighs!

5. Silicone rubber strap.

The silicone rubber strap has a high degree of ductility and elasticity, which is easy to clean and not easy to harden, and increases the service life. In addition, the length of the strap can be precisely adjusted to ensure that the strap can extend itself with the extension of the muscles of the wrist during the swing, so that it fits perfectly and comfortably on the wrist, and it is not easy to cause the wrist to be injured by repeated and violent impacts of the watch during the swing.

6. Canvas. Add.

1 Lange & Söhne. richard lange tourbillon“pour le mérite”

Langehard Lange Tourbillon "Pour le Mérite".

The case is made of honey-coloured gold, an innovative gold alloy with a Vickers hardness of up to 300 HV, which is much stronger than other alloys. The dial, made of the same material, is decorated with a pattern called "tremblage", a traditional engraving technique. The engraver continuously circles the liner in eight different directions to create a grainy texture similar to that of a three-dimensional wrought polish.

2 of all nations. Ingenieur split-seconds chronograph titanium.

IWC Ingenieur split-seconds chronograph titanium.

Powered by the 79230 calibre, this timepiece is housed in a 45 mm titanium case with a satin-finish finish that gives it a silky finish. The bezel is covered with five screws with a diamond-like carbon coating (DLC for short). Titanium is 43% lighter than stainless steel, yet has excellent overall corrosion resistance and very low thermal and electrical conductivity.

3 Panerai.

luminor submersible 1950 3 days automatic bronzo——pam00382

Panerai Luminor Submersible 1950 3 Days Automatic Bronzo – PAM00382

Bronze is an alloy of copper with another metal, usually tin, in which other chemical elements are added to achieve specific properties. This bronze is CuSN8, an alloy of copper and pure tin, which has excellent resistance to seawater and atmospheric factors. In addition to its high structural strength, the material retains the soft tones of the raw material, and the rust color that develops over time creates a quaint feel.

4 Montblanc.

Sporty tantalum metal self-winding chronograph.

Montblanc Sport Tantalum Metal Automatic Chronograph.

The case is made of dark gray tantalum metal, which is very complex and difficult due to its physical properties such as high density, high ductility, high melting point and corrosion resistance, especially in the later stages of polishing, so it is very rare. Tantalum has excellent stability and will not cause allergies in humans.

Is there a distinctive watch with colored paper, and now the brand's watches are not ordinary, no matter what aspect is not ordinary, the characteristic material of the watch is very remarkable.

When you buy a watch, you buy a famous brand, such as a Rolex watch, which has been worn for many years without a single scratch on the glass cover, like new, and the time is also accurate.

There are watches with distinctive financial quality, such as West Iron Cheng, Plum Blossom, and Swiss watches, all of which are high-end.

There are many of these types of watches, depending on what price you want.

Innovative and stylish watch bar.

Wooden? I've seen a few wooden watches before, but the one that impressed me the most was Jacques Lemans' Eco Power Solar Wood collection, which is said to be a strap made of ebony walnut.

This I would, a watch with a strap and dial made of apple skin, is a tweed watch from the Austrian brand Jacques Lemans, but it doesn't seem to be thought of saying that it is made of apple skin haha.

I don't know what you want, but if you just buy it to see the time, it's recommended to start ordinary.

In the history of the development of watches, from the beginning of the use of steel, silver, copper and other materials, to the later use of a variety of lightweight, rare and other high-tech materials, has gone through a long history of development, and finally recognized by the public and the market, the high-tech materials inherited to this day are ceramics, titanium, the most widely used, some of them are high wear-resistant, some are high light, and some are loved by people from all walks of life.