Roewe 350 oil wrench elimination, how to disassemble Roewe 350 oil check valve

You need to go to the 4S store and ask the staff to use the computer to eliminate the oil wrench logo, and the user cannot operate it personally.

Dashboard ID:

1. Prompt identification of the basic situation of the vehicle.

The most common and commonly used icons are: door prompt, handbrake prompt, seat belt prompt, engine self-check, lubricating oil condition check, ABS system check, airbag check, battery reminder and fuel level reminder.

2. Lighting information prompt signs.

In addition to some of the signs on vehicle safety just prompted in the dashboard, there is also a part that is also very important, and its existence is even related to the safety of our driving, that is, the light reminder signs. However, it is also necessary to remind you here that if you see the lights on the dashboard, the corresponding lights may not actually be on, so we need to check whether the lights are normal during the use process, because especially when driving at night, there are no lights, and even improper use of lights will have the hidden danger of traffic accidents.

3. Gearbox vehicle driving status prompt identification.

Most models of automatic transmission models have also designed different modes to ensure the needs of different users in order to allow the owner to better control the vehicle.

4. Electronic safety device four-wheel drive system identification.

More than 90% of the cars on sale in China will have ABS anti-lock braking system, and as domestic consumers pay more and more attention to driving safety, many manufacturers have added some other electronic safety devices to their cars, which also makes many people do not know whether there is a problem with the vehicle when they see the relevant logo. The electronic safety system logos that can be seen on the instrument cluster today include the vehicle stability system, traction control system and tire pressure detection. The icons for these three functions, if they appear on the dashboard, indicate that your car may be in a dangerous situation.

5. Smart key prompt logo.

Do you still need a traditional key to drive? If your car has a proximity key and a push-start system, you can simply carry a "smart" key with you to open the door and start the car. However, this set of equipment is also not very good, that is, the smart key is far away from the car, so it cannot start the car, and the dashboard will prompt at this time.

Hello, this needs to go to the 4S shop with a computer for maintenance and reset. I can't get other ways, I hope it can help you [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

1) Turn off the ignition key. Close the doors and other electrical equipment in the car (such as CD or headlight appliances, etc.).

2) Then press and hold the two arrows at the same time, do not loosen, and turn on the ignition.

3) Press and hold the button for about 3 seconds (time) and release the button.

4) After completing the above operations, the instrument panel will pop up the "Reset to Zero Menu" about maintenance, prompting (asking) whether to return to zero operation?

5) Immediately press and hold the "SET" button and hold "3s" or above (time).

6) Select the "Mode" button.

7) Turn off the ignition switch to complete the zeroing. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

1. Disassembly method: knock off the bearing, clean it up, add a nut with a 10cm screw, weld the male tooth and screw with a welding machine for the long point of the screw, and then use the male tooth to go in, and then use a tool to pull it out. It is best to replace it at the 4S store.

2. In terms of interior, the interior materials of Cruze are high-end, and there are decorative panels and door trims of different colors, which are destroyed and matte materials are used to enhance the overall texture of the interior and ensure that Cruze (Cruze) has a high interior design. The interior is built and fitted with excellent ruler craftsmanship, the seams and connections are treated almost perfectly, the shield-shaped center console design is avant-garde, and the V-shaped center console layout makes the interior very harmonious.

3. In terms of configuration, the V-shaped three-spoke steering wheel is a popular style of general use, echoing the shape of the V-shaped center console, and the design of the roller-type button fiber letter liquid makes the operation more convenient, and integrates the control buttons of Bluetooth, audio, cruise control and other functions. The twin-tube instrument cluster is highly recognizable, and the cylindrical metal frame also echoes the car's sporty appearance. The infotainment system offers a wide range of features, including a GPS satellite navigation system with voice recognition and a large 7-inch display.

Roewe 350 maintenance lamp zero method: 1. Turn off the ignition switch; 2. Press and hold the buttons of the two arrows and do not let go, and turn on the ignition switch; 3. After the ignition switch is turned on for about 3 seconds, release the buttons of the two arrows; 4. At this time, a maintenance menu will appear on the monitor, asking whether it is reset to zero; 5. Press and hold the "set" reset button for more than 3 seconds; 6. Press the "mode" button; 7. Turn off the ignition switch, and the maintenance light can be reset to zero.

The Roewe 350S maintenance light is zeroed in the same way. The role of the maintenance light is to record the mileage of some important accessories and alert the car owner and car maintenance workers. When the maintenance light is on, it means that the car needs maintenance, which is divided into small maintenance and large maintenance.

The main items of minor maintenance are changing the oil and machine filter; If it is a major maintenance, the maintenance items will be increased. According to the mileage or time of the car, it is a way that more car owners can accept. The mileage and time are based on the first one.

If the maintenance time is up, but the mileage is not reached, it is also necessary to carry out maintenance. Because the engine oil has a shelf life, even if it is not turned on, after a long time, the lubrication effect will be reduced, which will affect the performance of the engine, so it needs to be replaced in time. If the car has reached the required maintenance mileage, it needs to be serviced even if the maintenance time is not reached.

Because the number of vehicles used is directly proportional to fuel consumption, the more you drive, the faster the fuel will be used, and the more wear and tear on the tires and brake pads will be, so they need to be maintained and replaced.

Millions of car purchase subsidies.

Steps: 1) Turn off the ignition.

2) Press and hold both arrows at the same time, then turn on the ignition.

3) After about 3s, release the two arrows and press the twist.

4) The reset menu appears and asks if it is reset to zero.

5) Press and hold SET (to zero) for more than 3s.

6) Press the Mode button.

7) Turn off the ignition switch to complete the zeroing. Hope it helps.

Roewe 350:

The Roewe 350 is a compact sedan launched by SAIC Motor after the Roewe 750 and Roewe 550 and is positioned in the A-segment market, and it is also the first family car to incorporate 3G technology. SAIC Minggao said that the Roewe 350 is mainly a family car for young people who love life, and of course, it is also a city car suitable for Chinese families of three.

Car interior: 1. The interior of the Roewe 350 adheres to the family-style T-shaped style, but the bend is not too gorgeous, and instead uses a simple description to build a sports trend. The application of two-tone interior is the design direction of the home, and the wood grain interior inserted in the middle is also relatively high-grade.

The manufacturer also offers an optional black interior.

2. The matte black paint surface of the upper part of the Roewe 350 central control panel with chrome edging looks very classy, and the air conditioning control panel is a light-colored interior, and the buttons are slightly larger to bury Nianchun, which provides convenience for operation. The LCD screen enhances the overall sense of science and technology, the LCD screen integrates navigation, six-disc CD sound control and reversing image, and the on-board 3G concept created by Roewe gives the LCD screen more functions. **The knob is also a button for temperature adjustment, and the high level of integration also makes people feel more luxurious.

The 350 holographic digital instrument panel with a sense of science and technology has a self-luminous function, full of science and technology, and the overall display effect is also very clear, so that the necessary information in the driving process is clear at a glance.

Hello, hello, the instrument panel right side of the front side button to manually zero, the specific steps are as follows: (1) Turn off the ignition (2) Press and hold the two arrows at the same time, and then turn on the ignition. 3) After about 3s, release the two arrows and press the twist.

4) The reset menu appears and asks if you want to reset to zero (5) Press and hold SET (return to zero) and hold for more than 3s. Gene (6) press the mode (mode) button (7) turn off the ignition switch to complete the zero Changchang. Hope it helps.

Hello, you can find it by looking it up on the Internet.

1. Power on the vehicle, twist the key to the energized position with your right hand, and do not start the car;

2. Don't let go of the reset button installed on the left hand, the reset button is at the bottom right of the odometer;

3. Twist the key to the energized position with the right hand, that is, turn on the ignition switch;

4. Don't start the car, hold down the button with your left hand;

5. Wait for the dashboard to stop flashing and then release the left hand button;

6. Turn off the power and turn on the power supply, and the wrench is no longer displayed.

1. Power on the vehicle, twist the key to the energized position with your right hand, and don't stop the car;

2. Don't let go of the reset button installed on the left hand, the reset button is at the bottom right of the odometer;

3. Twist the key to the energized position with the right hand, that is, turn on the ignition switch;

4. Don't start the car, hold down the button with your left hand;

5. Wait for the dashboard to stop flashing and then release the left hand button;

6. Turn off the power and then connect the power supply of the staring fan, check this and find that the wrench is no longer displayed.

Hello! The steps to eliminate the wrench light in the Roewe 350s are:

1.Power on the vehicle, press the car key to the power-on position with your right hand, and do not start the car;

2.Do not let go of the reset button on the left hand to beat the sail, and press the He Cong button at the bottom right of the odometer;

3.With the right hand, press the car key to the potential code hail, that is, turn on the ignition switch;

4.Do not start the car, hold down the button with your left hand;

5.Wait for the dashboard to stop flashing and release the left hand button;