What kind of LCD TV can be moisture proof?

I haven't heard of a special moisture-proof display, as long as you turn it on every day, there is no problem, household appliances are afraid of not being used, so it will be bad when wet, and it is okay for you to use it every day, unless the life is up to Hehe.

If you open it for more than 5 hours a day, you can prevent moisture!

IPS hard screen LCD TV moisture-proof,

You just don't leave it on.

If it is determined that it is damp,It is best to blow it with a hair dryer first,Dry the moisture in the TV,Then turn on this comparison of the TV,Otherwise, the moisture inside is more serious,Then turn on the TV is easy to cause a short circuit on the circuit board,Cause losses。 If you are not sure, you can ask a professional person to repair it.

Nowadays, because of the development of the network, the frequency of use of TVs in many families is relatively low, so to make the TV not damp or less malfunctioning, you can turn on the TV every one or two weeks, which will play a role in driving away the tide. When the home TV is determined to be due to moisture and cannot operate normally, it is necessary to cut off the power supply and put the TV in a ventilated and dry place, not because the sun shines, so that it will be relieved.

Buying a home dehumidifier can solve your troubles! Hangzhou Matsui Electric Company serves you. **0571-81372351

Allow to dry by natural ventilation and do not turn it on.

It's okay, just let him have a while.

1. The placement of the TV is very important, the TV should not be close to the wall, and about 10cm should be reserved for ventilation only; Do not put it under the window sill to avoid dampness caused by rain and water leakage on the window sill; In humid conditions, avoid the approach of water vapor, and do not place wet objects such as fish tanks and vases nearby.

2. When the weather is humid, the TV can be put into standby mode, because during the standby process, the internal transformer and other parts in the working state will emit heat, so the moisture in the body can be dispersed through this way of renting.

3. In humid weather, it is best to turn on the TV once a day and turn on the power to let the heat generated by the fuselage achieve the purpose of removing moisture, so as to ensure the dryness of the internal components of the TV and achieve the purpose of moisture-proof pads.

4. Place the desiccant. You can use a ready-made desiccant next to the TV or moisture-proof beads behind the TV. Lime can also be used to absorb lime moisture, lime is an adsorbent, in rainy days can be used cloth or sacks to wrap quicklime and placed in a relatively humid place, so that the indoor air to keep the sail dry.

5. The use of a humidifier can keep the room dry, but pay attention to the dehumidifier not to be placed too close to the TV, otherwise it is easy to affect the normal operation of the TV.

The above is an introduction to how to prevent moisture on LCD TVs, after all, an LCD TV is not cheap, so we must do a good job of moisture-proof work, especially in the south.

Categories: Life.

Analysis: First of all, attention should be paid to the maintenance of the TV and place it in a ventilated position.

Second, when the weather is humid, the TV can be put into standby, and the internal transformer and other working parts will emit heat during standby, so the moisture in the body can be dissipated in this way.

In addition, there are many small holes on the back shell of the TV, and dust will enter the inside of the TV through these holes over time, and when the weather is humid, the condensation will condense with the dust, resulting in the TV "crawling and leakage". Therefore, users can use a hair dryer to move the hair dryer up and down, left and right through the small holes in the back of the TV, and "expel the dust" and moisture inside the TV.

Summary. The solution to the dampness of the LCD TV is as follows.

The solution to the dampness of the LCD TV is as follows.

1. If the TV is unstable because of moisture, then the TV should be turned off, and the power supply of the TV should be cut, and then the shell of the TV should be disassembled with tools, but the mask should be noted that if you can't dismantle it, then don't do it, please help someone who understands to dismantle it, and only dismantle the simple shell, and the things that are too precise inside can't move it. At this time, Hongxiao can let the TV go to a dry and ventilated place and let it air dry naturally. After air drying, you can install the TV shell, and then turn on the TV**.

2、Sometimes after the TV is damp,Everyone will think that the image of the TV is damp,In fact, this is a wrong understanding,If the TV is normally damp,Then the picture tube is basically no problem,It may be that the tube socket in the TV is damp,If the tube socket is damp,Then you have to change the TV tube socket,Or let the tube seat air dry。

3. After the TV is damp, you can disassemble the shell of the TV, use the hair dryer to open the maximum hot air, and air dry the inside of the TV, which will help to speed up the drying speed of the TV, but when blowing the TV, the seal of the hair dryer should not be too close to the inside of the TV, so as to prevent the high temperature brought by the hair dryer or the parts of the hair dryer from touching the electric high TV machine. 4. If the TV is seriously damp, at this time, it is necessary to ask professional maintenance personnel, open the shell, and replace the high-voltage cap or the place that is easy to ignite in the TV, and when the TV image caused by moisture appears snowflakes, abnormal color and defects, etc., you should find the manufacturer of the TV for inspection, do not look for amateur small maintenance workers, so as not to repair the TV.