-
1. Make sure that the mobile phone bill is sufficient and the Internet access is normal.
2. The operator's network status is normal, and you can also access the Internet in another location.
3. Restart your phone.
4. Reinsert the mobile phone card, or replace the mobile phone card test, and it is recommended to replace the special small card for cutting the card.
5. Select the net access point in the phone settings >> Network >> APN >> and try it.
6. Reflash the firmware and clear the data.
7. Go to the local Meizu certification store for after-sales consultation.
-
If the mobile phone cannot access the Internet normally, you can troubleshoot according to the following conditions:
Situation 1] The contact between the SIM card and the metal contacts of the mobile phone is insufficient, and the SIM card can be reinserted.
Situation 2] If the SIM card is damaged or there is a problem with the mobile phone, you can change the phone to test whether it is the SIM card or the mobile phone is faulty.
Situation 3] The current location is a signal blind zone or suddenly no signal, you can change places to test and pay attention to whether the mobile phone signal of other users around you is normal.
Situation 4] If the mobile phone card is in arrears or is shut down, you can pay off the arrears and turn it on.
Situation 5] The service is suspended due to abnormal use of the number, such as the number being used for illegal or illegal activities.
Situation 6] Roaming in Taiwan, Hong Kong, Macao or abroad can only be used after enabling Taiwan, Hong Kong and Macao roaming and international roaming.
Situation 7] If the total traffic generated by the Internet reaches the ** traffic cap value in the current month, the system will automatically turn off the Internet access function, or limit the speed of the network, and the network will be automatically restored in the next month, which shall be subject to your ** traffic cap rules.
-
Some features of Meizu mobile phones show that the reason for no network connection is to restrict the application from connecting to the Internet, and the solution is as follows:
1. First of all, we will pull down the banner, find "Settings", and click on it.
2. On this page, we find "Traffic Management" and click to enter.
3. Then on this page, we will see our traffic usage, and we will click on the "Application Networking" below.
4. Then here are the applications that we can network, which are divided into traffic networking and wifi networking.
5. We only need to click on the blue tick to restore its networking.
-
Some apps cannot connect to the network after the network is enabled, please troubleshoot them based on the following conditions:
1. All programs cannot connect to the network: it may be caused by poor network environment, please make sure that the mobile phone has turned on the data network or connected to the wireless network;
2. One or several programs cannot be connected to the network: Flyme5 system users should enter Mobile Manager - > Traffic Management to check whether there is a network switch to close the corresponding program under the current access network (data network or wireless network), and it is impossible to connect to the network after closing (after the flyme6 system enters "Traffic Management", click "Network Control" to view);
In the case of wifi:
Please make sure that the Wi-Fi network is unobstructed, and whether the device cannot access the Internet; Please make sure that the router settings are correct, such as the Internet access method and account password, etc.; If the signal is too weak, you may not be able to connect to the Internet, so please stay close to your router.
Some public Wi-Fi may require secondary authentication before you can access the Internet, please open your mobile browser and pay attention to the relevant reminders on your mobile phone. If a certain software cannot access the Internet, please go to Mobile Manager - Traffic Management - Network Control to turn on the wireless network switch of the software.
-
There may be network delay, it is recommended to switch to a 4G network, or change the WiFi hotspot and try again. On August 8, 2018, Meizu released the more cost-effective flagship mobile phone Meizu 16, with first-class hardware configuration, excellent appearance design, and symmetrical full screen will bring you the ultimate experience.
-
1. First of all, open "Phone Manager" on the desktop of your phone
2. After opening Phone Manager, then open "Traffic Management" below, as shown in the figure below.
3. After opening the traffic management, then open the "network control" at the bottom of the page, < 4, and then find the browser you can't network to the network before, or other software in the network control, and then turn on the switch behind, as shown in the figure below.
-
My phone has been like this recently, have you got it done, can you teach me?
-
You have a limit in network management.
Meizu. If the facial recognition of the mobile phone cannot be recorded, it may be that the facial recognition module is damaged, or it may be caused by the bump of the mobile phone, and it is necessary to contact the relevant after-sales service personnel for maintenance; Or in the case of facial recognition, if there is an obstruction on the face or the face is not within the scope of recognition, Meizu cannot recognize the face.
1. Disconnect the mobile network of the Meizu phone.
Set up to ensure the wireless network of Meizu phones and TVs. >>>More
A feature that can't be discovered by others, Meizu privacy mode experience.
Hello, you can press and hold the power button and the volume plus key until the machine vibrates and then restarts, let go after seeing the meizu logo, at this time connect the phone to the computer, a storage disk will be recognized, and then go to the official website**The latest firmware is upgraded, and the upgrade can be turned on normally after the upgrade is completed. You can also try this method if you can't enter the system normally due to software. (Extension:.) >>>More
If the landlord is considering an Android machine.
The following common problems will be a little hot, software compatibility, restart, and the battery is not very resistant, and it is necessary to manage the self-start item, and in the face of mixed third-party applications, it is necessary to manage ads and various privacy permissions. >>>More