How to cast the screen of Meizu mobile phone to TV, how to project the screen of Meizu mobile phone,

1. Disconnect the mobile network of the Meizu phone.

Set up to ensure the wireless network of Meizu phones and TVs.

It is in the same wifi, which is convenient for the normal connection of the two.

3、Open the TV,My application,Find the relevant specific software,If there is, open it directly。 Similar functions can also be achieved by installing third-party screen mirroring software.

4. Click the connection of the Meizu mobile phone to cast the screen to the TV.

Meizu 16How to cast the screen to TV.

The most of it PConline IT encyclopedia.

Make sure that the phone and TV are on the same wifi, and turn on the [Settings] of the Meizu 16; Find the [Other Connection Methods] function option and click on it; After entering this option, find [Cast Screen] and click to enter; After turning on the switch behind [Cast Screen], it will automatically search for nearby available devices; Wait for the mobile phone and TV to connect successfully to cast the screen. The details are as follows:

1. Find the [Settings] option on the Meizu 16 desktop and click to enter;

2. After entering the settings, find the [Other Connection Methods] function option and click on it;

3. After entering this option, find [Cast Screen] and click to enter;

5. Just make sure that the mobile phone and TV are in the same wifi network to connect successfully; Then the Meizu 16 mobile phone screen will be displayed on the TV synchronously.

iOS: Put your phone and TV on the same network, open the control center on your phone, and select AirPlay screen mirroring and screen mirroring TV. Android:

1. After getting the Meizu phone and turning it on, open the main interface, the screen may show that different models may be different, just find the setting option;

2. Click Settings to enter the mobile phone settings interface, find other connection options in the interface, and then click to enter;

3. After entering other connection methods, you will find that there is an option to cast the screen, after turning it on, you can see what devices are available;

4. Open the network computer, find the application option, and then find the wireless display option, click to enter, different computers may operate differently, as long as you find the wireless display.

If you are using an OPPO phone, the setup method is as follows:

"Mobile phone screen projection" is also called multi-screen interaction, mobile phone screen projection, etc. on the OPPO mobile phone, and wireless display and miracast on the large screen device side. "Mobile phone screen projection" is a function that uses Wi-Fi display technology to synchronize all the content displayed on the mobile phone screen on large-screen devices such as TVs and projectors.

Conditions of use: Mobile phones and large-screen devices (TVs, projectors, etc.) must support the Miracast protocol.

Operation method: 1. Connect the mobile phone to the same Wi-Fi device (TV, projector, etc.) with the large screen.

2. Confirm that the wireless display, screen mirroring, multi-screen interaction or screen projection function is turned on on the large-screen device (the function name of different devices is different, please refer to the large-screen device manual for details).

5. Click on the large-screen device in the list to connect, after the connection is successful, you can enter the projection mode, and the mobile phone screen will be displayed on the large-screen device synchronously.

ColorOS 11 system version mobile phone screen projection added:

a.Screen projection: After projection, you can turn off the phone screen, and the projection content will not be interrupted.

c.Background projection: The projection content can be shrunk into a small window, which does not affect the mobile phone to do other operations.

After connecting the large-screen device with the screen projection of your mobile phone, click the permanent icon in the upper left corner, and the function panel will appear.

The mobile phone screen is projected to the screen through mirroring, and the screen only plays the role of a synchronous display screen, and will not save ** records on TV and other devices. However, it should be noted that when mirroring the screen, some private information on the phone will also appear on the TV screen. In addition to the above mobile phone screen projection methods, mobile phones can also achieve screen projection effects through DLNA (Digital Life Network Alliance) technology:

1. Connect the mobile phone to the same Wi-Fi device as the large-screen device.

1. Connect the mobile phone to the same Wi-Fi device as the large-screen device.

1. Projecting the screen, simply understood is to transmit the mobile phone wirelessly and completely synchronize it to the large monitor or TV. Required equipment: MX4 (or MX3, MX4 Pro, Meizu Note) mobile phone, TV with Miracast function (or normal monitor + Miracast connector + HDMI wiring), power supply, Wi-Fi.

2. Connect the monitor and Miracast connector with HDMI wiring first, and then connect the power supply to turn it on. Then turn on the phone - Settings - Display - Cast screen switch, which can automatically search for the device to connect.

3. The implementation process of Meizu Flyme projection screen is actually very simple, first use HDMI wiring to connect the monitor and Miracast connector, connect the power supply to turn on the TV or monitor. Then open "Cast Screen" in Settings - Other Connection Methods - Cast Screen in Meizu Flyme.

2. Click the [Cast Screen] option.

3. Turn on the switch on the right side of the projection screen, and select the TV device you want to cast the screen to connect.

This article takes Meizu 18 as an example and applies to the flyme9 system.

Using a mobile phone to project the screen to the computer, everyone must have used it a lot, but how to cast the screen of the mobile phone to another mobile phone, I don't know if you have used it?

Open the AirDroid Cast software on your phone, and click [Receive Projection] at the bottom to see that there is a set of projection codes.

Turn on AirDroid Cast on another mobile phone and enter the screen casting code on the receiving screen, and it will be automatically connected after the input is completed.

If it is the first time to connect, a pop-up window will appear on the phone to remind you whether to agree to cast the screen, you can choose to trust the device, and agree to the projection, and the screen on the other phone will appear on the phone.

After the screen projection is successful, you can click on the left side to rotate the screen, horizontally ** the mobile phone desktop, and you can press and hold the screen with two fingers to zoom out and enlarge the mobile phone desktop.

If you need to talk on your phone and phone, you can also turn on the "microphone" and "microphone" functions, so you can communicate even when you are not in the same place.

Give it a try!

You can only use one projection screen and use a network with TV to project the screen.

"Screen Mirroring" can be used to cast the screen to the TV with the help of the miracast function that comes with the TV.

How to use: 1. Make sure that the TV and mobile phone are connected to the same wifi;

2. OriginOS system: enter Settings - Other Networks and Connections - Screen Projection Mobile phone screen projection, after entering, you can search for Miracast device for screen mirroring and projection;

Funtouch OS IQOO UI system: Go to Settings - (Other Networks & Connections) - Smart Screen Mirroring Mobile Phone Screen Mirroring - Turn on the switch - Search for available devices for screen mirroring.

3、Whether the TV supports miracast,You need to check the TV manual or consult the TV manufacturer,There are many names of the projection function of the TV,For example:Multi-screen interaction、Mirroring、miracast, etc。 If the TV supports miracst, you need to turn on this function on the TV in advance so that the mobile phone can search for the corresponding device;

4. Screen mirroring, also known as multi-screen interaction on vivo's old models, the entry path is: Set multi-screen interaction;

Take Huawei P40, Android 11, and Aosoft projection as examples. Turn on your phone and tap on the corresponding software. Click on your profile picture in the top left corner.

Click Settings. Click Cast resolution. Select any resolution.

The resolution can be set successfully. <

Demo model: Huawei P40 System version: Android 11 App version: Acosoft projection Take Huawei P40, Android 11, Aopsoft projection as an example.

1. Open your phone and click on the corresponding software.

2. Click on your profile picture in the upper left corner.

3. Click Settings.

4. Click the projection resolution.

5. Select any resolution.

6. The resolution can be set successfully.

Connect your mobile phone to a large-screen display (such as a TV) through wireless screen projection, and when using the large-screen for office and entertainment, notifications such as call reminders, messages, and alarms will only be displayed on your mobile phone by default to protect privacy.

1.Depending on the model and function of the large-screen device, the options are as follows:

The large screen supports the Miracast protocol: turn on the settings switch for wireless screen projection on the large screen.

The large screen does not support the Miracast protocol: Insert the wireless screen projector into the HDMI port of the large screen and connect the power cable of the wireless screen projector.

Reminder: To find out whether the large-screen device supports the Miracast protocol and how to enable wireless screen projection on the large-screen device, please refer to the manual of the large-screen device or consult the equipment manufacturer.

2.Swipe down from the status bar of your phone to bring up the notification panel and light up the wifi icon.

4.Click the corresponding large-screen device name or wireless screen projector name in the device list to complete the screen projection.

After the connection is successful, the mobile phone will display horizontally and the large screen will be better. By default, notifications such as call reminders, messages, and alarms are only displayed on the mobile phone, not on the large screen. If you need to modify it, click the screen casting icon to turn off the message Do Not Disturb switch.

After completing the projection, click the projection icon to disconnect and exit the wireless projection.