What should I do with the Olympus EF250 when I turn on the say write protection? I can t take a pict

Let's take the card to the workshop!!

Olympus XD card can only be used to copy and paste when operating on the computer, other operations can not be used (such as: cutting, deleting, formatting, etc.) If the above operations are carried out, the XD card will be automatically protected against virus infection, that is, the so-called write protection, the write protection of the XD card cannot be recovered, and can only be repaired by the special software of the repair station.

If you buy an **xd card, it will be repaired for free within one year, and it will be repaired after one year.

For details, please visit Olympus official **!!

Personally, I think it's not a problem with your memory card, first see if the manual is likely to be caused by misoperation, check the reasons in two aspects, and finally go to Olympus after-sales service to understand.

The XD card has illegal content, it may be a virus, it may be an unrecognizable program.

You can use your computer to disinfect it, or you can save the data and format it in camera mode.

The problem of the card, save the data first, and it is OK to format the card, because there is damage to this problem, which can be used after formatting, and there will be such a problem in the future, it is recommended that you change the card.

It's easy! To write protection, first of all you have nothing important in your card!

If not, format it in the camera!

There are important things that are copied out after formatting!

If you don't want to format it directly on the camera.

Card. The SD card is write-protected, on the right side of the patterned face.

XD card, which should be similar.

There is a write protection switch on the left side of the SD card, and it is estimated that the write protection switch on your memory card is placed in the lock position!

There's a little thing on the side of the card that you broke to protect it. Just dial it back

See if there is a small switch on the card, just turn off the write protection, maybe you did it by mistake

The SD card is write-protected, on the side of the card. Maybe you're not careful, so let's break it and give it a try.

One case is that the MMC card is indeed write-protected, and the card has a write-protection switch.

In the second case, MMC does not have a write protection switch, and it is very abnormal to have write protection, not what is added to the card in the mobile phone.

Password or something, this is actually because the size of the card reader and the MMC card itself can not be completely contacted The working principle of MMC protection is actually to control the contact area of the metal contact point, if you can't ensure that all the metal pieces are pressed, it is the default to write protection switch on, which is also the practice of writing protection switches on RS MMC cards The solution is actually to find a piece of hard paper along with the front of the MMC card and insert it into the card reader to ensure that the metal sheet is completely in contact You can also press it into the card reader by hand Look at the front of the card reader, on the left side of the inside, there is a metal strip, as long as the metal strip touches the inner wall to your end, it is a writable state, if it can't be touched, it is a write protection state because you unplug and unplug more, so the metal strip loses its elasticity, and when the card is inserted, it cannot touch the inner wall. Use a knife or some other tool to bend the metal bar a little more, and when the card is inserted, it can be touched smoothly. Pay attention to the direction of the bend, and also pay attention to the bumps of the metal strip.

The three situations are that the MMC card is plugged and unplugged for a long time, resulting in oxidation or wear of the metal contact piece, and this situation is solved.

To deal with the memory module, find an eraser, wipe it back and forth on the metal sheet several times, and generally no major damage can be solved

The four situations are that there is a problem with the contact piece of the MMC card itself, or the life of the MMC card has expired, so you can only buy a new one or find a merchant.

Olympus's xd does not have a write protection switch, you can try to format the xd card on the camera first, if you can't format it, you can find an old Fujifilm digital camera, format it with the formatting tool that comes with the Fujifilm camera, and then go back to the Olympus camera and format it again (my Olympus camera 128M xd card was also in this situation some time ago, and it was solved with this method).

The reason for the occurrence of card write protection may be due to:

1. Caused by computer virus.

2. The camera is caused by an error when moving data when connecting to the computer, so it is best to copy it on the computer instead of cutting and moving it when copying ** in the future, and then delete it in a unified manner**!

First, the write protection switch of the memory card is toggled to the lock position, and it is good to dial it to the other side.

Second, the write-protection identification switch of the camera card slot is faulty, which needs to be repaired.

It is very likely that your SD card is fake, and it was given to the mall when you bought it. Chances are, I've had this problem as well

However, it could also be that you locked the card.

Just take out the card, there is a small button on the edge, you can slide, just pull to the other side.

I had some of these problems with my Oba camera at the time! At that time, it was because the folder was hidden! Just change it in the attributes!

But you don't know this question! Probably poisoned! It could also be that the card is broken!

It is recommended to try a different XD card!

I don't understand, maybe there's something wrong with the card.

The write protection of the camera memory card is turned on by you, take out the memory card, generally on the side of the memory card, there is a small slide switch, look closely, and very small English letters, slide the slider to "off", that is, "off", turn off the written protection of the storage.

Read the contents of the memory card with a card reader first, as the Olympus digital camera should be"xd"Yes, XD does not have a write protection switch, if the read and write are normal, back up the contents of the memory card, format it with the computer first, and then format it in the camera, it should be normal. The reason is that the written data is garbled, which affects the reading of the camera. If the card reader can't read the contents of the memory card, it means that the memory card is broken, there are many reasons, anyway, the data card is not expensive, you can buy another one...

Take out the memory card, look for it, and there's a little slider on top of it, and flip it to non-write protection.

Take out the XD card, there is a small square on the card that can be toggled, dial it and put it in the machine, if it doesn't work, you have to format the memory card.

Generally, if there is a write protection, it may be an XD card failure, and you can only call ** to Olympus customer service, which should be able to repair it for free.

There is another way you can try it.

1.Take the camera to format.

2.Connect the card reader to the computer and format it, then put it on the camera and format it.

3.I format it with a camera of Fuji and format it on a camera.

If you can't, you can only call ** to Olympus customer service.

This problem is generally caused by incorrect use, which is a problem that should be paid attention to when using a digital camera.

1: Do not unplug the flash memory card during the process of not shutting down;

2: When the digital camera or digital camcorder is about to run out of power, or when the voltage is low, it is best not to take pictures or take pictures.

3: When using the digital flash memory card to store **, it is best to leave a certain amount of space, and do not store all the digital flash memory cards, because if all the storage is full, it will also cause a logical error of reading and writing if he writes it again.

4: Try to handle the digital flash memory card with care, do not fall, hit, pinch, etc., which will easily cause damage; Avoid contact with high temperature, high humidity, strong magnetic field, and strong electric field.

5: If the flash memory card is found to be poisoned, you need to use the latest virus database to check and kill the virus of the flash memory card.