I accidentally logged out and forgot my username and password, what should I do?

Use Windows Key. The software is included in the system administrator password recovery and generates 3 files after running: And, the 3 files are only 50kb in total, short and concise.

Put these 3 files into any floppy disk, then use the XP installation disc to boot the computer, and press the F6 key during the boot process to have the system install third-party drivers. At this time, it is the best time for us to cut in, and the floppy disk will automatically jump to the windowskey interface. It will forcibly replace the administrator's password with"12345", so why worry about big things?

Hehe! When you restart, you will be asked to change your password again. (I don't know if it's supported.)

XP) still doesn't work like this: take the disk down, go to another machine to delete the sam file under the system installation directory system32 config, restart, at this time the administrator account has no password, log in to the system with the administrator account, do not need to enter any password, enter the system and then reset the login account password.

2. Log in with administrator, but the premise is that you haven't used this built-in account before.3 Try the security mode, he will show the built-in account himself, that is, press and hold F8 when you boot up, and then enter the safe mode, and the built-in account will also be displayed on the welcome screen, Generally, the built-in account does not set a password, but if there is only one user on the login interface, then you have been using the built-in account.

4. The key is to advance.

Take out the hard drive, replay it, or redo the system.

But none of the above is a good solution.

The details are as follows:First of all, think about it calmly and see if your username in another ** will recall the username you have forgotten.

Secondly, pay attention to the case of the letters, many of them cannot be logged in because they do not pay attention to the case. Sometimes, when you sign up, you use a capital letter and later forget it when you log in, which can also lead to "forgot" your username.

Many ** have the ability to retrieve your username, but you will need your email or mobile phone, or even your ID number.

The difference between an account and a username is as follows:

First, the combination is different.

1. Account: The account is composed of numbers, letters, and symbols, and generally does not support Chinese.

2. Username: The username can be composed of words, numbers, letters, and symbols, and supports Chinese.

2. The changes are different.

1. Account: Once the account is generated, it cannot be changed at will.

2. Username: After the username is generated, it can be changed at will.

Return the account password.

1. Log in to the registered email address when you registered your account, and find the account activation email.

2. According to the account activation email, find the account and login page.

3. After entering the login page, click "Forgot Password" on the page.

4. Enter the process page of password recovery, enter the account number and verification code that needs to be retrieved password, and click "Next"; If the 12306 account is bound to a mobile phone number, click "Get Verification Code" on the page.

5. After receiving the verification code on your mobile phone, fill in the corresponding verification code and click "Next".

6. After that, enter the link of filling in the new password and confirming the new password. Once the input is complete, click "Next".

7. Finally, you will see a prompt that the setting is successful, click "Login" in the page and log in again.

The method is as follows: press F11 to restore with one key when booting, and the password will be gone after recovery (unless it is backed up with a password), and you can enter it directly.

Disadvantages: It is easy for others to discover, and all the things in the C drive are restored to the same as when they were backed up (usually there is nothing, the other disks remain unchanged, only the application software installed during the backup), and the recovery time is long.

Or press F8 until you see "Safe Mode with Network Connection", then use the Enter key to select "Safe Mode with Network Connection", and then use the Enter key to select the system you want to enter.

After the dialog box pops up, you don't need to look at it, just select "Yes", and then wait patiently. Enter a call"administrator"system, it will go directly to "My Computer" and then right-click on "My Computer".

Go to "Explorer", then "Control Panel" on the left, then "User Account", see your username (e.g. hot), click on your username, and then find "Delete User Password".

After clicking, the password that has been set is deleted, and you can restart it at this time, and you can directly enter the user system. Disadvantages: easy for others to find, troublesome operation, and long time.

Hello dear<>

How to cancel if you forget the registered password is as follows: "1. Get back the Apple ID password first. 2. Open "Find My iPhone" on your iPhone.

3. Enter "Apple ID" and click "Forgot Apple ID and Password". 4. Enter the lock screen password and follow the prompts to change the password. 5. Make sure that the phone is set with a lock screen password and ** "Chazi Travel Find My iPhone", and make sure that the "Apple ID" has logged in to Apple's recovery password, and then you can log out.

Apple Inc) is an American high-tech company. Apple, with revenues of $365.8 billion,[169] was founded on April 1, 1976, by Steve Jobs, Steve Gary Wozniak, and Ronald Gerrard Wayne, among others, and named Apple Computer Inc, changed its name to Apple Inc. on January 9, 2007, and is headquartered in Cupertino, California. 1.Thank you for your patience.

The above is my full reply 2Do you have any other questions?I can go on and on to answer your questions<>

3.I hope this service can help you, quietly you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Good luck;Have a good life and everything goes well!

4.If you are satisfied with my service, please give a thumbs up and wish you all the best <> again

<> peace and joy.

It is understood that if you want to log in to the national enterprise information register cover credit publicity system, you do not need to use the login password, and the login method is as follows: 1. The industrial and commercial liaison person logs in, that is, the banquet is made into the unified social credit** registration number, enterprise liaison ID card number, enterprise (individual, agricultural college) name, enterprise liaison name, The mobile phone number and verification code of the enterprise liaison can log in to the system, and the posture is as follows: Of course, if the industrial and commercial liaison person changes, he must go to the industrial and commercial bureau in time to change the registration, so as not to affect the normal login of the system;2. Electronic business license login, that is, obtain login*** and complete the scan code login.