How to adjust the heating plate of the labeling machine? How to debug the heat transfer machine, how

In this case, it is necessary to adjust the regulator, and if it is within the range of simple adjustment, it can be adjusted completely with the panel.

I said that if you want to adjust, it's very simple, you go directly to one of his admin panels and make an adjustment.

Generally, if you want to adjust the heating plate of this non-standard machine, in fact, you can use all the information at hand, or you ask the customer service, and the general customer service will know how to adjust it.

If the heating plate of the standard machine is to be adjusted, it should be operated according to the manual.

How to adjust the heating plate of the target machine, you can consult the manufacturer or hint at Sun Bin to enter the treaty.

1. A certain inspection site should be reserved around the location where the plate heat exchanger is installed.

2. Before installation, the pipeline connected to it should be cleaned to avoid sand and gravel, oil stains, welding slag and other sundries from entering the plate heat exchanger, causing flow channel obstruction or damage to the plate.

3. If the medium contains particulate matter or debris, a filter or decontamination device should be installed at the inlet end of the heat exchanger to avoid blockage of the heat exchange equipment.

4. Check whether the pipeline connection is correct to avoid mixing the two mediums and causing adverse effects.

You can take a look at the manual, the manual has been introduced.

This is actually quite easy to adjust, well, you click to start with a micro-heat oven, and then you can adjust it.

That's a more serious problem, you can ask more people who know how to solve it in time to see if they can help you solve it, it's not something that can be solved by just helping others help you.

In this case, you must find its control panel, which can be adjusted on the control panel, and its adjustment effect is relatively good.

If you want to adjust it, it has a control panel where you can choose to adjust it, such as temperature and so on.

Now if you don't mark it, the heating plate, if the mediation is can be set up in the primeval setting, then set it, if you don't want to set it up, you look at the instructions.

If this kind of heating plate wants to be better adjusted, it must be adjusted in accordance with the standard operation in order to operate better and effectively.

How to adjust the target and heating plate? Isn't this from the product manual? Just take a look.

Turn on the power and turn on the "Power Switch", and the green "Power Indicator" will be on at this time, indicating that the device has been powered. 2. Turn on the "heating switch" and the equipment starts to run, and the red "heating indicator" is always on, indicating that the surface workbench is continuously heating up; Flashing indicates that the temperature is at constant temperature, and the surface table is heating up intermittently.

1. Pull up the direct pressure handle so that the heating plate is fully open. Plug in the power supply, turn on the power switch, and the indicator light is on; Note: Due to the high power of the machine, the whole machine must have a suitable and reliable protective ground wire!!

2. Temperature adjustment: press the "+" or "-" button to set the temperature, press the "+" button to increase the temperature setting value, and press the "-" button to decrease the temperature setting value.

3. Adjust the timer knob on the left side to the appropriate time to 10 seconds (the length of time depends on different materials);

4. When the temperature reaches the set value, the machine will automatically enter the constant temperature state;

5. Place the transfer material such as clothes and its flat on the printing table, and then stack the ** to be transferred, and press down the pressure handle; Note: The pressure should not be too high, otherwise it will cause the pressure handle to deform! The pressure should be adjusted beforehand.

6. When the time is up, the buzzer sounds, then lift the pressure handle up, take out the transferred material such as clothes, and tear off the bottom paper.

7. The temperature of baking metal plate is generally 170-200, and the time is 20-40 seconds; The temperature of baking porcelain plates is generally 200-220, and the time is 120-150 seconds; The temperature of baking fabric is generally 120-140 and the time is 5-10 seconds.

The core component of the heat transfer machine is the heating plate, so you should pay attention to it when choosing a heat transfer machine.

You'd better choose a temperature control with pt100 parameters? There is also the design of what your hotplate is doing that needs to be implemented on your needs.

I have solved one such issue, please refer to it.

Yes, it's so simple, making an electrical box and adding a thermoelectric ear can solve your problem.

Edge banding is an important process in the manufacturing process of panels. The quality of edge banding directly affects the quality, quality and grade of the product. Through edge banding, the appearance quality of the board can be well improved, and the corners of the board can be avoided from being damaged during transportation and use, and the veneer layer is lifted or peeled off, and at the same time, it can play the role of waterproofing, the release of harmful gases of the closed sliding cavity dust and reduce deformation, etc., and can also beautify the furniture and make the mood happy.

The raw materials used by panel furniture manufacturers are mainly particleboard, MDF and other wood-based panels, and the edge banding strips used are mainly PVC, polyester, melamine and wood strips. Different materials and sizes of edge banding strips use different edge banding equipment. Nowadays, there are two types of edge banding machines used by furniture manufacturers: manual straight curve edge banding machine and automatic linear edge banding machine.

The structure of the manual edge banding machine is relatively simple, and its installation, use and maintenance are relatively easy; Due to its complex structure, high manufacturing precision and high cost, the automatic linear edge banding machine is prone to this or that problem in the process of use. Therefore, the installation and commissioning of a fully automatic linear edge banding machine is an important guarantee for it to maintain a stable working state for a long time and complete high-quality edge banding operations.

You mean the auxiliary heating of the air conditioner! Or the auxiliary heating of the engine!

, the power auxiliary switch is opened with an inch.

1. It must be noted that the continuous use of such electric heating devices should be less than 240 and no more than 300 instantaneously.

2. Guowei silicone electric heating device can work and be under pressure, that is, the auxiliary pressing plate is used to make it close to the heated surface. At this time, the heat conduction is good, and when the temperature in the working area does not exceed 240, its power density can reach 3W cm2.

3. Under the condition of paste-type installation, the allowable working temperature is less than 150.

4. If it is a dry burning condition in the air, the power density should be less than 1w cm2 due to the temperature resistance of the material; In non-continuous working conditions, the power density can be reached.

5. The working voltage is selected based on the principle of high power-high voltage, low power-low voltage, and special needs can be excluded.

6. The power supply that meets the requirements of the instrument must be used, and the power socket should be a three-hole safety socket and a ground wire should be installed.

7. First of all, there will be a slight smoke, which is a normal phenomenon.

8. During use, the heating medium should be prevented from spilling out of the utensils and flowing into the box to damage the electrical appliances.

9. If there is a fault in use, the power supply should be cut off and then repaired.

10. It is forbidden to burn empty.

Thermostat, according to the temperature change of the working environment, physical deformation occurs inside the switch, resulting in some special effects, a series of automatic control elements that produce on-on or disconnection actions, also known as temperature control switches, temperature protectors, temperature controllers, referred to as thermostats. Or the temperature is transmitted to the temperature controller through the temperature protector, and the temperature controller issues a switch command to control the operation of the equipment to achieve the ideal temperature and energy saving effect, and its application range is very wide, according to different types of thermostats are used in many products such as home appliances, motors, refrigeration or heating.

Do you want to control the temperature of the hot plate or the temperature in the room? If it is the indoor temperature, you can use a contactor or relay to connect it in series, that is, use a thermostat to control the relay, if it is to control the temperature of the electric heating plate, you should use a sensor to put it on the electric heating plate, and then operate it as above.

Thermostats generally have two outputs, the main output is used to control the heating load, and one is used to output an over-temperature alarm. The input is connected to a thermocouple.

If the main output has switching, voltage, current output, and switching output, you can directly control the heating AC contactor!

The thermostat should be intelligent, and then the temperature measurement point should be selected appropriately.

There are two kinds of temperature controllers, which are simple, just connect the electric heating plate and the temperature controller in series.

If it is high-power, it is connected to the load side.

It's basically the same, but the difference is that the heat press machine can regulate the temperature

Generally, it is added, but it depends on the overall temperature, time and so on may also be reduced, the actual situation can be more, where are you in the factory, do you still need people in this area? You can get in touch.

It is to add temperature. That's what I used to do, and I did it for two years.

Add temperature I'm specialized in this, but pay attention to the uniformity of the temperature!

Do you need such talents? I specialize in refrigerator liner blistering. More than 10 years of work experience.