How to make the computer shareable, how to set the computer to share

1: The first machine is the main machine, which means that only when the host is on, the others can access the Internet.

This is done by using only one switch method: the crystal head is connected to the switch WAN head.

For the rest, just connect the outgoing line to each host.

Requirements: To set the host to a fixed IP is to set a (x is any number from 1 to 255).

Other machines can set the IP to automatically find This method must work, and I use this.

2: Of course, if you have a router, you should use the following method.

Connect your ** cable to the cat, connect the other end of the cat network cable to the WAN port of the router, and then make a few network cables to connect the network card of the machine to the LAN port of the router. Then, look at the manual of the router, mainly to know what the default connection address of the router is, generally. On a particular machine, the network card is set to, for example, the IP address mask gateway DNS.

Then, turn on IE for this machine and type:

http: You can open the control interface of the router, select the Internet mode, such as ADSL, that is, select PPPoE, and enter your ADSL account and password. ok！

Note that you should not install PPPoe dialing software in your machine, dialing is done automatically by the router, and do not establish other connections, only keep the local connection of the network card. Other machines have similar setups, such as:

IP address mask gateway DNS.

As long as the IP addresses are not duplicated.

If the connection address of the router is something else, such as:

Then the IP address of the machine is set to the gateway is, and the others are the same as before. ok

A network cable, and then set up in the Internet neighborhood, after the two computers are connected together, the router will assign an IP to each computer, and enter the IP of the other computer in the address block, if it is connected, then the resources on the computer can be shared.

It's hard to explain clearly, so it's better to find some tutorials to watch.

Isn't it enough to search from the inside?

1. The computer that sets up a shared folder or shared disk is called a computer; Access to a shared folder or shared disk, which we call a B-computer.

2. A computer needs to set a login and boot password.

1. A computer setup steps:

Take Windows 10 as an example, for example, if we need to share the F disk, first open the computer, right-click on the F disk of the computer, and select Properties.

Let's switch to the "Sharing" tab and select the "Advanced Sharing" button below Advanced Sharing.

Tick "Share this folder", "Limit the number of users to share at the same time" to set the number of users we need to share at the same time, if we have 10 computers in the LAN and want to access them at the same time, we fill in 10, we click the "Permissions" button.

After clicking on the "Permissions" button, go to the permissions of the f disk, and we will tick all the full control and change and read both.

The shared disk of computer A is successful, so how can computer B access the shared disk of computer A, let's take a look at the specific steps!

2. B computer setup steps:

First of all, we are in the B computer, open the win10 on the desktop "This computer", pull down the scroll wheel on the left sidebar, find and click on the network, if it prompts "Network discovery has been turned off. You can't see the network computers and settings. Click to change. Let's click on it and then click on "Enable Network Discovery and File Sharing".

Select Yes, enable network discovery and file sharing for all public networks

We click to enter computer A, enter the system login account name and password of computer A, and you can see the F disk that has just been set to share, and double-click to open the content of the F disk in computer A.

If you need to access a shared folder or shared disk set up by computer A, such as computer C, computer D, or computer E, the method is the same as that of computer B.

In the folder right-click Properties option, there is a sharing setting, select Share, and then add everyone user.

Computer Technician: Teach you how to set up file sharing on your computer? Just set it up!

1. First of all, click the wireless network icon in the lower right corner of the computer, "Open Network and Sharing Center".

2. On the screen that opens, select "Change adapter settings".

3. Select the network card that has been connected to the network, that is, the network card that can already access the Internet, right-click - > properties, and open the interface shown.

4. Select "Share" in the "Wireless Network Connection Properties" dialog box, and then check "Allow other network users to connect through this computer's Internet connection", then the wireless network connection has appeared with a shared logo.

5. Set the IP address of the wired NIC, select NIC->right-click>Properties->"Internet Protocol version 4"- > attribute, enter the IP address, as shown in the figure below, DNS is better to enter a DNS address of the local network, otherwise the web page cannot be opened, which is commonly known as DNS resolution error.

6. Set the address of another desktop or laptop wired network card, open the setting interface step as above, setting the IP address is the key step, to set the IP address of the shared network card as the gateway of the IP address of another computer or notebook, the IP address needs to be in the same network segment, and any other IP address can be set.

7. Finally, the two computers are connected by network cables, and the other computer can also access the Internet, which realizes the network sharing of dual network cards.

Hello! You need to use a router to connect these computers to a local area network, and then the folder that needs to be shared is set up as a shared folder to be shared to

Quite simply, the public LAN is used, and all use the same system. You create a shared folder and you're ready to share it.

Right-click on "My Computer".

To share your own computer with someone else's computer, you must have two computers on the same LAN and the two computers can ping each other.

LAN Sharing Setup Steps:

1. Both computers are connected to the same router.

2. Right-click on the desktop network --- properties --- change the advanced sharing settings.

3. Select Public Network --- select the following options: Enable Network Discovery--- Start File and Printer Sharing--- Enable Sharing So that users who can access the network can read and write files in public folders (can not be selected) - Turn off password protection sharing (other options use the default).

4. Save and confirm.

5. Select the folder or drive letter that needs to be shared, and right-click - Properties.

6. Open the Share tab --- select Share --- pop-up dialog box --- add "guest" -- sharing.

7. Select Advanced Share --Select Share this file --OK.

8. Double-click on another computer to open the network, and the folder or drive letter you just shared will appear.

Note: To prevent accidental errors, turn off the firewalls on both computers.

In the corresponding folder, i.e. the desktop folder, right-click and click Properties. Select Sharing, and then click Advanced Sharing. Just tick Share this folder.

Select the folder that needs to be shared on the desktop, right-click, select "Properties", select "Share" in the properties, and click "Share" under the folder to enter, type "everyone" in the Add User Bar, click Enter, click "Share" When prompted to share, you only need to wait for the system to complete, and after success, "Folder has been shared" will be displayed, and other computers with permissions can log in and access.

File sharing refers to actively sharing one's own computer files on a network. It is generally used for the internal use of enterprises. Most of the people who participate in file sharing also share files provided by other users.