I don t know what s going on with my fixed line, the noise is so loud?

Hello, there is a noise in the fixed ** as follows:

1. Cause of failure: It may be caused by problems such as user lines, switches or phones.

2. Processing steps, first determine what the access method is fixed:

1) If it is FTTB access mode:

1) It is recommended to check whether the network cable is connected.

2) It is recommended to restart the FTTB device.

1) It is recommended to check whether the ** line contact is good.

2) Check whether the ** machine is normal.

3) If there is ADSL, check whether the separator is connected.

You can also report the fault through the operator's customer service, and a staff member will come to the door to detect the fault after the fault is reported.

Fixed ** loud noise, which may be caused by problems such as user lines, switches, or **phones. 1. Judge what access method it belongs to, 2. It is recommended to detect whether the ** line contact is good, 3 It is recommended to check whether the ** machine is normal 4 If there is ADSL installed, check whether the separator is connected, 5 It is recommended to check whether the network cable is connected well, 6 It is recommended to restart the FTTB device, learn more about the service offers, click on the "****" customer service 218 below to answer for you.

2. If there is ADSL, it must be connected to the separator. The extension cannot be connected in front of the separator. The line port of the splitter is connected to the incoming wire.

The modem port is connected to the modem device, and the phone port is connected to **. 3. If you ensure that all the lines are in good contact, there is no abnormality in the wiring, and there is no fault in the machine, please call 10000 to report the fault. Thank you for your interest in telecom products and wish you a happy life.

If the above information does not solve your problem, you can also log in to Guangdong Telecom mobile phone**(

If it is a household **, it is a good line contact.

Is the phone making too loud noise? Turn on this switch, the sound is immediately clear, and I am not afraid that I will not be able to hear clearly.

There may be something distracting.

**There are generally the following possibilities for noise, you can first troubleshoot by following the steps below:

1. First of all, check whether the contact of the user's ** line is good, check whether the telephone line connection is damaged, or whether the connection of the connection line is not in good contact.

2. If there is ADSL, the separator must be connected, and the extension cannot be connected before the separator. Check whether the separator is connected correctly, the line port is connected to the incoming line, the modem port is connected to the modem device, and the phone port is connected**.

3. Change to another phone and try again.

If there is noise in the fixed line, you can check whether the line is in contact with the virtual place, and if the line is fine, it is the problem of the microphone.

You don't have a voice separator, the separator is a small box that separates the voice signal and the number of signals in the state socks, the sail is good, the reed line comes in, the advanced separator is advanced, and then one is connected to the ** machine, one is connected to the broadband cat, and the market is about 10 yuan Will it be that the separator is broken, it is best to borrow one and try it first.

In general, there are two reasons for the noise of the ** machine:

Line faults (including program-controlled switches) should be contacted, identified and repaired with the local telecommunications bureau;

**The machine itself is malfunctioning. You can change a ** machine to identify. For the faulty machine, there is basically no value of maintenance, after all, the current machine is already very cheap.

**Consultant Chen Weiyi I wish you a happy life!