Is there an air conditioner that can be entered with 380 or 22O?

No. Here's why:

1.Whether the air conditioner power supply is 220V or 380V depends on the compressor.

2.The motor structure of the compressor is fixed and the voltage used is determined at the factory.

Expansion: How to drive a 380V motor with a 220V power supply To drive a 380V motor with a 220V power supply, you can use the following methods.

1) Inverters can be used. Now there are inverters with input 220V and output three-phase 220V, you just need to pay attention if the motor is star wiring, it must be changed to triangle wiring.

There is also a kind of inverter that is input 220V and output 380V, which does not need to consider the motor wiring method.

2) Now there are 220V to 380V power boost converters, but this ** is a bit expensive.

3) It is to increase the capacitor on the motor and connect it according to the wiring method in the figure below. In the triangulation method in Figure 1, if the motor is not in the direction you want, you can change the wiring method in Figure 2. The same is true for star connections.

The above three methods are my advice to you. The first two methods are worth referencing, the third method is easy to burn the motor, no matter how to change, it is a three-phase motor after all, and its purpose and scope of use are determined when designed, and we can only transform it when there is no way.

It is not possible to achieve just one.

The first thing I'm going to tell you is that the air conditioner can hit about 20 square meters! (5 square more is OK, but the effect varies greatly) Your 11 plus 8 equals 19 Theoretically, it is in range! But yours belongs to indirect refrigeration (not a 2-in-1 19 square refrigeration method), so I want to tell you, the effect is definitely reduced!

But with your approach, the air conditioner will be on longer, and the small room should feel okay, at least it won't be hot!

It is generally not recommended to share an air conditioner in two rooms, and if you want to install it like this, you can do the following:

1. The air conditioner is installed in one of the rooms, and two changing fans are installed on the partition wall in the two rooms, one is blowing in the forward direction and the other is blowing in the opposite direction, so as to realize the air exchange and air exchange in the two rooms;

2. Install air ducts for the air outlet of the air conditioner, and introduce the air outlet into the two rooms respectively;

3. Install a large shutter-like open window on the partition wall between the two rooms to connect the temperature field of the two rooms;

4. Remove or partially remove the partition walls between rooms;

No matter which method is adopted, as long as the air conditioning in the two rooms is shared, the privacy of the two rooms is also reduced, and whether the number of air conditioners matches the sum of the area of the two rooms also directly affects the final effect of the air conditioner.

OK. It is equivalent to ** air conditioning, but it is not so cold, just right, in fact, it is not good for the body to be too cold at home. I often turn on the three air conditioners in the whole suite, but the door is not closed, and the air is super good!

The 2 rooms are not big, a hanging air conditioner is enough, you can divide the wall in the middle at a certain distance (depending on the air conditioner, the empty space can be decorated by yourself), as long as it does not damage the beams and columns.

It works, but letting the room cool down slowly leads to more power consumption.

It is recommended that you make a small section of air duct and draw a certain percentage of cold air directly into the small room at the air outlet of the air conditioner.

1 machine and 2 rooms are OK, but the exhaust fan may not be easy to use. Put a floor electric fan at the door of the big room and blow it to the small room.

Yes, but a house without air conditioning has poor cooling effect.

With water cooling, one room at a time, although it is slow, but it is also very energy-saving.

Is it OK to install one air conditioner in two rooms? Will the refrigeration be good? Let's explain.

No, it's a waste of electricity, and it's useless, which means that you don't install it, and you exhaust the hot air and the air conditioner, which means that you don't install the air conditioner.

You'd better install that air conditioner in the big room if it can ventilate the small room.

Yes, that's it in my house, it's just that the other room doesn't work so well.

Yes, but the effect is not as good as that of a room.

I think it's possible, but I'm not an air conditioner.

Privacy and cooling capabilities are fine. Open 2 holes, the top of the air through the air-conditioned room, the bottom from the air-conditioned room to blow the air. It's best to design a cover that automatically closes when the wind isn't blowing.

The hole below can be installed with a PVC pipe about 110 large, and an elbow can be added to lengthen it to close to the ground of the air-conditioned room. The fan is probably the same as the computer case.

Supplement: This kind of air conditioner is often done in the past few years, one to two, one to three, according to the number of internal units and cooling capacity, the corresponding matching and control of external units. This kind of machine is suitable for customers who do not have the installation conditions of an external machine.

However, due to the actual installation and use of the cost machine, if there is a problem with one part, basically the whole family cannot use it. Moreover, considering the space problem, the position of some internal units of the air conditioner has caused an extra-long copper pipe, which is also unfavorable to the compressor.

So now manufacturers will no longer produce such household air conditioners.

However, there are still such models on the commercial air conditioner side. If you really need it, you can consult the local air conditioning equipment company to ask for the specific situation!

Yes, it can be in the form of one machine towing multiple machines, and one external machine towing multiple internal machines. Each internal unit can be controlled autonomously.

Go online to buy a mobile phone, universal remote control (headphone plug size, 2-5 yuan).

The next software is installed on the mobile phone, and all the remote controls in the home can be replaced.

I have a kitchen fan remote control at home, can I buy one?

Universal remote control, most air conditioners can be matched. A few bucks will be done.

There's a universal one, 10 yuan to get it.

You need to buy a match, and the seller understands.

Whether it can be brought depends on how big the line is, how many square lines, and each air conditioner should be connected to a switch separately.

I can bring it to the touch.

The power of the air conditioner is about 1000W, the computer is about 400W, and the TV is about 300W. Total power of all electrical appliances = 1000 + 1000 + 400 + 300 + 300 = 3000W

The ampacity of the two-phase wiring of a 4 square copper cable is 30A. The power that can withstand = 30 * 220 = 6600w, so there is no problem with normal use.

The maximum allowable current carrying capacity of 4 square copper core wire is about 35-40a, that is, 7-8kw load. According to the description, the electrical load is basically about 7-8kw (6 kilowatts for 2 air conditioners, 300 watts for computers, and 200 watts for 2 TVs), and 4 square copper core wires are barely OK.

The specifications of copper core wire are 1 square, square, square, 4 square, 6 square, 10 square, 16 square, 25 square, 35 square, 50 square, 70 square, 95 square, 120 square, 150 square, 185 square and so on.

This "square" is a colloquial term that represents the cross-sectional area of the copper core of the wire and cable, measured in millimeters squared (mm). Although the cross-sectional area is related to the current carrying capacity of the copper wire, it is not directly proportional. The ampacities of two 1 square copper wires are equivalent to the current carrying capacity of one 4 square copper wires.

No problem.

2 plastic wires are threaded through plastic pipes, and the rated current carrying capacity is 31a

Air conditioning heating, electric auxiliary heating two sets of 5kw

The high configuration of the computer is 400w is enough, and the TV is 100w

A total of about 4 squares, 25 degrees can be loaded.

And this is a conservative calculation.

So please feel free to use it.

Theoretically, it can be used, but for safety, it is best not to start or use it at the same time, it should be that there is nothing to do now, and the home improvement is generally a dark line and wants to change the line is more troublesome, so it can still be used, but it is best to use it separately and it is best to use less during the peak period, because the voltage is lower than usual during the peak period, and the current is higher.

There are many formulas for calculation, and the load of 4 square copper wires is about 20aMy house is 4 flat copper wires, three air conditioners turned on at the same time without any problems, check the power cord is not overheated.

According to the maximum flow rate of 8A per square copper wire, 32A, 60% = 18A for safe operation, two 1,5 hp plus computer and TV lighting about 4000W 220V about 20A.

Inadequate. 6-8 square meters should be selected.

1. The split machine is cheap but has a design life, seven to eight years, the air conditioner is expensive but the design life is twenty-five years, 2. The airflow distribution of the split machine is not as good as the air conditioner, and the indoor temperature is not as uniform as the air conditioner and the temperature control accuracy is high.

3. **Air conditioning now has far more energy efficiency than the national level, and it is only the electricity consumption of that room to open that room.

4. The split machine occupies a space, and the air conditioner does not occupy a place, which is beautiful and generous.

OK. However, it must be opened at the same time, and it is not possible to save electricity and energy.

Moreover, it has to be a master of modification: it needs to be equipped with an element such as an expansion valve.

Otherwise, the whole machine may be scrapped: like chicken ribs.

No, there used to be a production of one-to-two air conditioners, but now it has long been out of production, it is not energy-saving, and the effect is not good, and it is better to buy two cheap air conditioners than to one-to-two.

Yes, the previous one-to-two, just like that, add solenoid valves to the pipelines of the two indoor units, and then connect the line of the solenoid valve to the compressor in parallel with the original wire box, and connect a common power supply.

Yes, it needs to be greatly changed, and the cost of modification may be almost catching up with a smaller air conditioner.

If you want to modify, you can refer to the way of the ** air conditioner, or you can change it according to the structural form of the one-to-two air conditioner.

Yes, as long as the transformation is reasonable.

Not only the circuit needs to be transformed, but also the refrigeration system needs to be transformed, which non-professionals cannot do well.