A computer console with no display. Is there a way to make the phone do this host display?

It's not feasible to want to act as a monitor directly, but I have another way to achieve the same effect.

Find a way to borrow a monitor first, and then install a software on the computer, teamviewer, is a remote control software, register after installation, and log in, find "access the computer anywhere with a personal password" on the interface, set the password for remote connection, and then also **teamviewer app on the mobile phone, log in to the registered user, and then you can see this computer device, click to build a remote connection, This allows the phone to act as a monitor for the computer.

Of course, the prerequisite is that the computer has Internet access. In the future, the computer will not need a monitor, and when you want to use the computer, you can use your mobile phone to open TeamViewer and connect to the computer remotely.

There's a sunflower software that's just as upstairs said.

Because the mobile phone does not have a sound ** output interface, so the mobile phone can not be directly connected to the display, as for the ** is DVI to HDMI cable, for the computer graphics card does not have an HDMI interface can be used to connect the cable to the monitor or TV.

How to connect your phone to your monitor:

1. Ensure that the Android terminal system is above and the switch of the wireless display in the mobile phone settings is turned on. In the native Android phone, the switch for wireless display can be found under the "Settings Display" option; Terminals that have been customized by the manufacturer can find this switch in the menu of the shared connection class.

2. Next, switch the monitor to Miracast mode, then you can see the AOC display option in the automatic search list of the mobile phone, click it to connect. Once connected, you will be able to see the same picture on your monitor as you would on your phone.

Analysis: If the host indicates that the copy light is on or off, the screen is not powered on (the power indicator is not on) or the screen is powered on but there is no signal or "no sighal" is displayed, the former means that the power is not on or the connection is poor, and the latter is generally the memory module is not in good contact.

Recommendations:1If the monitor is powered on but no signal is displayed, turn off the power and turn on the case, plug in and unplug the memory module again, and wipe the gold finger with an eraser (the back of the thumb fingernail is also fine) in one direction, and then turn it on after installation.

If you don't know how to operate, then it's simple: kick the chassis with one kick (note the location: the front of the shell on the left and right sides of the chassis that has no interface at the back).

If it's a notebook, you can't kick it, but it's the same for other operations.

2.If the above operations do not work, turn off the power and turn on the chassis, reinsert the graphics card, and plug in the data cable between the monitor and the graphics card.

3.If the monitor is not powered on (the indicator light is not on), look at the back of the monitor, plug the power cord that connects to the monitor upwards, and check that the other end of the power cord is powered on to the outlet.

Here are a few steps:

1.Unplug the power cord of the monitor and plug it back in, see if there are words such as "no signal", if there is a statement that the monitor is good, exclude the monitor.

2.Reconnect the data cable between the monitor and the host, plug it in firmly, and then it will be a problem with the host3The memory of the graphics card is loose or not.

4.Send it for repair.

First rule out whether there is a problem with the display, no problem is that the hard disk cable is loose, this situation is that the hard disk does not boot up, the first two are excluded without a problem, then it is serious, it may be a problem with the memory, the system, or the hard disk is broken.

Tools Materials: Computers, monitors, monitor cables.

1. First of all, prepare two monitor cables and connect both monitors to the host of the computer! Of course, first of all, the motherboard should support connecting multiple monitors, but the current mainstream motherboards support it.

2. The two monitors may not be lit at the same time, but one of them will definitely be lit, and then right-click on the computer desktop to select the display settings.

3. After entering the display settings, click the detection on the right side, you can detect that there are two monitors, if it is not detected, then check whether the interface is not plugged in tightly.

4. Then scroll to the bottom of the page and find multiple displays.

5. Among the multiple displays, choose to extend them.

6. Then the two monitors are lit up, and you can use two monitors at the same time.

One computer is connected to two monitors to display and output different content.

Of course, I just use two monitors.

First of all, your computer needs to support two monitors.

Then install a converter head and you're good to go.

A converter can be bought for 5 dollars.

Yes, the highest technology nowadays is that two people can play different games on one console.

A host can use two monitors at the same time, but the display is the same picture, but the original display area is larger, your graphics card is a separate graphics card, and there are two display interfaces. One monitor is connected to DVI and the other is connected to HDMI, after you have connected both monitors, start your computer, and in the Windows Display Properties - Settings page, you will see that there are two monitors.

There is a mobile phone screen software, which can make the mobile phone screen display on the computer.

Two monitors, you want one to play games and one to watch movies,If they are all working at the same time,I haven't played this,You can use one monitor to connect to the VGA interface,The other is connected to HDMI (to ensure that the display also has an HDMI interface) to connect it。

Hello, your idea is achievable, the requirement is yes, the graphics card has a DVI or HDMI interface, if there is only VGA it cannot be connected!

Yes, as long as your graphics card has an HDMI port. It is recommended to turn the computer on after connecting in the shutdown state. Runtime plugging is not recommended.

It's okay, provided that your TV can be used as a monitor.

That's what it looks like.

Brick base 1Homemade potato milk**.

Once well stirred, pour in the flour and stir again. Wait until the flour and potato paste are completely blended and ready to use. Apply this homemade potato** evenly to spotted areas and use a cleanser for the next 20 minutes.

Follow with further moisturizing. It takes several courses of treatment to achieve the effect of freckle removal.

2.Aloe vera pearl powder**.

We all know that pearl powder is a sacred object for beauty. It has the effect of whitening and lightening spots, and can be taken both inside and outside. And when used with aloe vera, it can moisturize and lighten spots.

Let's talk about the practice of aloe vera pearl powder**.

How to make pearl powder aloe vera**:

Peel the appropriate amount of aloe vera, then put it in a container and mash it, then add the appropriate amount of flour, as well as pearl powder. Stir using a ** scoop. Wait until the materials are completely blended before they can be used.

Using only **spoon, apply this homemade** evenly to the spotted area and wait 30 minutes. Rinse with clean water. This is followed by a moisturizing session.

Use this** can be applied once a week. Persistent use can achieve the effect of freckle removal, and can also whiten and moisturize.

3.Banana freckle removal**.

The ingredients are bananas, pears and yogurt.

Depending on the size of the spots, the amount of material used is determined. Pour the prepared amount of banana pears and yogurt into a container, then mash it, and stir well with a **spoon before use. Apply the paste evenly to your face, wait for 15 minutes, then rinse off with water.

The use of this ** can play a good role in lightening spots, moisturizing and whitening.

4.White vinegar water freckle removal.

The method of making white vinegar water is very simple. Pour a teaspoon of white vinegar in a container, then pour 20 ml of water. After mixing the white vinegar and water thoroughly, you can use the white vinegar water to cleanse your face.

Once a day in the morning and evening, if you insist on using it, you can also whiten the skin, eliminate spots, make ** smooth and flawless, and help everyone improve ** problems.