The water purifier has been used for several years, and the filter element has not been replaced, bu

It is normal to be able to produce water without changing the filter element for several years, but the water that comes out has not been filtered or the filter element has lost its filtering function, and the water that comes out may be worse than the tap water that is not filtered, because the tap water has been polluted twice when it passes through the filter element, do you dare to drink the water that comes out like this? It's better to change the filter cartridge quickly.

I haven't changed the filter for several years during the semester, and I still run water, which can be flowed, but the outflow water is not well filtered, and it may be that the direct flow is tap water.

These cannot be filtered, and impurities and contaminants in the water cannot be filtered out.

Well, not changing the filter cartridge may not affect the flow rate of the water. It can only affect the quality of the water.

In this case, I suggest that you change the filter element, otherwise, the water purifier will not have its effect, and it will not have the effect of water purification.

This means that he needs to be replaced with a new one at the end of his service life.

If you use the water purifier, you have to change the filter after a few years, otherwise it will be very dirty inside. Then the drinking water becomes very unclean.

Won't the municipal tap water not change its pipes for decades affect the water quality?

It will be, but it will definitely not be serious, otherwise it would have been taken seriously a long time ago.

The filter element of its own water purifier is definitely much better than the pipe, thereforeAs long as the filter element is not dirty and does not affect the water use, it can be changed or not

1. The core component of the filter element is the filter element, and many people do not replace the filter element in time when the filter element adsorbs impurities to reach a saturated state, so the water output of the water purifier will be relatively small. 2. If the local water quality is too poor, then the filter element of the water purifier will be very unused, and it will not take long for the filter element to be blocked, and the water output will naturally be very small. 3. If the water purifier itself fails, if the water purifier is used for a long time, or the local water quality is very poor, then it will cause damage to the machine itself and will also affect the water output.

4. If the pressure pump is damaged, if you are using the RO machine, then after a long time of use, the effect of the pressure pump will be affected, and if the pressure is not enough, the water flow will definitely not be enough. 5. Affected by the temperature, if the local temperature is relatively low, the output of water purification is relatively low, and the water output in winter is always lower than that in summer, which is also the reason.

The water purifier may not be thoroughly cleaned by you.

So you change the filter and the water comes out smaller.

Take it out and clean it well. New ones always work well. The new one doesn't work, it's your own fault.

This problem is caused by a variety of factors, it depends on which level of filter you replace, if you change a full set of water outlet is still small, you have to check whether your water pressure is normal, and then the indoor temperature is too low will also affect the water output.

Summary. It may be that the pressure barrel does not store water and causes a small flow of water, just lay down the gas or change a new barrel, Bolebao's water purifier, the water purifier will prompt the replacement of the filter element time, and you can replace it manually, the filter element is an ultrafiltration membrane, the filtered water has a trace amount of mineral elements, and the main filter element of the water purifier is the RO reverse osmosis membrane, only water molecules can pass through the RO reverse osmosis membrane, any other substances will be filtered out, and the filtered water is only left with water molecules, which is the international standard of healthy water.

What is the reason why the water purifier still produces very little water after changing the filter element?

It may be that the pressure barrel does not store water and causes a small flow of water, just lay down the gas or change a new barrel, Bolebao's water purifier, the water purifier will prompt the replacement of the filter element time, and you can replace it manually, the filter element is an ultrafiltration membrane, the filtered water has a trace amount of mineral elements, and the main filter element of the water purifier is the RO reverse osmosis membrane, only water molecules can pass through the RO reverse osmosis membrane, any other substances will be filtered out, and the filtered water is only left with water molecules, which is the international standard of healthy water.

Can replacing the pressure drum solve the problem?

Dear, no problem<>

How to pump up? A small pump will do. Oh. Hmmm.

Is your water purifier blocked, so the flow will be small, because you used to change the filter element like this, and this time you replaced the filter element, there will be less water, so you can remove the linked pipes to check it.

The water purifier has been making water non-stop Reason:

1. Because it has a high-voltage switch, if there is a problem of failure, it will cause the water purifier to work all the time, and it will cause the wastewater to flow down continuously. You can close its ball valve first, if its pump body is still working, it means that the switch is out of order and needs to be replaced.

2. It is also possible that there is a problem with the solenoid valve, when it is in a full state of water, the pump body stops working, and the solenoid valve of the water inlet should be stopped, but if there is still wastewater flowing all the time, it means that the solenoid valve is out of order.

Extended information: Most of the water purifiers adopt the progressive structure of the principle of screen filtering, which is composed of multi-stage filter elements connected in series from end to end, and the precision of the filter elements is arranged in order from low to high, so as to realize the multi-stage filter element to share the trapped dirt, so as to reduce the blockage of the filter element and the number of manual sewage discharge, dismantling and washing, and extend the cycle of replacing the filter element.

There is also a new design idea is to apply the principle of separating the flow of quality self-cleaning structure mode, its design idea is no longer to provide as much space as possible for the storage of dirt and dirt, but to take the principle of separating the quality of a small part of clean water, and at the same time as far as possible to let the raw water flow as usual to make the dirt with the flow of water in time to be taken away, so that the flow of water does not rot.

In this way, the water is not only purified, but also will not or is not easy to precipitate dirt in the machine, avoid the formation of secondary pollution and greatly reduce the loss of the filter element, the water quality is better, safer, energy-saving and low-carbon.

Depending on the usage, one of the following conditions indicates that the filter is time to be replaced

1. The effluent flow is very small and cannot meet the normal needs (indicating that the filter element is blocked, and the filter element should be cleaned in order to restore the normal flow), and the flow rate is still very small after cleaning and cannot meet the needs;

2. The taste of the effluent decreases and the taste is close to that of tap water, that is, the chlorine taste of tap water cannot be removed, indicating that the activated carbon filter element has been adsorbed and saturated, and the activated carbon is invalid;

3. The softening function cannot be restored after the softening core is regenerated or the softening effect does not meet the requirements;

4. The service life of the filter element reaches two years.

I also encountered the same problem, after changing the filter element, I kept making water, and then the light flashed double, and the water purifier stopped working. The solution is that because the problem is caused by the replacement of the filter element, find the reason for the replacement of the filter element and reinstall the filter element, first cut off the water and power, tear off the label that affects the seal, and hammer it after installing the filter element to ensure that the seal is sealed and then buckle the number and buckle, and the result is good.

Summary. Hello dear. This could be because the filter has been used for too long and has lost its filtration effect, or it may be that other parts of the water purifier have malfunctioned or broken, resulting in the raw water not being effectively purified.

It is recommended to replace the water purifier filter element regularly and check whether other parts of the water purifier are working properly.

Hello dear. This may be due to the loss of filtration effect due to the long use time of the filter element, or it may be that other parts of the water purifier are faulty or damaged, resulting in the raw water not being effectively purified. It is recommended to replace the water purifier filter element regularly and check whether other parts of the water purifier are working properly.

I have only changed the filter element for four days, and when the water quality was changed only 35 points, the water quality has reached 186 points, which is the same point value as the raw water, what is the problem?

The filter you replaced may be out of date or at full capacity and can no longer effectively filter water. It is recommended to replace the filter with a new filter or use a higher grade filter to improve the filtration effect. In addition, it is also necessary to pay attention to cleaning the filter element and filtering the slag of the hall in time to maintain the normal operation of the water treatment equipment.

The filter element I changed is brand new and very good, the pre-stage is a micron Senbang ceramic filter element, the rear stage is a 100-grade RO membrane imported from the United States, and the activated carbon is very good after the middle two resistances, why the water quality is very good when it is just changed, only 35 points, and the next day it is a little higher to Songyuan today and the four days become the same as the filtration.

Why don't you talk back?

This may be due to the fact that in the process of using Senfeng filter, various impurities such as sediment, dead microorganisms, and scale will gradually accumulate on the filter element, resulting in a decrease in the filtration effect of the filter element, which will make the water quality worse. In addition, if the water source used contains high water quality parameters, such as hardness, TDS, etc., the life of the filter element may be shorter, and the filter element needs to be replaced more frequently to ensure the stability of water quality. It is recommended that you regularly check the condition of the filter cartridge and replace it in time to ensure the quality of the water.