2 live wires How to wire 2 neutral wires?

The two wires of fire cannot be separated, and then connected to the L-hole.

The two zero lines should also not be separated, and can be connected to the n hole.

You only need to connect the L-N marked by the arrow in the picture to the L-N hole of the socket you newly bought, and the two L-N are generally separated for other sockets.

Connect 2 live wires to socket live wire L, and 2 neutral wires to socket neutral wire N

This wire is strung from other locations, and it has to be strung to other sockets, so the two live wires and the two zero wires are actually together, you can see that a live wire is just cut and connected to the socket, then you have to connect him back together, otherwise there will be no electricity in the back, so you understand it?

Under normal circumstances, if there are two live wires and two neutral wires inside the socket, we need to connect the two live wires together, and the two neutral wires are connected together, respectively connected to the number of live wires and neutral wires of the current ** socket, so that we can achieve a good connection effect. The two copper pieces are linked, so the live wire and the neutral wire are connected by an external jumper, and now the wires inside the socket have been connected together, and there is only one connector, so you only need to connect the live wire of the incoming call to the socket in the live wire, and the zero wire is connected to the neutral line and if. The extra zero line and fire line are useless and can be subtracted.

The live wire is connected to L together, and the neutral line is connected to N together

If it is two wires with afterburns, and it is a one-zero fire, it can only be connected to a switch control socket, as shown in the figure below

If the two wires were originally used to switch the control lamp, changed to a switch with a socket, then if you want to switch to continue to control the lamp, the socket often has electricity, there is still one less zero wire, you must pull another zero wire nearby, in order to use the socket, otherwise the socket is unusable.

Therefore, it is recommended that the landlord describe the problem in detail and completely, so that everyone Duan Xiao can better help you solve the problem.

Dear, I am glad to answer for you: how to connect two wires with ground wire live wire zero wire If it is a single-phase two-hole socket, the right hole or upper hole of the socket is connected with the phase wire, and the left hole is connected with the neutral wire; If it is a single-phase three-pin socket, the right hole is connected with the phase wire, and the left hole is connected with the neutral wire. If the ground fire zero third wire is connected to the second wire, then you can go to the ground wire, and the fire wire zero line can be connected to the electrical appliances.

The neutral line is the line drawn from the neutral point (n) on the secondary side of the generator or transformer, and forms a loop with the phase line (l) to supply power to the electrical equipment. Under normal circumstances, the neutral line is repeatedly grounded (PEN) with the protective ground wire (PE) at the neutral point (N) on the secondary side of the transformer, which plays a double protection role.

Summary. "Parallel connection. On a live wire, two wires are connected to one end of the two switches, the other end of the two switches is connected to one end of the two lamp heads, and the other end of the two lamp heads is connected to the neutral line. ”

How to connect two switches and two lights to a live wire and a neutral wire?

"Parallel connection. On a live wire, two wires are connected to one end of the two switches, the other end of the two switches is connected to one end of the two lamp heads, and the other end of the two lamp heads is connected to the neutral line. ”

The fire line answered and understood, how to divide the main zero line.

1.You can check with an electric pen when the power is on, and the one that will light up is the live wire. 2.

Disconnect the neutral line of the main switch, only turn on the live wire, turn on the indoor light where it is on, and measure it with an electric pen. It didn't light up before, but now it's the zero line, and the rest is the ground wire. 3.

After measuring the live wire with an electric pen, connect the two bare wires and the live wire to the 220V bulb respectively, so that the neutral wire and the ground wire can be distinguished from the brightness. The bright one is the zero line, and the dark one is the ground line.

I still don't understand how the 1 zero line is divided into two lights, from that point. 2. The switch only controls the incoming and incoming lights of the live wire. 3 is mainly the zero line from that part to the two lights, beginners will not be able to learn the professional language, please ask the teacher to draw a picture.

Two switches, the upper two terminals, in parallel to connect the live wire, the lower two terminals tap two neutral wires, and the two neutral wires tap two lights, you can control the two lights.

Can the engineer draw a diagram?

Two switches, the upper two terminals, in parallel to connect the live wire, the lower two terminals tap two neutral wires, and the two neutral wires tap two lights, you can control the two lights.

I was too impatient, and I didn't understand the answer several times.

1.You can check with an electric pen when the power is on, and the one that will light up is the live wire. 2.

Disconnect the neutral line of the main switch, only turn on the live wire, turn on the indoor light where it is on, and measure it with an electric pen. It didn't light up before, but now it's the zero line, and the rest is the ground wire. 3.

After measuring the live wire with an electric pen, connect the two bare wires and the live wire to the 220V bulb respectively, so that the neutral wire and the ground wire can be distinguished from the brightness. The bright one is the zero line, and the dark one is the ground line.

There is no new content for the bot.

Hello, kiss, we're all manual here.

Summary. How to connect two live wires and two neutral wires?

How to pick up? Dear, look at what I said above.

After one of the groups was connected, the light socket in the room was out of power and did not light up.

It should be that it has been in contact with it, causing leakage.

It shouldn't have been like this before.

So what to do? Only one by one can be checked.

How to check? Take it apart and look at it one by one.

It must be the live wire of two circuits, one is the live wire of the socket circuit, the other is the live wire of the lighting circuit, the zero wire is the zero wire of the socket circuit, the neutral wire is connected to the socket N hole, the live wire of the lamp is connected to the switch, and the other live wire is connected to the socket L hole.

Follow the ** wiring below.

Summary. Hello, what device are you referring to? You'll have to explain what the device is and I'll be able to tell you how to wire it.

2 live wires How to wire 2 neutral wires?

Hello, what device are you referring to? You'll have to explain what the device is and I'll be able to tell you how to wire it.

Plug-in boards at home.

There is no power when it is connected. You take a picture of me, the plug-in board can't have two neutral wires and two live wires.

You see, it's connected and there's no power.

There is no ground wire in your wall wire, that is to say, the socket's L connection fire this wax wire N connection zero line touch, why the wall is noisy and slippery up and down, you must know the function of these lines, according to the color should be the red live wire and yellow zero line.

I plugged it and there was no power.

That is, there is a problem with the wall power cord, do you know what each wire does?