WinRAR has stopped working in VISTA system, how to fix it?

Let's take a look at how WinRAR works

Most of what we do with computers is to work on files. Each file will occupy a certain amount of disk space, and we hope that some files, especially those that are not used temporarily but are more important and cannot be deleted (such as backup files, are a bit like chicken ribs), take up as little disk space as possible. However, many files are stored in a loose format, which wastes some valuable computer storage resources.

At this time, we can solve this problem with the help of compression tools, by compressing the original file to save it with less disk space, and then decompress it when it needs to be used, which greatly saves disk space. When you want to copy many small files, compression can improve the execution efficiency. If there are a lot of small files, it takes a lot of time for the operating system to perform frequent file location operations.

If you compress these small files first, turn them into a compressed file, and then copy them again. Since the information processed by the computer is represented in the form of binary numbers, the compression software is to mark the same string in the binary information with special characters to achieve the purpose of compression. To help you understand file compression, imagine a picture of blue skies and white clouds in your mind.

For thousands of monotonous and repetitive blue dots, it is not possible to define "blue, blue, blue...... one by oneA long string of colors is not as simple as telling the computer: "Store 1117 blue dots from this location", and it can also greatly save storage space. This is an example of very simple image compression.

In fact, all computer files are stored in the form of "1" and "0" in the final analysis, and like blue dots, as long as the volume of the file can be greatly compressed through reasonable mathematical formulas, to achieve the effect of "lossless and dense data". In general, compression can be divided into two types: lossy and lossless. If you lose individual pieces of data that won't have much of an impact, it's a good idea to ignore them, and that's lossy compression.

Lossy compression is widely used in animation, sound, and image files, and the typical examples are the video file format MPEG, the file format, and the image file format JPG. But more often than not, compressed data must be accurate, so lossless compression formats have been designed, such as common zip, rar, etc. Compression software is naturally a tool that uses the principle of compression to compress data, and the resulting file is called an archive, which is only a fraction of the original size or even less.

Of course, the archive is already another file format, and if you want to use the data in it, you first have to use compression software to restore the data, a process called decompression. Common compression software is WinZip, Winrar, etc.

Then you uninstall the live package first to see if the problem is solved, if it doesn't work, then run the program with the system administrator (right-click to run the program as administrator), and then try the compatibility mode (right-click Properties Compatibility WinXP SP2) This should solve the problem.

Exactly the same as what I encountered.

I'm having the same issue, I'm having problems after loading and unloading the Windows Live package.

Winrar has stopped working"This problem is usually caused by an abnormal WinRAR software or a corrupted system file, and here are some possible solutions:

Restart your computer and reopen the WinRar software.

Uninstall and reinstall the WinRAR software.

Check if your computer's system files are corrupted, run the system file check and repair tool.

Make sure your computer has the latest drivers installed.

If none of the above methods work, you may need to check the system for viruses or malware, and run antivirus or security software to scan and remove them.

If the problem cannot be solved after trying the above methods, it is recommended to contact the official support of WinRAR soft disturbance upgrade or consult the technical staff of the computing vertical machine for help.

1. Reopen the program or reopen it after restarting.

2. Turn off Data Execution Protection (DEP) for error programs

3. Turn off the anti-virus software or set the program to trust.

4. Change the installation path of the program and reinstall it once, if it was originally installed on the C drive, you can reinstall it on the D disk or E disk5, uninstall the recently installed other programs and then reopen the program6, clean up the disk and then open the program.

7. If the program still can't be opened and this program is important to you, then reinstall the system and then reinstall it.

What software did you install before this situation or do an optimization to clean up, did you install the unlocker this deletion software,This is a conflict (personal experience),In addition, some say that the thesaurus updater of Sogou input method will also conflict。

Uninstall Winrar and reinstall it or use the 360 compression tool for now!

1. Reopen the program or reopen it after restarting.

2. Turn off Data Execution Protection (DEP) for error programs

3. Close the anti-virus software.

or Lingshudder to set the program to trust.

4. Change the installation path of the program and reinstall it again, if it was originally installed on the C drive.

It can be reinstalled on the D or E drive.

5. Reopen the program after unloading the hole and loading other newly installed programs recently.

6. Clean up the disk and then open the program.

7. If the program still can't be opened and the program is important to you, then reinstall the system.

and then reinstall it.

How have you been doing it lately? Try uninstalling all the software, patches, and stupid drivers before the accident, and take a look at the following methods. If the fault is still there, it is recommended to check and kill the Trojan first, repair the system and try (you think about the recent operation, the failure will not happen for no reason, sometimes it may be ** a program is bad or a game is wrong will also be like this, this problem is more complicated, you need to figure out the root cause of the failure, you have to think about it, if you have a problem, please ask me).

1. Please use the system's built-in system restore to restore to the time when you do not have this failure (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system).

2. If the fault is still leaking, use the system disk to repair, open the command prompt and enter sfc scannow enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare and repair.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

Look at your **, it's caused by a module error. (This file is the ATI graphics card driver file).

If it still can't be solved, you can try to sell Dayun to reinstall dx