Desktop SD133 memory module issue

1. Theoretically, one-sided is slightly better, but the difference with double-sided is probably only something that Bill Gates can understand.

2. PIII Tulatin must be supported by 815EPT motherboard, and the "T" behind this model means that Tulatin is supported, and 815EP does not support Tulatin.

In addition, the 815 motherboard can only support up to 512M memory, not as you think, at this point, the BX motherboard is stronger than the 815 motherboard: the BX motherboard supports up to 768M memory.

Single-sided and double-sided are the same.

815 motherboard, if you only surf the Internet, you can use it without installing a larger antivirus software 256m, if you install antivirus software, we recommend eset nod32, which takes up less memory.

It's too old. 1.Single-sided, double-sided, no problem for your motherboard, it should be 815EP.

Single-sided double-faced 440bx kind of thing has some impact.

2.How much SDR memory do you mainly buy? If you support it, but you can't buy it, there's no way to do it.

The maximum is up to 512m, no matter how big it is, it's a waste, I have Taitu Latin at home, Dingxing 815, 512m is only a little stronger than 256m,

It's SD's memory!

There are no specific generations, but there are two frequencies, 100 and 133!

100 and 133 are theoretically compatible.

SD and DDR are two completely different types of memory! SD is one type of DDR, and there are two kinds of DDRs: one DDR1 and one DDR2

1. The maximum capacity and memory specifications of all supported memory

Only if you have a good understanding of your computer motherboard, you will choose the product

Looking at the fault you described, your original memory was DDR2 667 and your new purchase is DDR2 800

1: The most taboo for upgrading memory is that the new and old models and specifications are mixed, and compatibility problems are likely to occur!

2: File loss and memory overflow caused by the mixing of old memory DDR2 667 and new memory DDR2 800!

Solution. 1: If it is a physical store in the same city, the memory seller, please move the computer main chassis over, and ask the seller to test the machine on the spot to help solve it.

2: If you buy it online, the premise is that your desire to upgrade memory is very high, and then buy another memory of the same model, two new DDR2 800 memory combinations, and use dual channels together!

The best way to do this is to eliminate your current memory and add two more 2G DDR2 sticks. Just choose Kingston. Used a lot.

Compatibility is also good. But don't buy a fake one. Of course, if the memory slot is enough, you can also go to 1 2G.

In fact, dual-channel is the same thing, and the performance improvement is not very obvious.

2 x 2G dual channels are better.

You can go to JD.com**Buy two 2G DDR2 800 JD.com**,Kingston,ADATA is available。

**There are more fakes in Kingston, go to the crown store to buy ADATA.

Kingston can, 2 x 2g.

Can be used at the same time.

Whether it can form a dual channel depends on whether the motherboard chipset supports it.

Support dual-channel, 4 memory sockets, either 1,3, or 2,4

It's a dual channel.

It can be used on the same computer (there are some cases where there will be conflicts due to motherboard problems), as long as it is plugged into the socket of the same color, it can form a dual channel.

There is no problem with this motherboard.

It is best to combine two identical memory modules to become dual-channel according to the motherboard's instructions.

It can be inserted into a slot of the same color, or in a slot of a different color.

There is a card slot, generally put the memory gap to the long end of the edge first, press, force, hear a "click" sound, and the automatic lock on both sides is OK.

I'm very responsible to tell you, at least not yet.

Without such an adapter card, without a generation, the memory manufacturer makes no money.

It can be used, but the effect is not too good, because although the content capacity is 64M, the speed of the memory is reduced from 133 to 100

How to choose a computer memory module? Knowledge of assembling computers 20

As far as I can judge, your memory is DDR.

The 512 will sell for about 150.

Just buy one and plug it in.

Remember it's DDR

It's not DDR2

It's not DDR3 either.

Don't buy the wrong one, just believe it

I hope my answer will be helpful to you.

I hope you will adopt. Thank you

1G RAM definitely card Replace it with 4G or add 2GB RAM It is recommended that you buy Kingston's RAM.

The 2nd generation slot can only be inserted into the 2nd generation of memory sticks, adding memory sticks must be considered to be consistent with your original memory module frequency, otherwise I am afraid that it will be incompatible, if it is an XP system, 4G memory can only display 3G out, Vista or Win7 can display 4G

Just buy another 2G DDR2 800 memory and install it.

In fact, there is not much difference between 512M and 1G, the bottleneck is not here, but Win7 is only equipped with 2G memory is really low. Add at least another 2g, 140 yuan. Do you want to change the graphics card or not, or hd6770 more than 350 yuan.

Hope it solves your problem.

This kind of integrated display platform machine took the opportunity to change, and the total value of CPU motherboard memory is up to 100 pieces. It's really not worth adding money on this kind of platform, and the subsystem of the machine with a memory module should run more smoothly, but what can you do with such a low configuration? Is it just chatting on the Internet?

CPU change G1830 around 190.

The motherboard is replaced with a B85 400 or so, the memory DDR3 1600 4G is added, and the others are used old.

Some netizens asked about Gome".

Open the chassis first, see the motherboard, generally there are 3-4 tightly arranged slots on one side of the motherboard, this is where to put the memory module, the specific method is to check the lower end of the memory module into the slot from the outside at a 45-degree angle, and then push the upper end to the level on the line, if it is reversed, it can not be inserted, and then the boot should be started by pressing the "del" key to enter the refresh time, and the configuration of the column, it will automatically restart, enter the system. (Answer: small photo).

Answer, support me.

This is very simple, and there is a press port on the left and right of the memory. Just pull that mouth up and put it in the memory.

Disassemble the chassis after power failure, there is a slot near the original memory module, plug it in, and then turn it on.