Why can t my computer get into the system so often?

The weather is hot, and the heat dissipation of the motherboard is not done well, I have encountered it before, and then the motherboard simply burned. Depending on the way you look, it will be normal to let the machine cool down for a while, move it around, and there will definitely be a cooling time in between. You can move somewhere else, like the technical department, and let the machine run for a day or two and see how it goes.

Hope it works for you. Again, computer heat dissipation is very important in the summer!

First of all, I asked you if you used it for a long time, and you couldn't get up when you started it again, and then it started after 10-20 minutes. If yes, then I suggest you change the CPU fan, I guessed correctly, you should use Intel's 775 pin angle CPU (should be the left and right CPU), because the Intel775 CPU is prone to such problems, the weather is hot in summer, if the CPU fan heat dissipation is not good, it will cause the machine to not be able to get back up, if you are unlucky, it may burn the CPU and motherboard, so it is recommended that you quickly change the CPU fan to play with the computer.

The voltage is unstable or there is a problem with the power supply.

Replace the power supply of the host or add the stabilized power supply.

If there is a problem in your house, if it is okay in your classmates, it is a problem with the power supply

It should be a compatibility issue with the hardware.

Try changing the memory or hard drive!! It should work!

Replace the motherboard battery.

It's kind of like my computer, and it's not very compatible.

Sometimes you have to disassemble the line and reconnect it again, and you can enter it from the front.

Double-check the electrical circuit at home I suspect it's a short circuit.

I guess it's the fan's problem.

I guess it's a problem with the voltage.

It is recommended to reinstall the system. It is recommended to reinstall the system.

2.Then restart the computer and press F12 with your finger non-stop. After the boot option appears, select USB flash drive to boot.

3.Then you will reach the boot system. The name of each envy software is different, but the function is the same, click to enter the PE system.

4.Go to the PE system, click on the bootstrap tool on the left, and then the hail will pop up the bootstrap page. Press 1 to automatically repair.

5.If it still doesn't work after repairing, the only way to do it is to reinstall the Sun Photography system. This is usually caused by an incomplete image.

6.Then plug in the USB flash drive and restart the computer. Press F12 without interruption and select the USB flash drive to start when the boot options appear. On the startup screen, click to enter the PE system. Once entered, the tool will automatically open. After selecting the image file, click below to confirm that it will be installed automatically.

7.After the installation is completed, it will automatically restart, and at this time, unplugging the USB flash drive computer will automatically install the plug-in. Wait patiently for the installation to complete.