Where is the location, I want to apply a film to the car

The film should not only choose regular products, but also pay attention to the construction process of the car film. Because the effect of the film depends largely on the application process.

1. In order to avoid dust and impurities affecting the effect of the film, the body glass should be cleaned first before the car film.

2. The parts that may be damaged during the car film should be covered in advance to prevent scratching the car paint, interior and other parts; Accessories that may affect construction also need to be disassembled in advance.

3. After the overall treatment of the car body, it is necessary to start cutting the car film, and the car film should be preliminarily cut according to the size of the glass.

4. Paste the roughly cut car film on the car glass, and then the front and rear gears need to bake the film according to the amplitude of the car glass, and the effect is to make the amplitude of the car film close to the glass, so that the car film will be flat and free of water marks.

5. After baking, the film will be very obediently attached to the glass, and then it is necessary to make further corrections, that is, according to the shape of the glass, the corresponding shape will be finely cut.

6. The glass film is pasted inside, so the key step is to put on the film, and the requirement of the upper mold is to clean the inside of the glass, which is fast and accurate, and pushes out the moisture as soon as possible.

7. After all the work is done, the last need to do an inspection work, after the whole vehicle is pasted, the situation of each window should be checked, especially the corners, and the blistering phenomenon should be dealt with immediately.

Reminder: After the film, it is required that the window cannot be opened for 2-5 days, the rear gear cannot use the defogging function, and the front windshield cannot use the air conditioner to blow the air; Do not use toothed objects to scratch the glass; After the construction is completed, the warranty application form must be filled in, so that the after-sales service in the future can be guaranteed; After 3 days of car film, it is best to go back to the store for a re-inspection, and if there is any quality problem, it should be repaired in time.

1. Window part: according to the different effects and uses, it is divided into side baffle film and front baffle film; The main function of the front windshield film is to significantly improve the driving environment in the car, and at the same time reduce the energy consumption of the air conditioner, so as to achieve the effect of energy saving. Due to the effective blocking of ultraviolet rays, the instrument panel is protected from radiation to prolong its service life.

2. Side shield: it can effectively reflect sunlight and heat, so that the temperature in the car is reduced; The use of light-colored film or one-way film can increase the privacy of the car; It can also reduce damage caused by ultraviolet radiation to items and people in the car.

3. Car interior parts: completely isolated from the outside world after installation, with dust-proof, anti-shoe polish, keep the car clean and other functions. It does not deteriorate or discolor due to high temperature. It is protected from UV, sun exposure and air erosion, and slows down the aging of the interior.

The whole car wrap generally refers to the front and rear windshields and windows, excluding the body and other places. The new car 4S store may give away the whole car film, I need to remind you that the quality of the car film may not meet your requirements, so it is recommended to go to the beauty shop to choose the right car film for the film.

The body film is attached to the surface of the car paint to achieve the purpose of protecting the original paint and decorating the body, and can be easily removed at any time, in contrast to the traditional glaze, coating, painting and other paint chemical changes.

Automobile body film is a high-performance primary and low viscosity polyvinyl chloride film specially designed for automobile body film, which has the properties of fully fitting the surface of various substrates of body paint and interior interior, and has many advantages such as easier construction, flexibility, durability, chemical corrosion resistance, and stronger opacity.

The history of the whole car film.

The global car body film started 20 years ago, and the wealth value created has swept across Europe. This technology was first used in the military, and gradually became popular after being widely used by automobile dealers and various automobile events. Body films for the Chinese market have only been introduced from abroad in recent years, and have rapidly emerged in the Chinese market.

It is a completely different concept from car glass film.

With the popularization and promotion of the body film project, more and more car owners realize the role of the body film, and the body film will become a compulsory project for car beauty or car modification.

The whole car film has a front windshield, a rear windshield, and four windows on the side, be sure to say hello, where to stick, don't be confused, just give money, especially when buying a car, because the gift film that buys a car generally does not include the front gear, because the most expensive front windshield Almost a front windshield is more expensive than all the rest, be sure to ask clearly.

Window film: front and rear windshields, sunroofs, 4 doors and windows.

Paint protection film: all places with paint surface, generally 13 sides.

Front windshield, rear windscreen, 4 doors.

The whole car film refers to the front windshield + rear windshield + window glass all to be filmed.

Car film is to paste a layer of film-like objects on the front and rear windshields, side windows and sunroofs of the vehicle, and this film-like object is also called solar film or explosion-proof heat insulation film. Its function is mainly to block ultraviolet rays, block part of the heat and prevent the sudden burst of glass caused by injury, and at the same time, according to the one-way perspective performance of the solar film, to achieve the purpose of protecting personal privacy. In addition, it can also reduce damage caused by UV exposure to the contents of the vehicle and personnel, which in some ways can save fuel consumption.

Car wrap is applied to the front and rear windshields, side windows and sunroofs of vehicles.

Common sense of car film.

The highest requirement for heat insulation film for car film is the front windshield. According to the traffic safety regulations of the Ministry of Public Security, the light transmittance of the front windshield must be greater than 70%, on the premise that it does not affect driving safety. The front windshield is most taboo to paste dark heat insulation film.

In addition, when choosing a UV resistance index for the heat insulation film, the higher the better, because it protects the center console components from premature aging due to long-term sun exposure.

In terms of side windshield heat insulation film, it is also based on the premise that it does not affect the owner's observation of the rearview mirror. The optional heat shield film on the side windshield is more flexible and the colors are more variable. Some car owners like blueish heat insulation films.

Precautions for car films.

1. After the car is pasted with film, avoid raising and lowering the window within three days;

2. Don't wash the car within three days;

3. Do not open the sunroof when the vehicle has a sunroof within three days, especially when driving at high speed;

4. It is forbidden to apply strong adhesive labels directly to the film within one month after the film, so as not to cause the partial detachment of the film from the glass.

5. After the film is applied in winter, it is recommended not to raise or lower the windows or wash the car within a week. It takes about a month for the front and rear gears to dry.

Nowadays, everyone's economic development ability is getting higher and higher, and many people are buying cars. The car is an expensive luxury brand, so it needs to be more comprehensive and maintained, and car wrap has become popular in recent years. Recently, some car buyers have asked whether the car film is attached to the inside or outside?

Let's explain the problem.

Where is the car wrap attached?

One of the car films is attached to the car body, one is attached to the car windshield, and one is attached to the car window glass. The body film can be maintained into a paint surface, and it can also be used to decorate and design the car according to its own preferences and personalization; Windshield window film reduces glare and ensures excellent visibility; Window wrap protects privacy from sunlight. On the whole, car film can insulate heat and sun protection, ultraviolet light, anti-glare, anti-scratch and explosion-proof type, reduce energy consumption, protect privacy, and improve aesthetics.

Is the car film worn inside or outside?

Generally speaking, the front and rear windshields and window films of the car are all pasted inside, and the long-term wind blowing the sun will cause the film to not stick, roll or decline in effect, and the film will not be easy to suffer from external harm. There is also a fact that if it is attached to the outside, after being hit by external force, the slag of the laminated glass will still be injured, which will not play the role of explosion-proof type. If it is a body film, to put it bluntly, it is attached to the exterior of the car.