Why does my computer just restart, and every time I boot up, there is a blue screen, and there is a

There are three main reasons why there are many possible landlords who have this kind of failure:

1. PCI equipment, memory modules and other equipment are not plugged in or loose;

2. The hardware equipment is incompatible or the equipment itself has quality problems;

3. The hard disk has bad sectors or bad sectors. If there is no problem with the hardware, then the reasons for the automatic shutdown of the computer, automatic restart, frequent freezes, and frequent blue screens 95 or more belong to this reason.

The solution to the problem should be "choose soft and then hard", that is:

1. To solve the problem that the hard disk has bad sectors or bad sectors, you can use the sfc command and the chkdsk command to make a soft repair. To do this, click "Start" - "Run" - enter the command character in the window that appears, and then follow the prompts in the window.

It's important to note that sometimes you'll be asked to restart your PC to fix it when you restart.

2. Check whether the PCI equipment (such as graphics card, sound card, network card, etc.) and memory modules are loose, and it is best to replug and unplug them once, and check whether the gold finger part is oxidized or falling off.

Whoever does it will do the same thing.

What is called a sudden restart, you are clearly an illegal shutdown, that is, it does not shut down through the start menu.

This practice hurts the hard disk, and the blue screen of rebooting is to read the hard disk, and it is good to read the hard disk, if you turn off the computer illegally, it will be like this again, but sometimes it is not, and the probability is very small.

In short, don't shut down illegally, the hard disk is reading data, you just shut it down, hurt the hard disk, and lose data.

My computer is just as depressed as yours lately and has been getting blue screens all the time.

Hello, computer blue screen, mainly: "memory error" or "software incompatibility" caused!

1。Try to boot the computer, after the computer brand is missing, press F8, safe mode, cursor selection: the last correct configuration, enter, enter, press down! [Critical step].

2。No more, enter the safe mode, press enter, and after going to the desktop, antivirus software, full antivirus!

Quarantine" stuff, completely removed!

3。Reuse: 360 Security Guard, "Function Encyclopedia": "360 System First Aid Kit", Nazu.

Point: Start first aid! After restarting, click on the "File Recovery Area" and select all to completely delete the files!

System Repair, Select All, Fix Now! [Critical step].

Network Repair, Start Repair, Restart PC!

360 Security Guard, Scan Plugins, Clean Now! 360 Security Guard, System Repair, One-click Repair!

Kingsoft First Aid Kit], check: [Extended Scan], Scan Now, Process Now, Restart the computer!

4。If you can't do it again, unplug the graphics card and memory module, erase it, use a brush again, clean the slot dust and fan, replace the memory slot, etc.! [Desktop].

etc., uninstall the redundant, and only leave one, because similar software is not compatible with each other! [Critical step].

7。If it still doesn't work, you need to "one-click restore" or "reinstall the system"!

8。If there is a problem with the hardware, send it for repair!

Check whether the capacitor of the power supply has burst or bulge, check the memory--- wipe the gold finger.

It is usually an error related to the hard drive's response. You can try to boot the installation environment with the installation CD, press shift+f10 to start the command line mode, and then check the power supply by the side, if it is not good, it is a memory problem.

The general state of mind is an error related to the hard drive. You can try to boot the installation environment with the installation CD, press shift+F10 to start the command line mode, and then execute the following chkdsk r command to confirm that the result is high.

It is caused by poor contact of the memory module You can use an eraser to wipe the metal contacts on both sides of the memory module.

If the redo system is not good, you have to check the hardware, first check the memory, if the memory is good, then check the hard disk and power supply.

Go to this address and check the error** to find the corresponding solution.