How to set the numbers 1 2 3 in Word for pasted content

Menu Bar:

Format --- bullets and numbers, on the Numbering tab, select the format of the numbers you want and OK. Can.

Ctrl+F Find & Replace, Find Input 1, Replace Input -(1), select Manual Replacement. That's it.

Because there are other places with the same number, the substitution must be selected by hand.

If there are other numbers in Word, it is not good to replace 1 with one.

1) You can think of find and replace based on your context. For example, if the file represents 1 shift, you can enter "1 shift" in the lookup and "one (1) shift" in the substitution field, so that no other numbers will be replaced.

Let's say column A is class 1, 2, 3, 4

B1 input: ="one"&"a1&"）

Just drop down and copy it.

If you want to replace the contents of column A, select column B, copy, select column A, and paste --value.

Find, replace, replace 1 with -(1), you can only do it step by step, because the content you want to replace is different, if there are not many classes, you can change it directly.

If there are other numbers in Word, it is not good to replace 1 with one (1), and it can be considered to find and replace according to your context. For example, if the file represents 1 shift, you can enter "1 shift" in the lookup and "one (1) shift" in the substitution field, so that no other numbers will be replaced.

Just tried it and nothing happened with such a feature. Can't help you!!

Find Replace feature.

Find 1 and replace it with one (1).

1. Write the first reference first, and place the cursor in front of the document.

2. Click on the numbering library at the location of the illustration and select "Define New Numbering Format" in the drop-down menu.

3. Modify the numbering format in the pop-up window, here according to the general reference numbering format, change to:"[1]", select the alignment method you like, and then click OK.

5. After selection, click Insert to get the following renderings, and finally select them"[1]", and then select Start --> Superscript to get the superscript form annotation. Then follow this step.

How to mark references in word.

Open word2010 Click on the start menu, and then find the paragraph, there is a number on it, click on the right down arrow and you will see the definition of the numbering format, as shown in the figure below, and then change the numbering format 1 to [1], and then OK.

Automatically set the word number to [1]. 2]. 3]..Method:

Select the paragraph of text you want to add numbering, the format bullet and numbering Numbering customize, the numbering format defaults to "1."", you are modifying it to "[1.]."That's it.

The system has indentation by default, if your reference can't fit on one line, and you don't want to indent it on the next line, the general ** format specification seems to be like this, just set the tab stop and indentation value to 0.

Item numbers, or numbering, and multi-level lists are freely available in the paragraph settings.

1. Turn on the computer, and then copy it in the word software to open the duword file with **, in the word document.

zhi, use the mouse to select the cell option that needs to be filled with the ordinal DAO number;

2. Find and click at the top of the word page to select the [Start] option, and then find the icon option for automatic numbering. Then find the appropriate serial number style, then find and click on the custom numbering option;

3. Find and click Select in the pop-up window to select the custom option, remove the punctuation in the lower right corner of the serial number, and click to enter the custom option after finding the custom numbering option;

4. Then click to enter the custom numbering list, here you only need to delete the dot in the lower right corner in the numbering format, and the rest of the place does not need to be changed, click the OK option after completion;

5. If you need to align the center cell of the serial number, you need to make the spacing between the serial number and the text input smaller, then select the serial number option, click the custom number option, the custom list option, and the custom option;

6. Select the no special identification option after the numbering, the serial number can be centered and aligned, and the serial number set in this way will be automatically reordered with the increase or decrease of the number of rows.

Material Tool: Word2010

1. Enter a word document with a table self-grid, here take the word2010 document as an example.

2. Enter the toolbar and select [Start] to find the icon button for automatic numbering.

3. The purpose of selecting the custom number is to modify the optional serial number style, and the dot in the lower right corner of the serial number needs to be removed.

4. Enter the [Custom Number] list, here you only need to delete the dot in the lower right corner in the numbering format.

5. At this time, the serial number is automatically inserted, if you want to align the center cell of the serial number, you need to reduce the starting distance between the serial number and the text input.

6. Select the serial number and enter [Custom Number] - [Custom List] - [Custom] again.

7. Select No special logo after the number.

8. In this way, the serial number will be automatically aligned in the center, and the serial number set in this way will be automatically reordered with the increase or decrease of the number of rows, without manual again.

1.Select the first data and let the cursor change to a solid black + sign 2Drag the mouse down, and the data is copied with the same data as cell A23Select the + box in the lower-right corner.

4.Select the fill sequence.

5.Here are the results:

To do this, just select the first two cells, then go to the bottom right corner of the selected cell, and hold down the left button when the mouse becomes a solid cross.

Left-click to select two cells at the same time, and after moving the mouse to the lower right corner to become a cross, +, pull down and it will be automatically filled in order.

Select a footnote number—right-click—note option at the bottom of the page, change the numbering format in the footnotes and endnotes dialog box, and you're done.

Questions and answers to follow-up questions.

Insert Menu - References - Footnotes and Endnotes, select Footnotes, after setting them in the dialog box, Insert, the footnote area and number will automatically appear in the lower part of this page, and you can add the caption text after it. You try.

As follows, remember to check the wildcard, check the superscript in the font column of the format, and leave the replacement blank.

A one-time operation is not possible, but if it is a two-digit maximum, it is still possible to perform two operations.

Click to find in the following items, the main document, after finding it, directly select the document mark with parentheses by default, and you can directly set the superscript.

Then set the two-digit documents.

Click to find in the following items, the main document, after finding it, directly select the document mark with parentheses by default, and you can directly set the superscript.

That's in a special format.

Find and replace, check the wildcard, fill in the font of "Click Format for Replacement", and tick before "superscript".

1. Open the word document and click the "Insert" button at the top.

2. Click "Text Box" in the interface that opens and select "Simple Text Box".

3. Enter the number in the text box.

4. Click "Wrap Text" at the top and select "Float above Text".

5. Drag the text box to the top of **.

1. Click the Insert --- Shape--- Basic Shape--- Text Box tool;

2. Draw a text box on the page;

3. Enter the number 1 in the text box and set its color to red;

4. Click the text box tool to format --- shape fill --- no fill color;

5. Click the text box tool format --- shape outline--- no outline;

6. Copy two of these text boxes and change the numbers to 2 and 3 respectively.

7. Drag the text box with the mouse and place it in the desired position.

In the image processing software, such as ps, add it, such as paste it into the word!

Insert another text box, type 1, and put it on the corresponding **.