How to use Allegro, how to take Allegro?

Updated on amusement 2024-04-10
7 answers
  1. Anonymous users2024-02-07

    Allegro has two boards, hold the latter piece with the right hand, clip the middle of the thumb (at the top of the board), and then flick it and you're good to go.

  2. Anonymous users2024-02-06

    Allegro grip is generally divided into two kinds, 1, a chop or straight grip, the second knuckle of the index finger and the first section of the thumb in front of the beat are pincer-shaped, the distance between the two fingers is 1 2cm, the handle sticks to the tiger's mouth, and the other three fingers are naturally bent and pasted at the upper end of 1 3 behind the board.

    2. The other is the horizontal board grip method, the middle finger, ring finger and little finger are naturally bent to hold the plate handle, the thumb is close to the middle finger on the front of the board, the index finger is naturally straightened, and it is placed obliquely on the reed surface of the back of the plate.

  3. Anonymous users2024-02-05

    Allegro method:Hold a large board in your right hand and a small board in your left hand.

    Take out the large Allegro and the small Allegro and arrange them on the paper. Next, tell your child to hold the big allegro with his right hand. Then, tell the child to raise the allegro and slap the two long planks together to make a sound.

    Next, ask your child to pick up a small allegro with his left hand. Then, use your fingers to control the four small planks to tap together to make a sound, and then, with your left and right hands, pick up the allegro and make a sound at the same time. Finally, tell your child the rhythm of playing Allegro so that he can practice and become more proficient.

    The Allegro performance method is simple, and there are three performance methods: stand-up, counter-mouth, and group talk. The lyrics rhyme freely, and a section of singing can be freely rhymed, which is called Shenqin's "flower rut". During the performance, the actor uses a bamboo board or hits the beat, and generally only performs short programs with strong reasoning or lyricism, and after the art of Allegro is formed, he also begins to focus on creating and performing long-form bibliographies.

    Tips:

    Digging Gong: Stand upright with the knot, cross the index finger through the front gap of the bottom plate, raise the thumb naturally, and stick the middle finger, ring finger and little finger on the back side of the bottom plate, and then shake the wrist and hit the front four plates with the bottom plate, making a "tick" sound, this action is like shaking the wrist when digging a fan. Digging requires natural movements, one sound per half beat, and a smooth and uniform speed.

    Teasing work: Based on the work, the speed is accelerated by a number of times, and the upper plate is "lifted" up with the bottom plate, making a "beep" sound, and this work is used to enhance wrist strength.

    Twisting Gong: Hold the knot horizontally, press the thumb on the top of the knot, and push the elbow and wrist upwards to make the knot upside down, and also make a single-point "tick" sound, the speed is the same as that of the knot.

    Shake the gong: Stand up the knots, face outward, put the thumb on the waist of the younger brother's board, shake the wrist from side to side, and hit the first four boards with the bottom plate, making a "tick" sound. When the first four pieces are held up, they are bounced back by the thumb, and there is a sound of "click" wide objects, and so on, the first half of the beat is "click", the second half of the beat is "tick", and the speed is even and not fast.

    Shaking Gong: On the basis of shaking Gong, the wrist shakes rapidly and continues to make a "What's the Noise." ...sound, the speed should be even, do not be fast and slow.

  4. Anonymous users2024-02-04

    Prepare materials: bamboo boards, saws, pens, iron nails, pliers, candles, lighters, rope, knives.

    1. First, use a knife to flatten the bamboo board, and then polish it smooth for later use.

    3. Hold the nail with pliers, and then put the nail on the fire to burn red.

    4. After the iron nail is burned red, drill two holes on the top of the bamboo board with the iron nail.

    7. Tie 2 long bamboo boards together.

    8. Done.

  5. Anonymous users2024-02-03

    8-11 years of bamboo board, green, fire-roasted, painted, punched, threaded It seems simple, there are many doorways The timbre and sound quality made by the layman are not good Or go buy a pair.

  6. Anonymous users2024-02-02

    The Allegro usage is as follows:

    1. How to play the knots "Grip": The smaller knots are generally held in the left hand, and the index finger is placed in the first.

    Between the four and five leaves, the fifth leaf is clamped with the middle finger, and the other four are held in the tiger's mouth, with the thumb on the top of the first one.

    Then use the power of the rotation of the wrist digging wheel to hit the knuckle board down first.

    Four or five lower ends collide to produce an audio. After that, the rhythm is manipulated in the direction of the wrist up and down, down and up.

    2. "Single point" and "double point" play: their rhythm is two rings and one beat, the speed should be steady, the sound should be scattered and evenly stared, and it cannot be fast or slow, nor strong or weak. This mainly depends on the balance of force of the wrist turning up and down. These are the basic "à la carte" plays.

    Third, the "double point" method of play is to make changes on the basis of "single point", the first digging wheel accounts for half a beat, or the same first down, the second time to turn up, it is in.

    The lower end of the fourth and fifth doors and the first one and the thumb make two legato sounds, which together take up half a beat.

    Fourth, the "flower point" play: when the "single point" and "double point" have been practiced, the comprehensive is the "flower point", that is, the first beat of the single point, the second beat of the double point, so that a single and double hit, the flower point is practiced. Among them, the thumb is mainly moved up and down to control the change of single and double points, and the rotation law of the wrist is quietly unchanged.

    Fifth, the "train point" play: this style of play is more difficult, also known as the "connecting point" play, it is formed by strengthening the vibration of the wrist when playing the "double point", the rhythm is like a beat out of four sounds, like the speed of the train.

    How to play the big board "Grip": Hold the bottom fan with the right hand, and the palm under the finger and the finger is close to the straight edge of the bamboo board, leaving no gaps. The tip of the thumb is level with the eye of the board, and the other four fingers are pressed against the other straight edge of the board, leaving no space between the fingers.

    The palm of the hand close to the curvature of the bamboo tile ridge is arched to create a "resonance box", and the upper fan is raised first.

    Sixth, the "positive tone" play: contrary to the momentum of the knuckle board, the big board is first up and then down, and the upper plate is thrown down, so that the bottom end of the two plates collides to make a sound. Then use the impact force of the fan plate to lift the upper fan, and practice repeatedly.

    The key is to pay attention to whether there is air leakage in the "resonance box", check whether there are gaps in the various parts of your gesture at any time, and stare at it so that you can correct it while playing, and listen carefully to the sound improvement.

  7. Anonymous users2024-02-01

    Hold down the top of the knot, and when the knot is held up with the wrist, the thumb is pressed down, and the finger hits the bottom plate machine, making a clicky single-point machine sound, this rhythm is suitable for the pallet board for 1 4 beats, and the speed is faster.

    Hold down the top of the knot, and hold the knot up with your wrist, press down with the key finger to hit the bottom plate machine, making a clicky single-point machine sound, this rhythm is suitable for the pallet board for 1 4 beats, and the speed is faster. <>

    Click: The wrist twists left and right to push the knot, and the finger blocks the waist of the knot, hitting the bottom plate machine of the knot, making a ticking sound when pushing up, and making a clicking sound when blocking back, just like the shaking of a clock, producing a two-point rhythm, which is suitable for the sentence structure of Qiaokou:

    Single:

    When the top of the knot is held down, and when the knot is held up with the wrist, the thumb is pressed down and hits the bottom plate machine, making a single point machine sound of clicking only vibrato, this rhythm is suitable for the pallet for 1 4 beats, and the speed is faster.

    Click

Related questions
11 answers2024-04-10

Hello, you should have taken the wrong path.

Look at the map. >>>More

11 answers2024-04-10

Be clear about the purpose and benefits of dental floss before flossing, because dental floss is not suitable for everyone, and it is difficult to master his skills, so many people will ask the same question: "How to floss"? >>>More

3 answers2024-04-10

Hello! Know how to get the value of wealth:

1.New users log in to Wealth +20 for the first time >>>More

7 answers2024-04-10

1. Before using the curling iron, remember to fully preheat it first, because if the temperature of the curling iron is not enough, then the curled hair will not have a curvature at all, which is equivalent to you spending time in vain, and it will also cause damage to the hair. >>>More

16 answers2024-04-10

There are instructions on the back.

Do not go near the fire, do not disassemble, do not get into the water, etc. >>>More