How to deal with continuous paper running on the printer?

This problem is very common, and the reason is not that the paper itself is set up, but that you have not selected the paper type of your printer well.

First of all, you need to use a ruler to measure the height and width of the paper you are using (especially the height, please try to measure it accurately, otherwise it will be slowly misplaced after printing multiple sheets in a row), measure the size of the paper, in"Printers and faxes"The lower point of the window"files"Select"Server properties", in"Print server properties"dialog box"Create a new format"Tick, then enter your measured width and height, rename the format, and click"Save the format"(Don't forget).Your paper settings are OK, and then just change the driven paper settings to the paper you named ("Printing preferences"-"Advanced"-"Paper Specifications"- Find the paper you just named after changing"OK"), set OK

First of all, you need to use a ruler to measure the height and width of the paper you are using (especially the height, please try to measure it accurately, otherwise it will be slowly misplaced after printing multiple sheets in a row), measure the size of the paper, in"Printers and faxes"The lower point of the window"files"Select"Server properties", in"Print server properties"dialog box"Create a new format"Tick, then enter your measured width and height, rename the format, and click"Save the format"(Don't forget).Your paper settings are OK, and then just change the driven paper settings to the paper you named ("Printing preferences"-"Advanced"-"Paper Specifications"- Find the paper you just named after changing"OK"), set OK

Note that if your document is open during setup, please restart the document and print again. Or reset the drive paper again when printing, otherwise it will not work.

How to deal with continuous paper running on the printer? (Multiple Choice).

Hello, how to deal with the continuous running paper of the printer finch wheel? 1. Paper: moisture or electrostatic adsorption.

The solution is to replace the paper with a new one that has been stored for a short period of time, not too much at a time when putting it in the paper box, and shake the whole stack of paper as much as possible before putting it in the paper box. 2. Car age change equipment: paper roller and page judge.

The solution is to clean the paper roller and pagination with cotton dipped in alcohol first, and if it still doesn't work, consider replacing it. 3. Solve the problem in the order of paper first and then equipment.

Nowadays, people use printers more frequently, office or study may use printers, and the process of using the printer will inevitably occur some failures, so, what to do with the printer continuous output? Next, pchouse will take you to understand.

The printer's continuous paper output can be due to the following reasons:

1. Paper roller: aging can not feed paper.

2. Stuck under the toner cartridge: It may be a laser, or there may be a problem with the fixing component, and the fixing film inside is broken and needs to be replaced.

3. Where it appears: the fixer film is ruptured and needs to be replaced.

4. The quality of the copy paper is poor, or the paper is damp.

5. There is a rectangular plastic guide tape paper piece on the bright hand above the paper roller of the machine, and the general user improperly uses force when taking the jammed paper, and the paper will be jammed when the printer normally lifts the paper.

Solution: 1. Replace the copy paper.

2. Check whether the paper roller of the machine is aging, if it is aging, please replace it.

3. Reach in from the paper feed port with your hand and touch the plastic guide paper piece to make it smooth and the machine recovers.

Summary. Hello and thank you for your question. Loading multiple pages at a time when printing can be caused by the following reasons:

The loaded paper is in an incorrect position, below the arrow symbol on the left rail inside the printer.

The boundary of inkjet printers is based on the right border, dot matrix printers are based on the left boundary, and laser printers are based on the center. If the left rail of the printer fits snugly against the left edge of the paper, it will cause the paper to be loose and tilted, and it is easy to twist or multi-page paper when feeding.

When the paper is too curled or wrinkled, it can also be fed multiple pages at once. If this happens, you can flatten the paper or curl it slightly in the opposite direction a few times to see if that resolves the problem.

This can also occur if the paper is thick and the position of the adjustment lever does not match the type of medium. When printing documents on media of regular thickness, the adjustment lever should be pulled to the "0" position; When printing on envelopes and thicker paper, it should be wrenched to the "+" position. However, some models do not have this adjustment lever.

What's going on with printers running more paper.

Hello and thank you for your question. Feeding multiple pages at a time when printing a printer may be caused by the following reasons:1

The loaded paper is in an incorrect position, below the arrow symbol on the left rail inside the printer. 2.The boundary of the inkjet printer is based on the right border, the dot matrix printer is based on the left border, and the laser printer is based on the center as the sensitive bending standard.

If the left rail of the printer is close to the left edge of the paper, the paper will be loose and tilted, and it will be easy to twist or multi-page paper when feeding. 3.When the paper is too curled or wrinkled, it can also be fed multiple pages at once.

If this happens, you can flatten the paper or curl it slightly in the opposite direction a few times to see if that resolves the problem. 4.This can also occur if the paper is thick and the position of the adjustment lever does not match the type of medium.

When printing documents on media of regular thickness, the adjustment lever should be pulled to the "key 0" position; When printing on envelopes and thicker paper, it should be wrenched to the "+" position. However, some models do not have this adjustment lever.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that I am satisfied with the answer of Fu Lu, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

Pro, the continuous paper output of the printer may be due to the following reasons: 1. Paper wheel: aging cannot feed paper 2. Stuck under the toner drum: it may be a laser, or it may be a problem with the fixing component, and the fixing film inside is broken and needs to be replaced3

The fuser film is broken and needs to be replaced4, the quality of the copy paper is poor, or the paper is wet. 5. There is a rectangular plastic paper guide sheet above the paper roller of the machine, and the general user improperly uses force when taking the jammed paper 5 At this time, the paper will be jammed when the printer normally lifts the paper Solution: 1. Replace the copy paper 2. Check whether the paper roller of the machine is aging, if it is aging, please replace it with Weilian 3.

Summary. Dear, hello, I am happy to serve you 1. First see if the label paper is not standardized, whether the size of each label is consistent, if it is caused by this reason, then the label paper can only be replaced. If the label is detected as fine, then the machine has not detected the paper and needs to be re-tested.

2. Turn the print on, then press and hold the pause and feed buttons at the same time and then turn on the machine, until the three display lights flash at the same time and let go to initialize the machine, then turn it off, press and hold the pause button to test the paper, wait until the machine comes out of the paper and then let go, until the machine retracts and then starts printing. 3. Check whether there is any debris or dirt blockage in the label sensor, and it is best to clean it up; Take a look at the size of the software design to see if it is the same size as the actual label.

Dear, hello, I am very happy to serve you 1, first see if the label paper is not standardized, whether the size of each label is consistent, if this is the reason, then you can only replace the label paper. If the problem of detecting that the label is not bridged and merged, then it means that the machine has not detected the paper and needs to re-test the paper. 2. Turn the print on, then press and hold the pause and feed buttons at the same time and then turn on the machine, until the three display lights flash at the same time and let go to initialize the machine, then turn it off, press and hold the pause button to test the paper, wait until the machine comes out of the paper and then let go, until the machine retracts and then starts printing.

3. Check whether there is any debris or dirt blockage in the label sensor, and it is best to clean it up; Take a look at the size of the software design to see if it is the same size as the actual label.

Kiss 1Cainiao Station is generally used to use a thermal printer to print the fast banquet sail delivery number is destroyed, this kind of printer will continue to move the paper if it does not correctly identify the paper, at this time it is necessary to calibrate the paper. Different machine paper calibration methods are different, most of them are to press and hold the paper feed button for more than 3 seconds to start automatic calibration, some things standby press, some are turned on press, according to the machine different operations are also different, it is recommended to check the current machine manual.

2.Setup problem, no label mark detected so keep out the paper, you should be a sedan with a ribbon barcode printer, the machine may be set in thermal label mode. There are spacing labels, just set the spacing height.

If this does not solve the problem, it is recommended to reinstall the printer driver and reinstall the printing software, which can be solved.