The dot matrix printer has too much paper and how to solve it

Solution: 1. Open the print server properties:

Windows 2000 XP Operating System Start - > Control Panel.

"Printers & Faxes", click on "Files" on the page - >Server Properties" (Fig.

Windows 7 8 Operating System "Control Panel" - > Hardware & Sound ">View Devices & Print", left-click on the printer icon and select "Print Server Properties" above (Fig.

2. Custom paper: Measure the paper size first, select "Create New Format New Form" in the print server properties, fill in the custom paper name in the "**Name Form Name", and fill in the paper width and height in the "Paper Size" below (please note the paper width value, the width of the 80-column printer should not be exceeded, and click "Save Format Form" after setting it (Fig.)2）；

3. Select the available paper format in the printer properties

Windows 2000 XP Operating System "Start" - > Control Panel "->Printers & Fax", click "File" -> "Start" -> Control Panel > Printers & Fax" on the page, right-click the printer icon, and select "Properties" - >Device Settings".

Windows 7 8 Operating System Control Panel > Hardware & Sound >View Devices and Prints", right-click the printer icon and select Printer Properties > >Device Settings

Select the paper defined earlier in the "Scroll Feed Field" of "Device Settings" and click "Apply" or "OK" (Fig.

4. Set Printing Preference Paper:

Click "General" in the printer properties - > Printing Preferences - >Advanced", select the paper you just customized in the "Paper Specification" column in the "Paper Output" option, and click "Apply" or "OK" (Fig.

5. The default paper of the general software is A4 paper, after the above custom paper settings are completed, you need to select the corresponding paper specifications in the software or document currently used, for example, the following is the paper setting method of Word, Excel common software (please consult the software customer service for the specific operation method of other software):

Word, Excel, WPS and other office software.

The paper setup path: "File" -> Page Setup "->Paper (Size)" (Fig., select the name of the custom paper.)

Dot matrix printersCauses of too much paper feeding:

One under normal circumstances, the photoelectric sensor after paper loading.

Sensing the presence of paper, a telecommunication signal is generated back to the control panel.

gives a signal with paper. If the photoelectric sensor is not cleaned for a long time, the surface of the photoelectric sensor will be attached to the paper scraps, dust, etc., so that the surface of the sensor is dirty, and the light cannot be correctly sensitized, and such a situation will occur.

Workaround:

Cleaning, photoelectric sensors, cleaning and cleaning, photoelectric sensors. Check the printer paper.

Whether the position is placed correctly, the correct is that the paper height can not be higher than the arrow sign on the left guide rail of the paper slot, check whether the printing paper specifications meet the requirements of use, by default, the printing paper weighing up to 60 180 grams can meet the requirements, and the ultra-thin printing paper below 60 grams, it is easy to appear that the phenomenon of multi-page paper is fed at the same time.

Dot matrix printer uses:

1. High-speed dot matrix printers occupy an important position in the fields of finance, post and telecommunications, transportation and enterprise units to process printing data in batches. Its main feature is that the printer is fast. High-speed dot matrix printers have higher quality, high printing speed, and can bear heavy printing loads.

2. With the development of electronic in various industries, the passbook is specially used for the counter business of banking, post and telecommunications, insurance and other service departments.

Dot matrix printers have been rapidly popularized and used in response to the rock difference.

3. The pure jujube source of line dot matrix printer can meet the requirements of high-speed batch printing business in banking, telecommunications, taxation and other industries. Line dot matrix printer is a high-grade dot matrix printer, with a strong tendency to professional printing, there are special Western character printers, there are also special Chinese character printers.

4. General-purpose dot matrix printer, especially suitable for ordinary offices and financial institutions with more report processing. Because it is generally a wide-format printer, it is compatible with DOS systems.

The above content refers to Encyclopedia - Dot matrix printer.

1. Reasons for too much paper feeding in dot matrix printers:

Generally, dot matrix printers are equipped with a photoelectric sensor under the word roller to detect whether there is a shortage of paper. Under normal circumstances, the photoelectric sensor senses the presence of the paper after loading, generates a telecommunication signal to return, and gives a signal with paper on the control panel. If the photoelectric sensor is not cleaned for a long time, the surface of the photoelectric sensor will be attached to the paper scraps, gray field dust, etc., so that the surface of the sensor is dirty, and the light cannot be correctly sensitized, and there will be false alarms and clever calls.

2. Treatment:

Unplug the power supply and open the cover. For most dot matrix printers, after removing the upper cover, Song Kuansu should first remove a small cover plate parallel to the print head at the lower part of the print head (about 20 cm long and 1 cm wide), and push the print head to the middle (inkjet printers generally do not have this small cover), so that the upper cover can be removed, otherwise it will not be able to take it off. Remove the screws around the perimeter of the printer (most of them are at the bottom of the printer), slowly move to disassemble the shell, and then remove the black paper feed roller, pay attention to the two sides of the paper roller are stuck by a notch through two iron sheets, as long as you push it hard to make it rotate around the paper roller, you can take off the paper roller.

At this time, you can see a small photoelectric sensor under the paper roller, remove the surrounding dust, wipe the bald head with an alcohol cotton, wipe off the dirt, reinstall the paper roller, cover, etc., and turn on the machine. It is recommended to find a professional for this operation.

Summary. Hello and thank you for your question. Loading multiple pages at a time when printing can be caused by the following reasons:

The loaded paper is in an incorrect position, below the arrow symbol on the left rail inside the printer.

The boundary of inkjet printers is based on the right border, dot matrix printers are based on the left boundary, and laser printers are based on the center. If the left rail of the printer fits snugly against the left edge of the paper, it will cause the paper to be loose and tilted, and it is easy to twist or multi-page paper when feeding.

When the paper is too curled or wrinkled, it can also be fed multiple pages at once. If this happens, you can flatten the paper or curl it slightly in the opposite direction a few times to see if that resolves the problem.

This can also occur if the paper is thick and the position of the adjustment lever does not match the type of medium. When printing documents on media of regular thickness, the adjustment lever should be pulled to the "0" position; When printing on envelopes and thicker paper, it should be wrenched to the "+" position. However, some models do not have this adjustment lever.

What's going on with printers running more paper.

Hello and thank you for your question. Feeding multiple pages at a time when printing a printer may be caused by the following reasons:1

The loaded paper is in an incorrect position, below the arrow symbol on the left rail inside the printer. 2.The boundary of the inkjet printer is based on the right border, the dot matrix printer is based on the left border, and the laser printer is based on the center as the sensitive bending standard.

If the left rail of the printer is close to the left edge of the paper, the paper will be loose and tilted, and it will be easy to twist or multi-page paper when feeding. 3.When the paper is too curled or wrinkled, it can also be fed multiple pages at once.

If this happens, you can flatten the paper or curl it slightly in the opposite direction a few times to see if that resolves the problem. 4.This can also occur if the paper is thick and the position of the adjustment lever does not match the type of medium.

When printing documents on media of regular thickness, the adjustment lever should be pulled to the "key 0" position; When printing on envelopes and thicker paper, it should be wrenched to the "+" position. However, some models do not have this adjustment lever.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that I am satisfied with the answer of Fu Lu, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

Summary. Printing paper paper is not good. Some of the printed paper is of poor quality, plus some users have a poor working environment.

After the printer is used for a period of time, paper scraps and dust are left on the surface area of the paper roller, which reduces the paper rolling strength, resulting in slippage, and the phenomenon of not feeding paper or feeding paper is crooked.

When the fixed frame structure of one of the paper rollers is loose, the paper feeding function of the wheel is lost, resulting in the paper entering the paper being imcorrect.

The movable paper baffle on the printer's paper tray is too far away from the edge of the paper, causing the paper to swing from side to side.

The dot matrix printer feeds unevenly.

Dear, I'm glad to answer your questions.

There are three ways to solve the problem of dot matrix printer offset: Method 1: Adjust the left margin in the application software, if the printing content is left, increase the value in the left margin.

Method 2: If the print content is offset by 1cm to the left, you need to move the balance plate to the left by 1cm. Method 3:

1. In the "Printing & Equipment" section of the control panel, select the LQ-730K icon, right-click to select "Printing Preferences", and select "Extended Settings". 2. The horizontal offset and vertical offset in the drive are "0" by default, if the printed content is 1cm to the left, you need to adjust to the right, the horizontal offset is to adjust the offset value, click Apply, and then click OK.

Hope it helps, yo <>

If the feed is uneven, you can see how many inches of paper the printer is printing, compare how big your paper is, and then adjust.

This printer.

The paper is all pushed flat.

But when the printer sucks up the paper, it is slanted.

Enquire now. There are four common causes of skewed paper feeding: foreign objects falling into the printer's paper feeder. The clump rental splitting machine has to touch the paper input and output, so foreign objects can easily fall into the inside of the printer from these channels.

Printing paper paper is not good. Some of the printed paper is of poor quality, plus some users have a poor working environment. After the printer is used for a period of time, paper scraps and dust are left on the surface area of the paper roller, which reduces the paper rolling strength, resulting in slippage, and the phenomenon of not feeding paper or feeding paper is crooked.

When the fixed frame structure of one of the paper rolling rollers is loose, the paper feeding function of the wheel is lost, resulting in the paper entering the paper is not correct. The movable paper baffle on the printer's tray is too far away from the edge of the paper, causing the paper to swing from side to side.

You can tweak it.

What is it? Doesn't the above method work?

If it doesn't work, you can contact his customer service.

1. First of all, check whether there are some debris in the paper feed holder, such as paper balls, debris, etc., if there is a need to clean up these debris, and pay attention to avoid other foreign objects entering the printer during the printing process. 2. Secondly, you can try to replace the printing paper, use the best printing paper, if the quality is poor, it is easy to slip or produce paper scraps and then get stuck. At the same time, it is necessary to pay attention to the inspection of the paper wheel, to see if there is dust on it, the paper will be reduced, and the printing paper will be crooked.

3. Check whether the fixed frame of the paper roller is loose, if there is, replace this part, to prevent it from being loose, you need to pay attention to the choice of printer to find some of the best, the cost performance can be medium to high, but you must not choose the quality is too poor, otherwise the fixed frame of the paper roller will be loose. Hope it helps.