Which non standard ultrasonic cleaner to choose? There are familiar pointers

Jiuxin ultrasonic cleaning manufacturers can, my ultrasonic cleaning machine is purchased from there, I buy a standard ultrasonic cleaning machine, the power is not too big, the power is 120w, the capacity seems to be, I have used it for so many years without any problems, I think its quality is OK, the cleaning effect can also be, I think this is enough.

As far as I know, the current Jiuxin ultrasonic cleaning machine can be done, it specializes in a single tank ultrasonic cleaning machine, not only specialized in a single tank, but also a single tank together, which is practical for small factories and factories that have just been built and the power is not so large, small factories or just beginning the business volume may not be so much, will choose a single tank, and wait until the business volume is large, a number of single slots will be spliced together, because Jiuxin ultrasonic cleaners are set up like this, which is humane.

I'm a car repairer, some shops are on the ultrasonic cleaner, I want to last one, I have consulted some customer service, I feel that they are not specialized, I am serious, so I picked for a long time and did not choose. The customer service of Jiuxin ultrasonic cleaning machine told me a lot, reminded me the most, asked me a lot of questions, told me what to pay attention to when cleaning, etc., and finally helped me choose a few models, asked me what kind of I need to pick among these models, I think Jiuxin ultrasonic cleaning machine is the best service I know of a few of them, I have not decided, but I have planned to buy, and I want to hear everyone's opinions.

Boda mass-produces a range of standard ultrasonic cleaners, and can also produce a series of non-standard ultrasonic cleaners according to customer requirements. And the quality is ***.

Users can choose products with different functions such as heating, power regulation, dual frequency, high frequency (59k, low noise, suitable for fine washing), and frequency sweeping according to their needs.

1.The choice of power.

The ultrasonic cleaning effect is not necessarily proportional to the (power cleaning time), and the power is too small, which will make the cleaning time too long;

And the power is too large will make the more precise parts produce corrosion points, and the cavitation at the bottom of the cleaning cylinder vibrating plate is serious, and the water point corrosion is also increased, when using water or water-soluble cleaning liquid, it is easy to be affected by water point corrosion, if the surface of the vibrating plate has been damaged, the cavitation corrosion under the water under the strong power is more serious, so the ultrasonic power should be selected according to the actual use.

2.Choice of frequency.

The frequency of ultrasonic cleaning is between 28kHz and 120kHz, and 40kHz is generally used for ordinary items;

For the physical cleaning force caused by cavitation when using water or water cleaning agent, it is obviously beneficial to low frequency, and generally uses about 28-40kHz;

For the cleaning of parts with small gaps, slits and deep holes, it is better to use high frequency (generally more than 60kHz);

When cleaning the clock parts, use 400kHz, if you use broadband FM cleaning, the effect is better.

3.Selection of the temperature of the cleaning solution.

Because the temperature of the cleaning solution is too high or too low, it will affect the cavitation effect, which will affect the cleaning reaction effect of the cleaning machine, and the most suitable cleaning temperature of the cleaning solution is generally 30-40.

4.Determine the amount of cleaning fluid and the location of the cleaning parts.

Generally, the liquid level of the cleaning liquid is more than 100mm higher than the surface of the vibrator. Because the single-frequency cleaning machine is affected by the standing wave field, the amplitude at the wave node is very small, and the amplitude at the wave amplitude is large, resulting in uneven cleaning. Therefore, the best choice for cleaning items should be placed at the amplitude of the wave.

Jiangsu Jiujiu Jiayi Ultrasonic Technology **** will answer for you: Nowadays, the use of ultrasonic cleaning machines is becoming more and more extensive, so what fields can generally be used in general, and the following are the common use areas of ultrasonic cleaning machines.

1. Electronic engineering, the cleaning of various electronic components is completed by ultrasonic cleaning machine, which can ensure that electronic parts are efficiently derusted and degreased, and do not harm the parts.

2. Optical equipment, which can clean glasses frames, lenses and optical instruments, etc. It is also possible to wash everyday items and accessories such as gold and silver jewelry, razors, watches, etc.

3. Vegetables and fruits can be cleaned with ultrasonic cleaning machine to clean pesticide and fertilizer residues, as well as sterilization and disinfection, which can improve the safety of vegetables and fruits.

4. The cleaning of office products, such as printer ink heads, nozzles, brushes, etc., can be cleaned with an ultrasonic cleaning machine, and the effect is very good.

5. The cleaning of medical equipment, such as surgical instruments and medical equipment, is more difficult to clean manually, but the ultrasonic cleaning machine can play a better cleaning effect.

Good heat dissipation system (strong stability).

The automatic ultrasonic cleaning machine dissipates heat quickly, and the 3D heat dissipation system can protect the circuit, which is of fundamental significance for enhancing the service life of the machine.

2.The cleaning effect is second to none (**high strength).

The transducer of the automatic ultrasonic cleaning machine is a very important component of ultrasonic, the cavitation effect of the imported brand transducer is higher, and the cleaning effect is more significant.

3.Excellent ease of use (user-friendly).

The inlet and outlet device is made of high-quality stainless steel, which has strong corrosion resistance and strong switch adjustability. Not only that, the automatic ultrasonic cleaning machine also has a filter drainage hole, and the drainage hole of the cleaning machine has a filter screen, which is convenient for users to clean small parts and prevent parts from entering the drainage hole and causing unnecessary losses.

4.Work is super silent (does not interfere with work or rest).

When working, it does not have a large noise, because the automatic ultrasonic cleaning machine adopts noise reduction technology, which will not disturb the work and rest when working, and it also has a safety protection function, which truly achieves the comprehensive and safe cleaning.

The automatic utensil cleaning machine CTLW-120 has a patented technology Twins cleaning and drying system, which realizes the in-situ cleaning and drying of utensils, the cleaning chamber material SUS316L, and the shell material SUS304.

Fully automatic utensil washing machine.

Suzhou Hisiyuan.

Ultrasonic cleaning effect is good and easy to operate. The sound that people hear is a sound wave signal with a frequency of 20-20000Hz, and the sound wave above 20000Hz is called ultrasound, and the transmission of sound waves travels longitudinally according to a sinusoidal curve, producing a large number of small bubbles. One reason is that the tensile stress in the liquid forms a negative pressure, and the decrease in pressure makes the gas originally dissolved in the liquid supersaturated, and escapes from the liquid to become small bubbles; Another reason is that the strong tensile stress "tears" the liquid into a cavity, which is called cavitation.