You can t plug in the USB flash drive and plug in the blue screen 10 of the system before booting up

I also encountered the same problem, and finally went through a lot of hard work to solve it, and now I share it.

This phenomenon mainly occurs in recent new computers, and the motherboard supports UEFI, which is why this phenomenon occurs. The main USB flash drive has a main boot virus ripper, which cannot be detected by 360, so you have to use a professional detection and killing tool. Or use the partition tool Diskgenius to rebuild the partition table MBR and keep the sectors, and this phenomenon will not occur after saving and then entering it.

Good luck!!

I'm in the same situation now.,That is, after the system is completed, go to Windows XP on the blue screen.,In the case of the U disk is not pulled.,There is also the problem of blue screen when two hard disks are hung.。

Did you find a solution? I've also encountered this situation recently, and I haven't solved anything by rebuilding MBR boot according to the garbage on the Internet...

I'm also having the same problem, if there is a good solution, can you share it with us.

The boss menu is set to priority U disk start, and you can change it to priority hard disk start.

Try wrapping on a virtual machine.

Let me tell you, go into the hard disk partition tool, put the C drive, that is, the system disk, and reset the master boot record.

This is just a matter of BIOS settings, so let's look into your own motherboard BIOS settings.

Don't plug it in to start.,Probably you recognize the U disk when you start.,That's normal.。

Hello, the blue screen of computer boot is mainly caused by: "There is an error in the memory" or "abnormal shutdown"!

1。Try to boot up, after the computer brand is out, press F8, Safe Mode, Cursor Select: Last Correct Configuration, Enter, Enter, Press Down! [Critical step].

2。No more, enter the safe mode, press enter, and after going to the desktop, antivirus software, full antivirus!

Quarantine" stuff, completely removed!

3。Reuse: 360 Security Guard, in the "Function Encyclopedia": "360 System First Aid Kit", point: start first aid! After restarting, click on the "File Recovery Area" and select all to completely delete the files!

System Repair, Select All, Fix Now! [Critical step].

Network Repair, Start Repair, Restart PC!

360 Security Guard, Scan Plugins, Clean Now! 360 Security Guard, System Repair, One-click Repair!

Kingsoft First Aid Kit], check: [Extended Scan], Scan Now, Process Now, Restart the computer!

4。If you can't do it again, unplug the graphics card and memory module, erase it, use a brush again, clean the slot dust and fan, replace the memory slot, etc.! [Desktop].

etc., uninstall the redundant, and only leave one, because similar software is not compatible with each other! [Critical step].

7。If it still doesn't work, you need to "one-click restore" or "reinstall the system"!

8。If there is a problem with the hardware, send it for repair!

It's okay.,You can't plug in the U disk before starting.,Otherwise, the computer won't be able to boot normally.,All computers are like this.,If you doubt, you can try other computers.。

You can turn down the boot startup item to hard disk boot in Baier's death, and then take your USB flash drive to the grid...

Is it to start the first start item set from the U disk boot, the system can not be found.

Where to drive? Is it a problem with the coms setting, modify it and try it.

One of the reasons for the system partition of Windows is disk error or file error Solution: Perform a disk scan program to do a full test of all the disk drives to see if there are disk errors or file errors on the disk drives.

Why. 2. The SATA or IDE controller driver of the motherboard is damaged or installed incorrectlySolution: Reinstall the SATA or IDE controller driver provided by the motherboard driver.

Why. 3. The computer has been attacked by malicious programs such as viruses, Trojan horses, and rogue software: Perform a comprehensive inspection of the computer by security protection software to see whether the computer has been attacked by malicious programs such as viruses, Trojan horses, and rogue software.

In addition, if it is the cause of U disk poisoning, you can also use the U disk PE tool to repair the U disk, if the hard disk is also infected by a virus, you can also use a tool to rebuild the hard disk MBR, and rebuild the U disk after the MBR, it is impossible to start the PE tool in the U disk, at this time, you should run the original PE production tool to repair it, or redo the U disk PE!So that the blue screen will be gone.

Is there a problem writing to the hard drive image? Or there's something wrong with the ISO under it.