How to use a wireless router, do you want a computer, or where to put it

The wireless router is connected from the cat to the wireless router, and then connected to the wireless router through the computer. Once you've set up broadband dial-up and wireless networking.

Mobile phones, laptops, etc., can access the Internet through the wireless signal sent by your wireless router. After setting up, as long as the wireless router is powered on, put it on the line. Internet access is available within the signal coverage of wireless routing.

You can do without a computer, but the router should be set up through the computer (such as a wireless password).

The wireless router should also be connected to the original network cable. It turns out that if the network cable from the cat is connected to the router, it will come out of the router wired or wireless to the computer. To have a computer wired connected to the router is well configured.

Follow the instructions, plug the network cable into the WLAN port, and then plug in another network cable casually. Then enter it in the online neighborhood, and then follow the steps to set it up in it, hope.

When you use it for the first time, you need to use the computer to set it up, and you can put it there after setting it up, and you can use wifi for mobile phones, tablets, laptops, etc.

Of course. Plug your broadband socket directly into the router and set it up according to the manual. If not, you can call me.

You don't need a computer, but you need broadband, and you need to set it up on the computer for the first time.

If you don't use a computer, you can put it in the receiving range, and if you get closer, the signal will be stronger.

There is a manual inside the router, all in Chinese, as long as you know a little bit of computer knowledge, you can connect.

No, just plug in the internet cable.

Once set up, you can put it anywhere, no computer required.

Just put one in one place, and then you can use a notebook to link it and you can use it.

You need to connect to a computer.

Just connect it to your computer.

Normal wireless routers can be turned on all the time, and they don't need to be connected to a computer, just connect a broadband network cable. The wireless router is to provide the wifi signal, and the mobile phone can be set up with a wireless router.

To set up a wireless router on your phone, you need to use the browser of your phone to enter the router settings interface. When the general wireless router is working normally, there is no need to change the settings. Here is an example of changing the settings of wireless wifi to be buried.

The steps are as follows: 1. Run the browser on your phone.

2. In the address bar at the top of the browser, enter the router login address.

<>4. Enter the login username and password.

5. After logging in, select Wireless Settings.

6. You can modify the wireless network user name here.

7. Pull down to the password, you can change the wireless network password.

8. Click Save Settings to complete the modification.

The wireless router does not need to be connected to a computer.

1.First of all, if there is a wireless router, then turn on the power supply first, and then plug in the network cable, plug in the WAN port (usually the blue port), and then plug in the LAN port with the network cable connected to the computer, after doing these jobs, then you will see that there is an address and account password behind the router, and after connecting, enter the address you see on the router in the browser, generally;

2.Then enter, enter the corresponding account and password, generally the newly bought admin;

3.Enter the operation interface, you will see a setup wizard on the left, and click to enter (generally it will pop up automatically;

4.Click Next, enter the Internet access mode settings, you can see that there are three Internet access options, if it is dial-up, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP;

5.If you choose PPPoE dial-up Internet access, you need to fill in the Internet account and password, and you will have an account number to open broadband, just fill it in;

6.Then the next step is to enter the wireless settings, you can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in at will, and then the mode is mostly 11BGNThe wireless security option should be WPA-PSK WPA2-PSK, which is safe and avoids carelessly letting people crack and rub the network;

7.Click Done, and the router will automatically restart, so just wait patiently.

First of all, a wireless router is a piece of hardware, and depending on the configuration, it is generally around a few hundred yuan. Its role is to convert a wired signal into a wireless signal, so that your Wi-Fi device (iTouch) can use Wi-Fi to surf the Internet. Also, since he is a piece of hardware, he must use a power supply.

Here's how to connect:

Connect the broadband cable to the WAN port of the router, then connect the laptop to the LAN port of the router through the network cable, then enter the IP address at the bottom of the wireless router, enter the username and password marked at the bottom, enter the settings page, generally enter the broadband username and password (PPPoe mode), and then save the settings. If the username or password entered is correct, the computer connected with the network cable can already access the Internet normally, and as long as the router is turned on in the future, other Wi-Fi devices will receive the Wi-Fi signal sent by the wireless router (you need to set it on your device and find it on the Internet), and you can also surf the Internet normally (the broadband cable should be plugged in to the router all the time).

The bedroom network socket can be plugged into the network cable to access the Internet. However, the network cable in each room in the suite, there is a general branch, generally in the information box (weak current box), it is best to install the router here, so that all rooms can be plugged into the network cable to access the Internet. The wireless signal in the bedroom is not good, just install a wireless router in the bedroom.

Hello, the first thing to do is to use a computer to set it up.

It is to set the dial-up method and the password for wireless Internet access.

You don't need to connect to a computer later.

However, it is necessary to connect the network socket.

You can open the cat and the route directly.

You can use wireless Internet access.

If the computer has wifi, you can use a wireless connection (usually a laptop), if there is no wifi, you must connect with a network cable.

No, you can access the Internet with broadband access to the WLAN port, and now laptops generally come with a wireless LAN card, if you are a desktop, you have to buy a wireless network card.

The first time you set it up, you need to connect it to the computer with a network cable, and you can use the wireless Internet after setting it up.