The installer update really went black

Now the black screen crack and the black screen repair software are unified for the purpose = Hanging horse lz be careful This is Microsoft's 20th sunrise update An hour will hack you once lz is waiting But you must not go down now or you will be miserable. Embarrassment.

Also, I advise you to do the system, after doing it, immediately, I have the computer, right-click on the attributes, auto-update, turn off the auto-update, okay, Microsoft won't quietly install the hateful black screen patch on your computer, hoho, and you have to remember to install the 360 safe + 360 guard, the 360 patch will not be miserable, and the black screen patch can be used safely.

It's not impossible.

You can format the C drive, reinstall the pirated XP system, of course, remember to turn off automatic updates, and install an anti-virus program at the same time, in fact, Microsoft's anti-piracy program is a "virus" program.

If that doesn't work, just install the pirated version of Vista, the current black screen is only for XP, so use the pirated Vista to your heart's content.

The last option is to buy a genuine one, if you have the money.

Then do the system, don't use automatic updates. I haven't tried the other methods provided, and I don't know how.

I bought g12 the day before yesterday.,Today I got a root permission.,And then I tried to delete the system program.,The result is too much deletion.。 The screen goes black. But I can pick up the ** monster.

After booting up, press F8 and then let go when the advanced options appear, select "The latest correct configuration", and press enter to repair.

Specific scheme analysis:

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, and if it doesn't work, reinstall the operating system, don't install software, patches, drivers, etc. If there is no problem with the computer, then gradually install drivers, patches, and travel software, and don't install anything that is not suitable for the group.

If the problem is caused by hardware, take out the motherboard battery and power it, plug and unplug the memory, clean the graphics card, and then check whether there is a problem with the hard disk.

System reinstallation refers to the installation of a computer's operating system. When the user misoperates or virus destroys, the important files in the system are damaged resulting in errors or even crashes that cannot be started, and have to be installed; Or by reinstalling the system to achieve system optimization and upgrading.

Cause Analysis]:

Automatic update of temporary files resulted in; The Windows Update service is abnormal.

Easy Steps]:

Close the [Windows Update] service - delete the contents of [C drive Windows Software Distribution Download] - open the [Windows Update] service again.

Solution]:

If you receive the Windows Update error 80070003 while checking for updates, you need to delete the temporary files that Windows uses to identify your computer updates. To delete temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and try checking for Windows Update again.

Black screen glitch caused by computer software malfunction.

For example, software conflicts, improper driver installation, BIOS flashing errors, incorrect CMOS settings, etc. can cause black screen failures. In addition, hardware damage caused by malignant viruses (such as CIH) may cause the appearance of black screen failures. When it comes to this kind of failure, if you can consider the cause of the failure, you can solve the fault and know that the other party will get twice the result with half the effort.

Reinstall the system and update it with third-party software.

Incompatible, or hard disk problems, let's put it this way, if the hard disk has bad sectors, then the computer reads the data, is wrong, and then the fault phenomenon will appear.

If you have been using the software well, one day, after installing a software, the computer begins to malfunction, and it is frequent, then it is the problem of the software you have installed.

It is also possible that your computer has been infected with a virus, and the virus is found in the security software, or the virus is killed in safe mode, and now, there are many kinds of Trojan viruses, which are really difficult to prevent, and some Trojan viruses infect system files, which will lead to system file errors, and then there will be a malfunction.

Poor contact of memory modules, or memory corruption. This problem should be the most faulty phenomenon in the computer, that is, the poor contact of the memory module! There is too much dust in the computer, and this situation is most common in old computers.

What should I do if the black screen is done after the system update? Many friends will encounter a black screen situation in the system update, and the following will explain to you how to deal with the occurrence of such situations.

1First of all, when the user boots into the system, press and hold the power button to turn off, repeat about 3 times, and the advanced recovery interface will appear after powering on.

2Then, click on Troubleshooter - Advanced Options Virtual Limb - Startup Settings - Shirt Wheel Reboot and select the installation mode.

3Next, after the computer enters safe mode, the operation steps for a clean boot are as follows:

4Press "Win+R" to open the "Run" window, enter msconfig and press enter, and the system configuration dialog box will pop up.

5In the "General" tab, click "Selective Startup" and clear the check box above "Load Startup Items". In the Services tab, click Hide all Microsoft services, and then click Disable all.

6Finally, switch to the "Startup" tab and click to open Task Manager - Startup Items - Disable. After the world is saved, you can restart the system.

Reinstall the system with a black screen after the system is updated.

Please refer to the following methods:

Solution 1: Enter safe mode and disable the discrete graphics card driver.

1.Long press the power button to power off;

2.Press the power button to power on;

3.Repeat step 1 2 three times;

4.Confirm if the "Repair" interface appears on the screen, and if so, click "Advanced Repair Options";

5.Click on "Troubleshoot", click on "Advanced Options", click on "Startup Settings", click on "Restart";

6.After the system restarts, press the number 4 corresponding to the "safe mode" to enter the safe mode;

7.After entering the safe mode, press the win logo key + x and click "Device Manager";

8."Display Adapter", right-click on the discrete graphics card AMD or NVIDIA and select Disable;

9.Restart your computer;

10.If that still doesn't solve the problem, force a shutdown three times at startup to enter WinRe, select the Advanced Boot option, and boot to low-resolution mode.

Solution 2: Prohibit online banking drivers.

In safe mode, try to see if there are any drivers under C: Windows System32 Drivers. If you have changed the program, rename the driver and restart your computer.

Solution 3: Enter the motherboard BIOS and turn off the secure boot.

Restart the computer and enter the BIOS; How to enter the BIOS: After restarting the computer, you can enter by pressing the "DEL" key in the lower right corner of the keyboard, and the "F2" key is generally used in notebooks (if the F2 key cannot be entered, you can consult the manufacturer how to enter the BIOS). Go to the BIOS

Find the Secure Boot option, and close it.

Press the up, down, left, and right keys on the keyboard to select each navigation folder, and the SecureBoot option can be found in the "Security" navigation folder.

The "enabled" at the end indicates that SecureBoot is enabled, we press the keyboard down key to jump to this option, and press the enter key.

Then press the up and down keys on the keyboard, check "disabled", which means disable SecureBoot, press the enter key after selection, then press the "F10" key and press the enter key to confirm to save the BIOS configuration.

After that, you need to restart your computer.

It's hard to say, there is still a long time, it is recommended to install a new system, that will come quickly.

What should I do if the desktop of win10 and win7 system cannot load the black screen normally?