Samsung RV415 How to change win7 to XP system! Seek more detailed explanation 10

When switching to two different levels of the system, it is best to format the whole disk, otherwise you will find a lot of leftover files when you install the system. You use the installation disk into the PE mode to format the whole disk, and you can install the system on it. Don't install the overlay directly, because it can't be overwritten.

What does the blue screen prompt? Which one**.

If you are an installation disk:

Restart the computer, set up boot from the disc, put the XP installation disk into the optical drive, and go all the way to ......If you are a so-called ghost disk:

Restart your computer, set up boot from disc, put the disc into the optical drive, and select such as"One-click installation of XP to C drive" and other ......

The installation is complete, reboot OK

Replacing the XP blue screen is mostly a SATA hard drive problem, enter the BIOS and turn off SATA mode, it should be able to complete the installation smoothly, and then turn it back after completion.

I can change it. Why not.

Please leave the Q number!

Yes, you can buy a system disk, and then set your computer's startup item to a CD-ROM drive to boot, and then follow the wizard prompts to go down to the installation, and then change the boot item to a hard disk.

Why replace it?,I also use this machine.,I've used XP and replaced it with win7.,It feels like it's still win7 good.,Some machines are not necessarily easy to use.,Most of the machines just produced in the past two years are win7

I can put it on. Mine is what my colleague pressed on me.

First, check all the drives.

Second, optimize the system.

Three, reinstall.

Fourth, patching.

Samsung notebooks need to use Samsung's special windows system, go to Samsung after-sales to do it. Charges may apply, Samsung's dedicated windows have been modified and optimized.

Hello dear Samsung users:

According to your description:

1.The machine is pre-installed with genuine win7 system.

2.If your machine comes with a genuine system backup, it is recommended that you turn on the computer and press F4 to enter the restore interface, and select restore or complete restore. (Under normal circumstances, it is only necessary to restore the data of the C drive, in order to avoid the loss of important data, it is recommended that you back up the files).

If a non-original system is installed. It is recommended that you try to install the system as follows:

2.Restart the computer and the Samsung screen appears, press the (ESC) key to enter the quick boot boot, select the U disk to boot into Windows PE, use the hard disk tool to format the system disk first, set the main boot partition to the C drive, and use the third-party restore software to restore the image file to the C drive.

After installing the system, please install the software and drivers through Samsung's official website. (Be careful to back up your data).

Samsung knows that we will provide you with high-quality solutions and answer your questions attentively, and hope to get your satisfactory evaluation.

1. Insert the win7 system disk into the computer CD-ROM drive;

2. Press the F12 key when booting up, and select CD *** to start;

3. Click to install now;

4. The point does not get the latest installation update;

5. Check [I accept the license terms] and click Next;

6. Select Custom (Advanced);

7. If you want to install Win7 on the C disk, select the C disk, click Next, and then boot the system to install;

8. After entering the Win7 system, start to uninstall the original Win8 system, if the previous Windows is installed on the C disk, click on the computer on the desktop, select the C disk, and right-click to select the properties;

9. Point disk cleanup;

10. Point to clean up system files, point to OK;

11. Restart the computer to take effect.

According to your description of the computer, the computer has now crashed and cannot enter the system, so you can only reinstall the system.

If your computer system crashes and you want to reinstall your system, there are two ways to reinstall your system.

Reinstalling the system will only change the system in the C drive of the computer, such as the files and things in the D and E and F drives of the computer.

The first is the optical disc mounting system. It is suitable for those who have a good understanding of the BIOS settings of the computer. [Find and enter the option containing the word "BIOS" in the BIOS interface, 1.]“advanced bios features”

2.After going to "Advanced BIOS Features", find the first boot device option with "first", "First boot device".

3."First Boot Device" option, select "CDROM" Enter, after the configuration is set, press the "F10" key on the keyboard to save and exit, then the computer will restart by itself, and the rest is to install the system automatically.

Above are the steps to set up the BIOS boot. Each computer has different BIOS settings, you can refer to it. Once you've learned it, you'll be able to pack the system on disc. 】】

The second is the USB flash drive mounting system. U disk system, you need to make the U disk into a boot disk first, and then from the online ** system, and after decompression, copy the system with GHO to the boot disk that has been done U disk.

2.After watching the tutorial on how to make a USB flash drive, you will use the tray system. Go to the computer store.

Learn how to install the system.

It is suitable for those who have a good understanding of the BIOS settings of the computer. [Find and enter the option containing the word "BIOS" in the BIOS interface, 1.]“advanced bios features”

3.After going to "Advanced BIOS Features", find the first boot device option with "first", "First boot device".

4."First Boot Device" option, select "U disk" to enter, after the configuration is set, press the "F10" key on the keyboard to save and exit, then the computer will restart by itself, and the rest is to install the system automatically.

Above are the steps to set up the BIOS boot. Each computer has different BIOS settings, you can refer to a liquid late. Once you have learned it, you will be able to use the USB flash drive system.

The U disk system is currently the most commonly used by most computer city installers, which is more convenient than the CD-ROM system, and the U disk is easy to carry and small in size. However, for the basic installers, they may not be clear about the whole operation steps, this article introduces the use of the best USB flash drive boot tool, floppy disk, and introduces how to install the 64-bit ultimate system on the USB flash drive.

Prepare materials before installation.

1. Floppy disk pass ultraiso

2. Windows 7 ISO image file.

A USB flash drive above G.

Floppy drive through ultraiso to make windows 7 installation U disk.

1. After preparing the above tools, open the floppy disk pass UltraIso, select "File" and "Open", the open ISO dialog box pops up, and then select the ISO image file of Windows 7. The latest win7 system**.

Recommended for personal use).

2. Select "Start" and "Write Hard Disk Image".

3. Ensure that the files on the USB flash drive have been backed up before writing, otherwise the system will automatically format the USB flash drive before writing.

4. After the system formats the USB flash drive, if you start to burn the Win7 image to the USB flash drive.

Wait until the following process bar is completed,A Winows 7 installation USB flash drive is made,Other systems Windows 8、Windows XP、Vista can be made in this way。

Install Windows 7 on a USB flash drive

Winows7The installation of the U disk is completed,You can use this U disk to install the system,Restart the computer,Enter the BIOS (desktops generally press and hold the "del" key,Notebook press and hold the "F2" key,Maybe the motherboard is different,The way to enter the BIOS is also different,If you don't know, you can check the Internet) Set the U disk as the first start。 The system will be installed automatically, and there may be a few reboots in between. A few truncated locust cracks are omitted in the middle, and users can choose according to their own situation.

If it is a Doudou system**Win7 system is generally free to activate,Or has been automatically activated,Individual users have not automatically activated,You can click on the activation tool that comes with the desktop,You can use it。

Put in the CD, open the SETUP in the CD directly in the computer to overwrite the original system installation.