SKYWORTH 29T60HT into the bus

Skyworth needs to see what movement it is to enter the bus, if it is a 6D78 movement, the entry method is as follows:

Enter: 1. Reduce the volume to zero, press and hold the "Volume —" button on the panel and the "Perpetual Calendar" button on the remote control for 4 seconds at the same time, then let go.

2. Reduce the volume to zero, press and hold the "Volume —" button on the panel and the "Mute" button on the remote control at the same time for 4 seconds and release. Note: After entering method 1, you can adjust the linearity and white balance.

After entering method 2, in addition to linear and white balance adjustments, you can also change the memory address.

Exit: When entering with method 1, you can press the "Perpetual Calendar" key to exit;

When entering with 2 methods, you can press the "Standby" button to exit.

What kind of movement? If it's 6d78, it's the volume down and hold on to the perpetual calendar ...... for 4 seconds

SKYWORTH TV 29T68HT into the bus (i.e. factory mode) method (take 6D90 movement as an example):

1. Start the TV;

2. Point the remote control at the TV, and press the "--" button on the remote control to switch to the three-button input state"--

3. At this time, press and hold the menu key, and press the number key in turn to enter; Start the service function of the machine;

4. In the service state, press the "Menu" button once, and then press the "Channel+" button to enter the factory mode (bus) of the TV;

5. How to adjust the parameters after entering the bus: press the channel + or channel - key to move the cursor to select the items to be adjusted, and then press the volume + or volume - key to modify the value or status of the selected items; After adjustment, press the menu button to return to the entire project menu;

6. How to exit the factory mode: Generally, press the standby button or screen key of the remote control to exit, if it is invalid, it will be directly shut down, powered off, and then powered on and turned on to resume exiting the factory mode and restore the normal TV mode.

Press the "---key" on the remote control to switch to the three-key input state "-- i.e. three digits). Then press and hold the menu key on the remote control, enter 978, and the service function of the unit will be activated. Press the Menu button again and then press Channel to enter the Adjust menu.

When exiting, select Shipment in the adgust menu to exit.

To reduce the volume to 0, press and hold on the panel.

Keep the volume down" button, and then press the "Screen" button of the remote control to enter the bus!

Skyworth 29T83HT method to enter the bus:

1. Start the TV;

2. Operate the remote control of the TV, point the remote control at the TV, press and hold the "Volume Down" button until the volume is 0, do not release this key at this time;

3. At this time, press the "screen display" button on the remote control, and the TV will enter the bus interface, which can view, the basic parameters and information of all aspects of the TV.

If you want to exit the bus interface, you can directly press the "Power" button on the remote control to exit.

SKYWORTH 28T88HT into the bus to adjust the amplitude of the method:

1. Press the source button on the TV remote control to switch the signal source to analog TV (that is, "TV" or "TV" is displayed on the TV screen);

2. Press the menu button in the remote control, and when the menu appears, press the button on the remote control in turn (remember to press the button in the upper right corner of the remote control before input, and switch the touch area to digital input mode);

3. If the input is correct, the project menu of E800A will appear in the upper left corner of the screen.

SKYWORTH 6D95 Movement 6D96 Movement Bus Adjustment Method: Press the " key on the remote control to switch to" while holding down the "Menu" on the panel "Standby" (later channel +) button, use the remote control to enter 777, it will play the service function of the machine, and then in this state, press the "Menu" button once, and then press the "Channel +" button again to enter the factory mode. Select the shipment item in the service menu and press the "Volume +" key to exit the bus.

What data are there, send it to see, if there is a "wid" item, it is the line width. It seems that it has to be adjusted separately at 16:9 and 4:3.

Thank you moderator, which item in the bus is the line amplitude?

Enter the bus:

Press the "Menu" button on the keypad, and then press the number button 978 on the remote control in turn to enter the factory debugging menu, after the adjustment, if you need to check the non-factory menu, you need to press the remote control menu key (menu key) in turn, and the sound mode key (key) to save the content and clear the screen (clear the debugging menu), which is still in the factory mode state at this time; Press the menu and display buttons on the remote control in turn to return to the debugging menu. Shut down the machine under the factory debugging menu, and the power on will automatically enter the factory mode state, otherwise, the power will exit the factory mode after power off.

Reconciliation methods and data:

Press the channel + - button to select the item to be adjusted; Press the volume + - key to change the value or status of the selected item; Press the mute key to turn the page forward, and press the alternate key (to turn the page back).

Exit the bus: Press the remote control menu key and the sound mode key in turn to make the TV in a factory-free menu state, and turn it on after turning off the power.

First, press and hold the menu button on the panel, and then press the number keys 9 7 8 on the remote control in turn to enter the factory commissioning menu.

Computer connected to TV:

1. Choose the best interface that both the computer graphics card and the TV have, such as VGA, S terminal, HDMI, and buy the corresponding cable in the computer city. If the sedan is not connected by VGA, you also need to buy a VGA one-to-two adapter and a male and female adapter, and connect the TV and computer monitor at the same time, otherwise the resolution cannot be adjusted. In addition to HDMI's digital interface, which does not require audio cables, other analog interfaces also need their own dedicated audio cables, which are sold in computer cities and are not expensive.

2. Set the TV signal source to PC mode, computer desktop-properties-settings, click on the No. 2 monitor is the TV, click and hold the resolution scroll bar and move slowly, until the TV shows the picture of the computer desktop, if not, you should also use the advanced - monitor, adjust the refresh rate of the graphics card.

Your TV is a CRT CRT CRT TV, the resolution is very low, it is not clear to connect to the computer, it is meaningless, and the input interface does not necessarily have a special ** interface of the computer, and it is not easy to connect with the book.

Buy a wireless network card, or plug in the network cable directly.