How to adjust the virtual value of the computer and how to open the virtual settings of the computer

Right-click on the "My Computer" icon on the desktop and select the "Properties" option in the right-click menu that appears to open "System Properties".

Window. Click the "Advanced" tab in the window, and a dialog box for advanced settings appears;

Click the "Settings" button in the "Performance" area and select the "Advanced" tab in the "Performance Options" window that appears to open its pair.

Word box. In this dialog box, you can see the area about virtual memory, click the "Change" button to enter the "Virtual Memory" setting window. Choose.

For a partition with a large free capacity, check the box before "Custom Size", fill in the specific values in the "Initial Size" and "Maximum" columns, (the maximum value cannot exceed 2G), then click the "Settings OK" button in turn, and finally restart the computer to make the virtual memory settings take effect.

The above is how to set up virtual memory in Windows XP operating system.

Virtual memory?

Right-click on My Computer, Properties, Advanced tab, click Performance in Settings, Advanced, there is a virtual memory inside, and change it on the line.

Set up virtual memory.

The virtual memory setting method is: right-click on My Computer - Properties - Advanced - Performance Settings - Advanced - Virtual Memory Change - Select the system drive letter in the drive list - Custom size - Set the values in "Initial Size" and "Maximum", then click the "Settings" button, and finally click the "OK" button to exit.

The initial and maximum values are set to the same value).

If the physical memory is 256M, the virtual memory is set to a maximum minimum of 512 512 physical memory of 512M, the virtual memory is set to a maximum and minimum of 1024 1024 Physical memory is 1G, and the virtual memory is set to a maximum and minimum of 2048 2048 If the physical memory is greater than 2G, you do not need to set the virtual memory.

BIOS Virtualization Technology Steps:

To boot into the BIOS, press F1 F2 Del, then enter Security, Virtualization, and select Enable.

After changing the settings, it is recommended to turn off the computer for at least 10 seconds and then restart the machine to ensure that virtualization can be turned on properly. If the motherboard is up-to-date, configuration changes can be detected after boot.

Description: When you need to run some operating system virtualization software and virtual machines, hardware virtualization requires virtualization settings to be enabled. In most cases, operating systems that do not require virtualization technology will work on virtualization-enabled systems, but some operating systems that require this technology must be enabled to run.

For example, if virtualization is not enabled, the message "Windows Virtual PC cannot be started because hardware-assisted virtualization is disabled" will be displayed.

All the latest processors and motherboards support virtualization technology, check if the motherboard manufacturer supports it. When virtualization technology is enabled on the motherboard, the operating system detects it immediately.

Start by enabling and installing the virtual machine in the BIOS settings, and then install the virtual machine under the system.

First, start the virtualization settings under the BIOS:

Intel platform.

1.As soon as the computer is turned on, press the 'Delete' key on the keyboard to enter the BIOS [EZ mode] page.

2.Press the F7 key on the keyboard to enter Advance Mode, as shown in the figure below

If you press the 'Delete' key on the keyboard after powering on the keyboard to enter BIOS Advance Mode, you do not need to press the F7 key on the keyboard).

3.Click on the [Advanced] page and click on the [CPU Configuration] option.

4.Select the [Intel(VMX) Virtualization Technology] option and set it to [Enabled].

5.Press the F10 key on the keyboard, click [OK], save the option, and the BIOS setup will be completed after the computer restarts.

AMD platform.

1.As soon as the computer is turned on, press the 'Delete' key on the keyboard to enter the BIOS [Advanced Mode] page.

2.Click on the [Advanced] page and click on the [CPU Configuration] option.

3.Select the [SVM Mode] option and set it to [Enabled].

4.Press the F10 key on the keyboard, click [OK], save the option, and the BIOS setup will be completed after the computer restarts.

Second, install a virtual machine on the system.

2.Click "Uninstall the program".

3.Click "Enable or Disable Windows Features".

4.Select Hyper-V and click OK

5.Wait until the Hyper-V feature is installed and click [Restart Now].

6.After rebooting the system, click [Start Menu] and select [Windows System Management Tools].

7.Select [Hyper-V Administrator].

8.Right-click Virtual Machine, select New, and then select Virtual Machine

9.Click Next.

10.Set the name and location of the virtual machine, and then click Next.

11.Select the generation of this virtual machine and click Next.

12.After setting the size of the startup memory, click Next.

14.Set the name, location, and size of the virtual disk, and then click Next.

15.Set up a bootable image, click Next.

16.Click Done.

17.Right-click the virtual machine and select Online.

18.Select the language of the installation and click Next.

19.Check the box I accept the license terms and click Next.

20.Select the type of installation.

21.Set the disk size and click Apply.

22.Click OK.

23.Click Next.

24.Wait for installation.

25.After the installation is completed, reboot the virtual machine.

Method 1: 1. After entering the BIOS settings, switch to the "Configuration" option, move the cursor to "Intel Virtual Technology" and press Enter.

2. After opening the options, select "Enabled" and press Enter;

3. At this time, the option will be enabled, press the F10 hotkey to save and exit to enable the VT function.

Method 2: 1. After entering the BIOS settings, switch to the "Advanced" option, select "CPU Setup" and press the Enter key;

2. Then move to "Intel(R)Virtualization Technology", press Enter, set it to "Enabled", and then press F10 to save.

Here's how to turn on your computer's virtualization settings:

When the computer is turned on, press the power button to start the computer, and you can see a black text prompt (or brand logo).

Before the text prompt disappears, press the specific shortcut. Different computer brands may use different shortcuts, but here are a few common situations:

If you're using an HP computer, you can press the F10 button to go to the BIOS settings page, where you can find and turn on virtualization.

If you are using a Lenovo computer, you can press the F1, F2 or Del button to enter the BIOS settings page, where you can find the virtualization feature and turn it on.

If you are using a Dell computer, you can press the F2 or F12 button to enter the BIOS settings page, where you can find the virtualization function and turn it on.

If you are using an ASUS computer, you can press the F2 or Del button to go to the BIOS settings page, where you can find the virtualization feature and turn it on.

Note: These shortcuts may vary slightly depending on the brand of your computer and the version of your operating system, so please try them according to your own computer.

Locate the virtualization option. In the BIOS settings page, find the relevant option such as "Virtualization" or "Virtualization Technology" and turn it on. In general, this option is in the motherboard settings or beam chipset settings.

Save and exit. Once the settings are complete, press the F10 or ESC button to exit the BIOS settings page and select the "Save and Exit" option.

To open your computer's virtualization settings, you need to go into your computer's BIOS system and then enable virtualization technology. The general steps are provided below for reference:

1.Turn off the computer, then press the power button and press F2, Delete, or any other button that appears on the boot screen to prompt you to enter the BIOS.

2.Once you're in the BIOS, use the arrow keys to find the "Advanced" or "Advanced Settings" menu options.

3.Found"virtualization technology"or"intel (vt-x)"(AMD CPUs may be called AMD-V) and similar options.

4.Choose. "enabled"(Enable) option, or change its status from"disabled"Change to"enabled"。

5.Confirm the changes, and save the exit BIOS settings.

6.Once the computer restarts, you can use virtualization software to create and run virtual machines.

It is important to note that the BIOS setup screen name, location, and options may vary depending on the make, model, and performance of the computer, and the specific steps need to be performed on a case-by-case basis. In addition, the compatibility of computer hardware is also important when enabling virtualization functions, if your CPU does not support virtualization technology, you may not be able to use the virtual machine power button.

To open the virtualization settings on your PC, you need to do the following:

1.Enter BIOS settings: Restart the computer and press the corresponding buttons (such as F2, Delete, F10, etc.) when the boot screen appears, and enter the BIOS settings interface.

2.Locate the virtualization options: In the BIOS settings interface, look for options such as "Advanced" or "Advanced Settings" and look for virtualization options such as "Intel Virtualization Technology" or "AMD Secure Virtual Machine".

The exact name may vary depending on the brand and model.

3.Enable Virtualization Options: Use the arrow keys to move the cursor over the virtualization options, press the Enter key, then select enable options such as "Enabled" or "Enable", and finally press F10 to save and exit the BIOS settings interface.

4.Check whether virtualization is enabled: Restart your computer, open the virtualization software (such as VMware Workstation, Virtualbox, etc.), and try to create a virtual machine or run the virtual machine image file to check whether virtualization has been successfully enabled.

It is important to note that on some computers, the virtualization option may be disabled, so you need to check that the hardware supports the virtualization function and that the virtualization option is enabled. If you're not sure how to do this, it's a good idea to check your computer's instruction manual or consult a technical support person first.

To turn on the virtualization settings, you need to follow these steps:

1.First, you need to go into your computer's BIOS settings. You can enter the BIOS settings by pressing the F2, F12, or Del keys while the computer is booting up.

2.Once you are in the BIOS settings, you need to find the virtualization option. This option is usually categorized as "Advanced Settings", "Chip Trace Group Configuration", or similar.

3.Once you have found the virtualization option, you need to turn it on. This option is usually labeled as "Virtualization", "VT-X" or similar.

4.Once you have turned on the virtualization option, you need to save and exit the BIOS settings. You can press the F10 key to save and exit the BIOS settings.

5.Once you have exited the BIOS settings, you need to restart your computer. Now, you have successfully turned on the virtualization settings.

Please note that the above steps may vary depending on the make and model of the computer. If you're not sure how to turn on virtualization settings, refer to your computer's user manual or contact your computer manufacturer for help.