There s always a jam after the recording

Not enough memory! Bad configuration! ~~

Put in the card recorder sometimes the card is as followsWhen the tape recorder is playing or recording, sometimes the tape will be rolled on the main shaft or belt pulley, which is the cassette phenomenon. In the event of such a failure, the machine should be shut down immediately. For the tape wound around the transmission shaft, if the lid can be opened by pressing the open box button, you only need to turn the leading shaft or press the pulley in the opposite direction, and pull the tape out lightly.

If you press the lid of the open box can not be opened, you can not pull it hard, you can first use a tool to loosen the spring with the box compartment, gently open the lid of the box, and then carefully clamp out the winding tape with tweezers, if you can't clamp it out, you have to cut the tape and clamp it out in sections.

Reasons for the occurrence of cassette:

The tape itself is not flexible in core displacement or rotation; The tape is sticky when it is damp; The tape is winded unevenly or too loosely (corrected by re-fast-forward or rewinding).

There is a stain on the main shaft or pressure pulley of the tape recorder (it can be cleaned with a cotton swab dipped in detergent or alcohol).

Faults in the movement system are troubled by professionals.

Improper operation, such as tape fast forward or rewind, immediately after pressing the playback button, because the tape in the previous program has not ended, to enter the next program, the effect of inertia will make the tape roll into the main shaft or pressure pulley, play the operation should pay attention.

The phenomenon you described is too general, you really want to help, send your machine configuration, sound card model, recording software, and microphone model all up, so that you can see if you can solve it, otherwise, no matter how good you are, it will be difficult for you to cook without rice; Well, to put it simply.

1In fact, the problem of synchronization is delay,No matter how good the sound card is, there will be a delay,That's for sure,But a bad sound card,The delay is particularly large,This is not something that can be solved by setting,That kind of sound card is like that。 A good sound card supports ASIO, and the recording delay is very low, so low that you can't feel it, hehe.

2. There are many aspects of noise, the current is not clean, the microphone is not good (the general computer microphone is garbage for recording), the motherboard selected is not good, which may cause noise, 3 sound card, I have not heard the sample sound, I dare not make a judgment, the recording software problem, the sound card problem, or the configuration problem of your machine (such as the hard disk write can not keep up, the CPU occupation is too high. Although the probability is very small, pin Tsai argues).

4. If you want to record well, a good sound card plus a good microphone plus a good recording software. You want to get the recording done with the integrated sound card, which is unrealistic.

5I don't know what you mean by your good sound, but now the computer recording, yes, will not mix (vocal + **), are all used to listen to the wet recording dry method, record the dry sound, and then use professional post-mixing software + professional plug-ins to do post-processing deficit, which can meet your good requirements.

6, please don't ask me what the word means, I'm hand-typed, if you don't understand, and really want to learn to record the mix, this is not asking can help you, you have to go through systematic learning.

Whether your sound card is inherited or independent ruined.

The murmur is mostly bad for the microphone.

If it's a sound card, it may be that the input function is broken, or you need to update the driver of the sound card.

This is simple, and the next recording software is OK

I haven't used a recording software that can be picked up without a microphone, and I asked a friend to introduce me, so I can increase my knowledge!