How much does it cost to change a POLO front light in a Volkswagen 4S store?

200-500 yuan.

The ** of car headlights is related to the model and the type of bulb, and the car headlights generally have halogen lamps, LED lamps, xenon lamps and laser lights, and the most common are halogen lamps and LED lights.

Halogen lamps are relatively cheap, generally used for ordinary models, a 12V55W ordinary specification bulb is about 20 to 50 yuan, and the use of new technology of high brightness, high color temperature bulbs, ** in about 200 yuan, plus the cost of man-hours, replaced down** about 500 yuan.

Precautions for car headlights.

It should be noted that the quality of the bulb in the driving directly affects our driving safety. A high-quality bulb not only has a long service life, but also has the advantages of good stability, sufficient brightness, concentrated focus, long range, etc., and its lighting effect will be much better. And inferior bulbs have a short lifespan and cannot guarantee the stability of lighting.

When driving, especially when overtaking, it is easy to make mistakes and cause traffic accidents. In addition, even if you use *** bulbs, you should pay attention to daily maintenance.

Just as a car needs to change its oil filter regularly, light bulbs are no exception. Under normal circumstances, the light bulb will be damaged after 50,000 kilometers or two years of use. Long-term use of the bulb will dim, the irradiation distance will become shorter, affecting night driving.

At this point, we need to replace the bulb to eliminate the potential driving safety hazards.

I don't know what you said about the bulb or headlight assembly, if it is an assembly, the auto parts city buys more than 300 of the factory, 4S may cost more than 600.

It is recommended to go to 4S to buy, there are a lot of good antagonistic parts in the auto parts city, don't be greedy for small and cheap and suffer big losses, and you don't have the ability to identify 4S.

If it's a light bulb that's easy to do, the original German version of OSRAM costs only 100 yuan.

You personally go for 800

If you go insurance 1200

I suggest that you take the money out of the insurance company and find a place to change it yourself, so that even the working hours are counted as 500 should be enough.

If you need to pull gold and spray paint, you have to add some money For example: the front bumper, I have 180 all down here (including labor hours).

About 600, it's the same everywhere, the difference is in the working hour, the country has the **standard, otherwise how do you think the insurance company evaluates?

Let's get another one in the market! Philips! It's usually only 35 yuan!

There's no need to go to a 4S store for everything! It's black in there1

No. 6QD 941 007 **: I don't know the cost of many!

The bulb inside can be changed separately! Light bulb** It should be a trivial matter that will not cost man-hours.

Ordinary car lights directly equipped with xenon lamps have severe astigmatism and weak penetration. Even if the other driver's eyes can't be opened by your scattered light in the low beam, you won't feel particularly bright when you sit in the car. Especially on rainy and foggy days, when you look over, the front is white and foggy, and it is easy to hallucinate!

This is because the normal lamp cup is only designed for halogen bulbs and does not match the xenon bulbs. When the xenon lamp is installed directly, it causes severe astigmatism. Like the H4 light, that's it.

This kind of vehicle must be upgraded, and the final solution is to transplant the dual lenses in the Mercedes-Benz BMW into the headlights of our Luyin without changing any circuit of the original car, so as to fundamentally solve the problem of spotlights and brightness, and truly illuminate themselves and respect each other.

What value do lenses bring?

1.Because the lens has a strong ability to focus light, it is used to illuminate the road, which is not only bright but also clear.

2.Because the light dispersion is small, it has a longer and clearer light range than ordinary halogen lamps. So you can see things in the distance for the first time and avoid crossing or missing the target.

3.Compared with the headlights of the traditional lampholders, the headlights of the lens lamps have uniform brightness and strong penetration, so they have strong penetration in rainy or foggy days. Therefore, oncoming vehicles can receive light information as soon as possible to avoid accidents.

4: The life of the HID bulb in the lens is 8 to 10 times longer than that of ordinary bulbs, which reduces the unnecessary trouble caused by changing the lamp all the time.

5.Lens hernia lamps do not need to be equipped with any power supply system, because real HID gas discharge lamps only need a voltage regulator, 12V voltage, and then convert the voltage to normal voltage, xenon lamp bulbs can be powered to shine stably and continuously, so that power can be saved.

All Polo headlights not only have a rich texture in geometric shapes, but also adopt the popular blackening treatment, and are equipped with slender eyebrows, which make the "eye" deep front look sharper.

The steps to replace the Polo headlights are as follows:

1.Open the engine compartment cover, observe the layout of the car parts on the back of the headlights, and if the space is insufficient, then go to a professional "4S" shop to replace it. Determine the headlight model of the POLO, and pay attention to the headlight identification model under the outer glass of the headlight.

2.Unscrew the headlight cover, noting that there are subtle differences in how to remove the headlight cover, depending on the model.

3.Forcefully unplug the lamp holder with the power cord, and pay attention to holding the lamp with your hand to avoid damage when unplugging.

4.Loosen the lampholder circlip to remove the lamp and replace it with a new bulb. The process of assembly and recovery is in reverse order of disassembly, which will not be repeated here. Note that when reinstalling the dust cover, be sure to put on the papa to avoid rain and dust infestation on the headlights.

A1After opening the hood, in the internal test of the two headlights, there is an iron hook, on the back of the headlight, there is a plastic screw used to lock the headlight, unscrew the two plastic screws behind the headlight, store it, and then pull the iron hook outward to the end, and the headlight will naturally come out.

2.After the headlight is unloaded, you will find that the back is dragged by the wiring harness of the headlight, and the headlight wiring harness is fixed by the card, and you can touch the bottom of the joint with your hand.

3.After removing the headlights, observe the base of the headlights and their specific methods, the fixed guide rail in the middle is used to slide in or out of the headlights, and the iron hook on the right is.

4.After unplugging the wiring harness, the headlights of the car are always down.

1.After opening the hood, in the internal test of the two headlights, there is an iron hook, on the back of the headlight, there is a plastic screw used to lock the headlight, unscrew the two plastic screws behind the headlight, store it, and then pull the iron hook outward to the end, and the headlight will naturally come out.

2.After the headlight is unloaded, you will find that the back is dragged by the wiring harness of the headlight, and the headlight wiring harness is fixed by the card, and you can touch the bottom of the joint with your hand.

3.After removing the headlights, observe the base of the headlights and their specific methods, the fixed guide rail in the middle is used to slide in or out of the headlights, and the iron hook on the right is.

4.After unplugging the wiring harness, the headlights of the car are always down.

Question grows into a c30

Grows into C30

How can it be opened quickly.

How can it be opened quickly.

A1Disassemble the headlight assembly, the headlight assembly is generally buckle or screw fixing, the headlight can be removed after the buckle is pulled out or the screw is removed, and attention should be paid to protecting the wiring harness on the headlamp when dismantling;

2.Use a heat gun to heat the area around the lampshade, soften the lampshade fixing glue, and then slowly pry the lampshade open.

Remove the headlight socket first.

Then dismantle the middle net.

Finally, remove the screws.

Volkswagen polo headlight removal steps: open the engine cover, determine the model of the headlight, unscrew the lampshade, then unplug the lamp holder of the power cord, release the circlip of the lamp holder to take out the lamp, and then reinstall the new bulb.

The removal and replacement of the Polo headlamp is as follows:

1.Open the hood and observe the layout of the car parts on the back of the headlights. If there is not enough space to be empty, go to a professional "4S" shop for a replacement. Determine the model of the Polo's Dachadan lamp, and pay attention to the identification model of the lower part of the outer glass of the headlight.

2.Unscrew the lampshade. Note: Due to different models, the method of removing the lampshade is slightly different.

3.Unplug the lamp holder with the power cord and hold the lamp with your hand to avoid damage.

4.Loosen the circlip of the lamp holder to remove the lamp and reinstall the new bulb. The reassembly process is reversed from the order of disassembly, which is not repeated here. Take care to reinstall the dust cover so that rain and dust do not disturb the headlights.

Modification of the balance mode:

Boost Strength or Spotlight: This method costs less to defeat the big scramble, but has a limited effect. Replace the 50W headlight with 100W, and the brightness will not simply double, but only increase a little bit.

Due to the mismatch between the circuit and the 100-watt bulb, the line loss will increase accordingly, and the voltage at both ends of the headlight will drop, increasing the line load and burying the hidden danger of accidents.

Purpose of lighting: Lighting is the introduction of two thicker wires, which can be switched on and off by a relay between the headlight and the battery. The principle of lighting is to reduce the voltage loss of the line, so that the actual battery voltage applied to the voltage applied to both ends of the headlight is basically close, so there is a slight lighting effect, but the brightness of the headlight will change with the change of engine speed, which is more obvious for cars with aging lines.

Volkswagen's new Polo brake bulb model is: P21 5W12V double filament high and low feet. New polo to replace the brake light: first prepare tools, a brush, a flathead screwdriver.

There is a hook and loop on the inside of the trunk corresponding to the taillights, which is torn open and the white screws in the picture are unscrewed.

Circled in the picture is a clip connecting the headlights to the body. When removing the headlights, pay attention to one is to use your fingers to push the lights out from the inside. The other is not to push too hard, as there is also a wiring harness connection.

Unplug the wire-speed plug and remove the lamp as a whole. There is a clip at each of the four red circles, and the flat-blade screwdriver is warped and disengaged. Take out the old bulb and put the new bulb on, just press it down a little harder, and then gently turn the bulb to get stuck.

In the order in which it was dismantled, it was restored.

Notes:1Remove the plastic clip of the tail box interior modification board, remember to pry up the small round cover in the middle with a flathead screwdriver, which is separated from the entire plastic clip, which plays the role of supporting and fastening, after it is loosened, the whole plastic clip is good to take 2

After uncovering the interior cover, there is a nut cover that can be rotated by hand at the top and bottom of the taillights, and the whole lampshade is loosened and can be taken down from the outside.

How to replace the headlights of the polo car: 1. Turn off the car; 2. Unplug the power socket of the bulb; 3. Remove the waterproof cover behind the bulb; 4. Take out the bulb from the reflector, the bulb is generally fixed by a steel wire circlip, and some models of bulbs also have a plastic base; 5. Put the new bulb into the reflector, align it with the fixed clamp position of the bulb, pinch the wire circlip on both sides and push it in, and fix the new bulb in the reflector; 6. Re-cover the waterproof cover and plug in the light bulb electric spring sedan car source.

Increasing power or spotlights: This is a less expensive option, but has limited results. Replace the 50W headlights with 100W, and the brightness will not simply double, but only increase a little.

Due to the mismatch between the circuit and the use of 100W bulbs, the loss of the line will increase accordingly, and the voltage at both ends of the headlight will drop, resulting in an increase in the line load and burying the hidden danger of accidents.

LED headlights do not need to be modified, and there are extension cords or plugs with the same number of claws as halogen lamps, which do not need to be destructively modified, but because LEDs have a certain amount of heat, many LED bulbs take away heat sinks or cooling fans, so it is necessary to replace the headlight dust cover of the special model Bi Xian equipped with LEDs, and the others are basically no different from halogen lamps.

1.First, the vehicle should be turned off for more than 5 minutes and the car key should be removed.

2.Wait for the engine to cool down completely, and then open the engine compartment cover to avoid burning yourself with the parts.

3.After opening the bonnet, the Kosen beam is visible to the dust cover behind the headlight assembly, 4Most of the dust covers are made of rubber, which can be unscrewed directly in the direction of the screw (some models can be cut off directly), and it does not require too much effort.

Photo by Q&A) @2019