Is AMD X2 4000 70 degrees normal

Abnormal computer equipped at the end of January.

As the weather warms up, the CPU fan gets louder and louder, and the computer freezes or restarts! My CPU is AMD9500 and the temperature is in the 60s, so I bought an ASUS heat pipe heatsink and there is no problem!

Your problem is either a number reading error, or it's true, and if it's true then hurry up and change the radiator! AMD's original heat dissipation is not good!

It's hot enough to check whether the CPU fan fits the CPU, and whether the power supply is a bottleneck for the host If you are overclocked, restore the BIOS factory preset, so that you can live for a few more years, brother

It's high. It's not normal, playing games at about 60 degrees, and it's normal to surf the Internet at about 50 degrees. (refers to summer, without air conditioning).

It's so abnormal, I'm between 40-50, 24 hours a day, I guess your fan is not good, change it, the fan on 4000+ is not expensive.

If there is a problem with the fan, change it to a new one, the fan will be constantly updated, you will use it for a lifetime, and the manufacturers will not all go out of business.

Your fan may be faulty! It should be that the speed is not enough! Let's change the fan! It's almost less than 100 yuan, which is better than a CPU burning out!

Mine at the maximum of thirty or forty degrees, you're overclocking...

The problem with the fan, the difference between the CPU temperature and the core temperature is so large, it should be that the fan and the CPU are not in good contact.

It's a power issue! Mine is just this problem, just change the power supply! Same CPU! My hard drive is 80g! The temperature is absolutely normal! Mine is generally 56 degrees right now!

Abnormal!! Because it's dead!!

The CPU temperature is about 30 degrees higher than the room temperature, which is normal!!

Let's see if your fan is spinning!!

The following quotes! Your CPU temperature is high, this is related to the motherboard, radiator, and the environment in the case, change to a better radiator, if it is a small case, it is best to use a case fan, the new CD generally says that the temperature will not be very high, about 40 normal Your CPU temperature is high, this is related to the motherboard, radiator, and the environment in the case, change to a better radiator, if it is a small case, it is best to use a case fan, the new CD generally says that the temperature will not be very high, 40 or so normal Your CPU temperature is high, which is related to the motherboard, radiator, The environment in the case is related, change a better radiator, if it is a small case, it is best to use a case fan, the new CD generally says that the temperature will not be very high, about 40 normal your CPU temperature is high, this is related to the motherboard, radiator, the environment in the case, change a better radiator, if it is a small case, it is best to use a case fan, the new CD generally says that the temperature will not be very high, about 40 normal your CPU temperature is high, this is related to the motherboard, radiator, the environment in the chassis, change a better radiator, If it is a small case, it is best to use a case fan, the new CD generally says that the temperature will not be very high, about 40 is normal, your CPU temperature is high, this is related to the motherboard, radiator, and the environment in the case, change to a better radiator, if it is a small case, it is best to use a case fan, the new CD generally says that the temperature will not be very high, and about 40 is normal.

High temperature crash.

If the high temperature protection of the CPU is enabled in the BIOS.

Turn this off and take a look, as it could be a temperature-sensing chip.

If the high temperature is falsely reported, if it still crashes, it may be that the motherboard is broken.

Causes the CPU temperature to be too high.

2.The power of the power supply is insufficient.

Replace the power supply.

Soft before hard Troubleshoot software issues first.

Then replace the CPU heatsink and power supply one by one.

If you change the graphics card, you must change the power supply, according to your configuration and the purpose of your computer, you don't need to change the rest.

Your power supply is estimated to not have a 6pin graphics card power supply port, and a 250W power supply may be able to drag a 6750 graphics card.

But working long hours is risky

If your external ambient temperature is 40 degrees, it will reach this temperature after a while, but if this is not the case, it is recommended that you get the fan.

How long has it been used, if it is a new one, it is not normal, if it has been used for a while, the ash of the cooling fan may be too much.

1 All HT multiples in the BIOS should be normal should be Auto you click on it should have a choice of 3x or 4x can, and then you have to lock the voltage and frequency doubling of the CPU (several kilohertz that) to the highest one, in the CPU that voltage frequency symbol you should know, and then adjust the CPU external frequency should be the digital display 200 that, don't adjust it too big 10 10 can get it, if you are not pursuing the limit of overclocking memory, you can ignore him, just find the feeling of heartbeat, But note that there is a place where the CPU voltage is also shown to be 0Don't move a few of that, it'll burn the CPU if it's high, and if you don't move it, there's basically no problem; Rest assured that it can't be broken, if you can't turn on the machine, take down the battery on the motherboard, unplug the power supply, press the start switch to discharge, and then pull out the battery and put it on after a while, if there is no battery, you need to short-circuit the point, this I don't know if you can find three small claws One risk Generally on the lower edge of the motherboard, just three needles for example, three needles are 123, risk on 23, the way to short circuit is to put it on 12, and then put it back, remember to unplug the power supply, so that there will be no danger,, look at the online tutorial to get,If you don't adjust the voltage, it can't be broken.,It's not as terrible as they say.,The screen is black and it's restored according to the method I'll tell you later.。

Set it in the BIOS, and adjust the external frequency to increase it little by little. It's best not to move the frequency doubling, multiply the frequency by the outer frequency and the frequency doubling is your main frequency. Because you are a newbie, try not to add voltage. Take a look at this link that might be useful to you.