How many degrees is normal for a computer motherboard bridge soup hand??

Northbridge High Fever is normal because he is loaded with all the data communication between IO devices, memory, and CPU. However, the temperature should not exceed 55 degrees Celsius. Otherwise, the accumulated heat will affect the work of the transformer chip, transistor or FET near the north bridge of the PCB board (that is, the motherboard), and it is easy to burn the board.

There are several reasons for this:1The internal capacitor is short-circuited, and the local line current is large, which increases the work done.

2.The radiator heat dissipation paste solidifies. 3.

A non-original driver is installed, which does not match the working logic of the bridge chip. 4.The power supply voltage is abnormal.

5.The bridge chip itself is worn out.

Solution: Theoretically, the higher the heat, the shorter the life of electronic components, in order to reduce the heat, it is recommended to add an auxiliary fan on the premise of confirming that the thermal paste does not solidify and is completely removed to the surface of the bridge chip.

As for the existence of other possibilities, there is no need to cultivate them. Even if you go to repair it, the wear and tear of the entire board is here, and there is no guarantee that it will be able to be used stably for a long time after repair.

I've met a buddy with the same problem as me before.,I'll tell you my method.,Solve it perfectly.。

The northbridge heatsink is generally hot, because the northbridge chip is the chip closest to the CPU on the motherboard, which is mainly due to the fact that the communication between the northbridge chip and the processor is the closest, and the transmission distance is shortened in order to improve the communication performance. Because the data processing capacity of the northbridge chip is very large, and the heat generation is getting larger and larger, the current northbridge chip is covered with a heat sink to strengthen the heat dissipation of the northbridge chip, and the northbridge chip of some motherboards will also cooperate with the fan to dissipate heat.

Above is the reason, below I will tell you how I solved it.

1. Disassemble the side cover on the back of the motherboard, carefully remove the heat sink, you will find that the silicone grease on the heat sink is dry, remove it, replace it with new silicone grease, and buckle the heat sink as it is after wiping it off.

2. If you are not satisfied with the temperature, then you can find a small cooling fan with a diameter of 4 cm, tie it to the heat sink or fix it with screws, so that your north bridge will definitely not be hot, but to be honest, the noise of the small fan is a bit strong.

The motherboard is mainly a northbridge chip with a high heat generation, and the power consumption of the northbridge is generally tens of watts, but it is not high, and the normal working temperature of the motherboard is between 30 and 60 degrees.

No more than 70 degrees Celsius is fine, it should be considered normal, and some reach 90 degrees are fine, but dangerous.

The temperature of the CPU, the general 35--50 degrees is normal, and the 70 degrees can be used normally, but the temperature is definitely on the high side, it is recommended to clean the chassis and CPU fan, and replace the silicon paste.

CPU temperature: 45-65 or lower under normal conditions.

If it is higher than 75-80, check whether the thermal grease between the CPU and the fan fails, replace the CPU fan or dust the fan.

Motherboard temperature: around 40-60 (or lower) under normal conditions.

Depending on the motherboard brand and chipset, a price higher than 70 may be considered to add a case fan or open the case.

Hard disk temperature: Under normal circumstances, it is about 40-50, and more than 50 is considered high temperature.

The temperature of the computer motherboard is related to the chipset of the motherboard, the normal temperature of the CPU + motherboard should be about 40 degrees, and the temperature of the motherboard is generally normal in summer when the temperature of the motherboard is below 60 degrees, but due to the constant work or playing large games, the motherboard can also be considered normal below 80 degrees. However, if the temperature of the motherboard exceeds 60 degrees Celsius in the winter or if you don't use any large software or games, you should check it carefully.

However, due to regular work or playing large games, the motherboard can be considered normal when it is below 80 degrees. However, if it is in winter or if you don't use any large software, games, etc., you may want to consider whether the temperature of the motherboard is too high. With the continuous development of science and technology, the temperature that the current motherboard can generally withstand can reach 110 degrees, but the motherboard works at high temperature for a long time, which will reduce the life of the motherboard and chipset.

Therefore, when we are working on the computer, the temperature of the motherboard should not exceed 80 degrees, and when this temperature is reached, it is necessary to dissipate heat for the motherboard of the computer.

Generally, when not playing games, it is normal for the CPU to be below 40 degrees, the graphics card to be below 40 degrees, the hard disk to be around 30 degrees, and the motherboard to be around 30 degrees, and the fan speed varies from individual to individual. If it is a large 3D game, the CPU and graphics card can reach 70 degrees or even higher, the hard disk is around 50 degrees, if the hard disk exceeds 70 degrees, there will be a risk of data loss and hard disk damage. It is recommended to use Game Plus, which can display the temperature, frequency, occupancy, and fan speed in real time on both the desktop and in the game.

If the temperature is too high, another way is to install one or more air ducts to improve the heat island effect.

What CPU can judge how much temperature is normal, for example, the temperature of the Pentium D is higher than that of the Core.

It is also possible that the system detection software does not match the data provided by the motherboard, you can try it with another detection software, I also have the same experience, change the software to detect, and immediately display it as a normal 20-40 degrees, which is not much different from the actual measurement of the thermometer, a few degrees. Looking at the detection data of the BIOS, it is the most reliable.

I'm dizzy My motherboard temperature is 52 degrees as soon as I turn it on.

Abnormal. It's okay that the motherboard temperature is so high. 35-50 is normal.

The temperature of the motherboard,It refers to the temperature of the North Bridge,In summer, it is generally about 40 degrees normal 70 degrees is obviously a bit high,If necessary, change a North Bridge radiator Look at my machine,When the CPU temperature is 57,The temperature of the motherboard is only 24 degrees My is an integrated graphics card,The integrated graphics card is in the North Bridge chip,When the temperature was high in the summer,The graphics card frequently stopped working,That's all because of poor heat dissipation Later, I changed a Kyushu Fengshen's North Bridge radiator,There is also a high-speed small fan on it,The speed reaches more than 4,000 rpm In this way, the temperature of the motherboard is much lower, and this northbridge radiator is bought at 24 yuan online

This should be the temperature of the CPU, the general 35--50 degrees is normal, and 70 degrees can be used normally, but the temperature is definitely on the high side, it is recommended to clean up the chassis and CPU fan, and replace the silicon paste.

Long-term use of the CPU generally should not exceed 65 degrees, but the limit temperature seems to be 90 degrees (different CPU limit temperatures are different), the hard disk should not exceed 55 degrees, the hard disk is easy to be damaged in a high temperature state for a long time, the motherboard is generally the north and south bridge heat is relatively large, and the same as the CPU should not exceed 65 degrees, the temperature of the chassis should not exceed 40 degrees in summer, the limit temperature of the graphics card is relatively different from different models, the heat resistance of the newer is better, the limit seems to be 120 degrees, Usually it doesn't exceed 75 degrees, and older low-end graphics cards don't generate much heat, and some even have less than the CPU, so it's okay to use a fan.

1.If you don't play any big games, it's normal to have more than 50-70 degrees, and if you play big games, it's basically 8 or 90 degrees.

2.It depends on the environment you're in, and if you're in an air-conditioned room, the temperature isn't going to be that high, and you can choose a cooling base, which can effectively cool it down.

3.It's likely to be related to the hot weather, and your own heat dissipation should not be too good, and the heat dissipation is not good, and the weather is hot, and it is entirely possible to crash or blue screen

And it is recommended that LZ do not leave the machine on for too long, otherwise it is easy to crash due to heat dissipation problems, if this situation still keeps occurring, it is recommended that LZ buy a cooling base, I hope LZ can be satisfied with my answer, if you have any questions, you can continue to contact me, hehe.

The temperature of the motherboard seems to be that the software does not detect the motherboard.

Add a fan on the motherboard bridge, and it will age faster at 68 degrees. The bridge is the one with the heat sink, and the display temperature is the temperature of the bridge.

It's a very normal motherboard temperature, there will be no problems, it mainly depends on the CPU temperature, dust will affect the CPU fan heat dissipation, causing the CPU to overheat and restart, and the master is not very accurate.

More than 50 degrees is normal, games and other times are at 60, when 90 degrees will appear stuck.

Normal 30-45 degrees is the most normal.

It is normal for the Northbridge chip to heat up, and the Northbridge chip is responsible for the data exchange management of CPU and memory.

The following approach is recommended:

1. Add a 4mm fan to the north bridge heat sink.

2. Let the wind from the CPU fan blow to the north bridge.

3. Replace the northbridge radiator with a special radiator with a fan.

4. Install a fan inside the chassis to reduce the temperature.

Normal phenomenon, because some motherboards now use a single chipset (the combination of the north and south bridges), and the CPU has controlled the memory for the north bridge, does your chip not have a cooling fan? There should be two! The chip has a CPU, otherwise the life of that chip will be shortened!

Play less big games, open ** or open any software don't open too much, just open the more you open the motherboard, the greater the workload of the motherboard, and the chip will be very hot! Take the motherboard and ask the maintenance staff to see if you can add a cooling fan to the chip! Good luck!

The North Bridge is very hot.

Motherboards with high workmanship have heatsinks on them.

The NF4 series is even more luxurious and large fans (the north and south bridges are together), I have seen a lot of you in this situation, as long as it does not affect the normal use.

No problem.

It's best to buy your own heatsink and get it.

I'm very clear that the North Bridge doesn't burn at 60 degrees.

In particular, 970 990 990fx 870 890fx chips are very common in the northbridge iron.

After all, the northbridge is passive heat dissipation, and if you add the northbridge fan indiscriminately, the motherboard will not be warranted.

I know that the hunger I use is 970 chips Beiqiao is hot in winter, but there has never been a problem.

Northbridge Southbridge 970 870 series chips contain 990x 990fx chips Northbridge 60 degrees -70 degrees is not affected. Definitely not burned.

However, if you are afraid of the temperature, you can install a fan on the side panel to blow the North Bridge heat sink directly, so that the passive will be changed to active heat dissipation, and the temperature can be controlled at about 40 degrees. I just added a side fan to blow directly on the north bridge. The temperature is much lower.