The Apple mobile phone does not have up and down left and right buttons, how to type up and down, le

Hello, according to your question, mine is:

You can tap the location you want to modify with your finger, because the iPhone comes with a touch screen, and the tap of your finger will trigger it to run.

You can use the space and press enter on the keyboard of your phone to make up, down, left, right, and new lines, and modifications.

On your phone's screen, tap the space bar of the virtual keyboard and press Enter.

How does iPhone input method wrap lines?

All have the word word newline.

If you use Pinyin input method, there is a line break key in the lower right corner.

If you enter English, it is the return key next to space.

If you use handwriting, the input method is the line break key below the space.

Solution to phone can't type after factory reset:

Go to set the language and input method,Select the input method again,Try to see if it's normal!

If none of the above methods work, it is recommended to restore the factory settings again and try it, and follow the first step after the recovery is successful.

Try the first step.

If none of the above works, you can only reflash the system to see if there is any improvement. Back up the data in the mobile phone and double clear the mobile phone before flashing, this method is suitable for people who have experience in flashing, do not brush indiscriminately if you don't understand, it is easy to cause the situation that the phone cannot be turned on.

These are the problems that can occur with touchscreen (virtual keyboard) phones (physical keyboards don't), and it's not just iPhones. Generally, it is a software failure, and when the number of words is too much, the input box cannot be scrolled, resulting in the keyboard covering the input box, and the font to be entered cannot be seen, and it cannot be modified. When encountering this kind of problem, I generally take the exit of the keyboard first, then scroll the input box, click on the place to modify, pop up the keyboard again, perform "blind typing", exit the keyboard again, and view.

Sometimes it works, sometimes it doesn't, and it's very troublesome.

The input method has a carriage enter (line break) key,If the previous content is wrong to modify,Please use the touch screen to click there。

Press and hold near the character you want to modify,A magnifying glass will appear.,Just move the cursor over and delete it.。。

In the bottom right corner of the keyboard, Sun Qi can see a "line break" or "enter" button. You can click this button to switch to the next line after you have finished typing. 2.

Use the line break key: On the keyboard of the Apple phone, there is a hidden symbol keyboard. If you need to enter special symbols, such as underlining, horizontal lines, etc., you can press and hold the symbol key on the keyboard to open the symbol keyboard.

On the symbol keyboard, you can find a "line break" key, which you can tap to move on to the next line. Hope this information is helpful to you.

1. Take iphone7 as an example, open the phone QQ, as shown in the figure below

2. After typing the first line of words in the chat window, touch the text input box, as shown in the figure below

3. In the pop-up menu, select "Line Break", as shown in the following figure

4. The cursor automatically wraps to the second line, and the second line can be typed, as shown in the figure below

5. If you feel that the input box is too narrow, you can also touch the input box and select "Full Screen Input", as shown in the figure below

You can wrap lines as follows:

2. Sogou input method.

3.Switch to Sogou input method to wrap.

There is a line break at the bottom right of the input method interface.,Press it to change to the next line.。

How do I switch to the next line when typing on my iPhone? It looks more aesthetically pleasing.

The user needs to keep holding down the space bar until it can't be pressed, and then enter it to wrap the line, or directly voice input to wrap the line, it's OK, take Apple 11 as an example, the steps are as follows:

1. Open the input method of the mobile phone, and you can see that the cursor is at the front.

2. Keep pressing the spacebar until you can't move it.

3. If you enter the text again, it will be automatically entered in the next line.

4. Or click on the microphone below.

5. Voice input line wrapping, which can also be realized.

Tool: iPhone 12.

Operating system: iOS.

Set up. Method 1: Apple mobile phones do not have a line break key in the typing interface key, and you can use spaces to wrap lines.

1. Enter the text you want to enter first, and then press the spacebar several times until the cursor moves to the far right of the interface.

2. After that, then enter the text in the ascension, and then you can see that the text is on two different lines.

1. First of all, open the memo that comes with the mobile phone, and the keyboard in the memo has a line break function, and enter the text you want to enter in it.

2. After that, select the text and click Copy.

Hello,The Apple mobile phone system comes with the input method is that there is no separate line break key,You can press and hold the text input box,And then click "Line break"。 In addition, there are the following ways to change the next line by typing on the Apple mobile phone: 1. Press the spacebar many times to move the cursor to the far right, and then enter the text before opening the door to wrap the line.

2. When you need to wrap a line, click the microphone icon on the keyboard and say "wrap" with your voice. 3. In the memo usage scenario, there is a "line break" option in the input method, which can be copied to achieve line breaking. 4、You can also use other third-party input methods in the App Store**Third-party input method,Third-party input method click on the position in the lower right corner of the keyboard to wrap lines。

<>2. After that, click on the box below.

3. After entering, Zhaoqing enters the text content that needs to be sent, and long-press the input box.

4. After long pressing, select the option of line wrapping at the top.

5. After clicking, you can wrap the line. After the line break, enter other text and click send.

This is the most straightforward way to wrap a line, and you can do it by pressing the Enter key in the bottom right corner at the end of the screen virtual lead keyboard. If you don't see the Enter key in the on-screen keyboard, you can use the keyboard settings to make it appear. 2.

3.Enter Line Breaks: Enter them where you want to wrap your line"↵"symbol, which will be automatically converted into a line break to achieve manual control of line break.

But the method needs to be memorized and bumped in"↵"is more cumbersome. 4.Enable word wrapping:

In the "Settings - General - Keyboard" option on your iPhone, turn off the "Auto Capitalization" and "Auto Correct" functions, and then set the "Auto Wrap" bad to on. In this way, after the end of line word is entered, the system will automatically move the cursor to the next line, without the need to manually enter enter the enter or drag the cursor to achieve line break.