None of the fax machines could transmit documents

Personally, I think it should be a telecommunication line problem, and you can try to judge it yourself. The method is to see if the weather is bad at the time when the fax cannot be faxed or the day or two before, such as high air humidity, rain, unstable power voltage, etc. If so, it is certainly a telecommunications line problem.

Solution: 1: Keep the line from the telecommunications bureau to the unit as far away from the power line as possible, and check the connection in the middle to ensure that the connection is reliable.

Two: the switch of the telecommunications can not fax when temporarily disconnected, the line directly connected to the switch to a fax machine to try whether it is normal, normal means that the switch has a problem to change to a better point. Hehe, I hope it helps.

This situation of your unit should be the problem of the internal line of the unit, the fax machine itself is not faulty, if the fax machine of the unit is through the use of the switch, the quality of the switch is not good or the signal is not good, the impact on sending and receiving fax is great, (the fax machine is the line generally requires that there can be no switch, can not connect the cat, etc.). It is recommended that you can connect the fax machine to the straight line, that is, the line is directly connected to the line interface of the fax machine after the line enters the room, and the extension is connected from the ext port. Hope it helps!

Like this situation, it will happen many times, it may be that the other party's problem is not good, but you can use another way, like network fax, look at this hi-fax network fax is good, my company has been using, do import and export!!

Turn the machine off and turn it on again.

Click "Clear Fax Machine" to clear the contents of the machine, and re-insert it once to restore the original state.

The other party may not give a signal, busy, no power supply, fax machine paperless and other factors, fax can not be sent out, but also the reason for the unsuccessful sending of the world.

Weak or noisy signal on the phone line is also one of the reasons for the transmission failure, because such a signal does not have much impact on the call, but it has a great impact on the communication data transmission, you can try to change the line.

Check whether the ** line is connected normally, it is best to connect the machine directly to the outside line, do not connect to the extension, because some ** switches are of different quality, and do not necessarily have a telecommunication network access certificate, and the transmission signal is poor, so it affects the quality of fax.

The fax machine is a communication device that uses scanning and photoelectric conversion technology to convert documents, charts, and other static image backshooting images into electrical signals, transmit them to the receiving end, and copy them in the form of records.

This is because the default printer settings are wrong, and it is good to modify the teasing pin, and the method is as follows:

1 In the first step, open the Control Panel.

Then click on the Device and Printer options.

2 Step 2, in the pop-up window, guess the fingercode to see the fax printer, which is a pop-up fax.

3 In the third step, if you don't use the fax, you can delete it. Right-click and select Remove Device.

4 In the last step, on the commonly used printer, right-click and select Set as the default printer.

First, check if the memory is full. If the memory is full, check whether subsequent faxes automatically go to the memory because the recording paper is used up. If so, it should be able to print automatically and clear the memory space after loading; If not, perform Purge All to free up memory.

If the memory is not full but can not be sent and received, it can only be sent to the after-sales maintenance point, because ** can play the description line and the basic call part is no problem, then the problem should be in the scntboard or mainboard.

It is estimated that there is a problem with your ** line connection.

1. Check whether the fax machine on your line is the first connected device, if not, please make adjustments, to ensure that the external line is first connected to the line interface of the fax machine after entering the home. Do not connect devices such as junction boxes or machines that interfere with the sending or receiving of faxes.

3. Detect whether your ** line echo is too large, the noise will be abnormal, if the line quality is not good, it will cause the transmission of fax data signals, the bit error rate is too high.

We cannot receive faxes, so please check the paper. toner, etc. The key is to look at the on-screen prompts. Further diagnosis is being made.

1. You can let others dial and send faxes to see if they are normal, so as to eliminate other people's machine and line problems.

2. You change the machine to ** and manual reception, if someone else's machine is fine, let him call you, try.

3. Make sure that your ** line has not been moved, and the external line is connected, do not connect to the extension, the general extension can only be called** can not fax.

4. You can try to initialize the factory settings.

The above points are referenced, if you have questions, you can ask, thank you!

Find the fax driver in the device and printer, delete it to solve, the specific steps are as follows.

2. Click [View Devices and Printers].

3. Find [Fax], right-click, and click [Delete Device].