How should a vacuum cleaner be maintained? How to maintain the vacuum cleaner

1. Before using the vacuum cleaner, check and clean the dust bag (the dust bag should pay attention to whether it is damaged), whether the dust box or barrel is cleaned, and if there are foreign objects or full, it should be poured out and reused.

2. Check whether the power cord and plug are damaged before use, and wrap the power coil into a bundle and hang it on the hook on the top cover of the machine head after use. During use, it should be noted that continuous use should not be too long, and it should be controlled within 2 hours as much as possible. In order to avoid overheating the motor and affecting the service life of the vacuum cleaner.

3. If you find that the dust is close to full gear or if you find that there is a foreign object blocking the straw during use, you should shut it down immediately and use it after cleaning. When using a vacuum cleaner, try to stay away from water pumps or sources of strong radiation, as any appliance itself will have a certain amount of radiation.

Prevent the machine head from dust, water and moisture. Do not use the motor continuously for more than 2 hours, and you should rest when the motor is hot. Be sure to clean the dust bin and dust bag in time after each use. Dust bags must be dry, never wet dust bags.

The vacuum cleaner should be maintained, I bought a vacuum cleaner some time ago, and after a while, the suction power became smaller, and I thought it was broken, so I searched for the method on the Internet, cleaned it up, and maintained it. The suction power is restored. Vacuum cleaner users must not only use it without maintenance, remember to clean it in time, and do not operate it with load.

Introduction: Nowadays, in some large hotels, shopping malls, supermarkets and other public places have high requirements for hygiene, if you only use household vacuum cleaners, it is difficult to meet the requirements, therefore, with the change of market demand, how to maintain the vacuum cleaner? Let me introduce it to you, welcome to read!

First, clean the vacuum cleaner with clean water, and use a non-corrosive cleaning agent, otherwise it will corrode a certain part of the commercial vacuum cleaner and reduce its service life. When using the vacuum cleaner, you should always check the parts of the vacuum cleaner, and if there is any looseness, you should deal with it in time.

Second, the power cord of the vacuum cleaner should be protected to prevent wear and tear caused by the power cord being used for too long, and for safety reasons, the power cord and plug should be checked regularly to see if they are in good condition.

Third, it should be noted that the usual use of commercial vacuum cleaners should not be too long, preferably two hours or something. Because the vacuum cleaner is used for too long, the body will heat up, and the vacuum cleaner will be damaged.

Fourth, after the vacuum cleaner is used, it is best to keep the vacuum cleaner dry, and it is best to place it in a relatively ventilated environment, so as to avoid the abnormal situation that the machine may bring about by moisture.

Since the vacuum cleaner was launched, more people will choose to use the vacuum cleaner for cleaning, because it is very convenient to collect dust and vacuum, will not pollute the indoor air, and is a very practical small household appliance. So what should a vacuum cleaner do if it is used correctly?

1. Due to the differences in the models and specifications of vacuum cleaners, their structural performance and functional characteristics are also different. Therefore, the purchased vacuum cleaner must be carefully read before use to avoid damage to the vacuum cleaner and endanger personal safety caused by improper use.

2. The vacuum cleaner should be well ventilated, the ambient temperature should not exceed 40, and it should be used in a dry room or similar environment without flammable and corrosive gases in the air.

3. Before use, the hose should be properly connected with the suction port of the shell, and the hose should be tightly connected with the over-long pipe of each section and the suction nozzle at the end of the pipe (such as furniture brushes, gap suction nozzles, floor brushes, etc.). Due to the small number of air inlets in the slot nozzle, the noise is higher when used, and the continuous use time should not be too long.

4. Connect the ground wire to ensure the safety of electricity. The vacuum cleaner should not be used continuously for more than 1 hour at a time to prevent the motor from overheating and burning.

5. When the vacuum cleaner equipped with an automatic winding device is in use, pull out the power cord sufficiently. Use the length, do not pull the power cord over the head, and stop pulling it out if you see a yellow or red mark on the power cord. When the power cord needs to be retracted, it will automatically retract at the push of a button.

6. The vacuum cleaner generally has two switches, one on the housing of the vacuum cleaner and the other on the grip handle of the hose.

7. In ordinary use, you should be careful not to make the vacuum cleaner wet, and you can't operate the machine with wet hands. If there are large pieces of paper, paper balls, plastic sheets or things larger than the diameter of the straw in the cleaned area, they should be eliminated in advance, otherwise it is easy to cause the suction pipe to be blocked.

8. When it is found that there is a lot of garbage in the dust storage cylinder, the dust on the filter should be eliminated while removing the garbage, and a good ventilation channel should be maintained to avoid blocking the filter and causing the suction power not to decrease, the motor to heat up and reduce the service life of the vacuum cleaner.

9. The vacuum cleaner motor is mostly a high-speed motor, and the brush is easy to wear after long-term operation. The average service life of the vacuum cleaner motor can reach 1000 to 1500 hours.

10. After the vacuum cleaner is used, it should be stored in a dry place, if it is placed in an excessively humid place, it will affect the electrical insulation and service life.

<> "Tips for Maintaining Your Vacuum Cleaner."

1. Clean the dirt in the ash storage box (or dust bag).

2. Wipe the vacuum cleaner and accessories clean.

3. Check the fastening parts, and tighten them if they are loose.

4. If the bristles on the dust removal brush are seriously worn, they should be replaced in time.

5. The motor shaft of the vacuum cleaner should be lubricated regularly.

6. If the carbon brush of the vacuum cleaner motor is worn after long-term use, it should be replaced with a new carbon brush.

7. If the sealant ridge in the vacuum cleaner is aging, Yingkai should replace it with a new rubber pad.

8. When not in use, the vacuum cleaner should be stored in a dry and ventilated place.