What happened to the computer 2 and the memory module can t turn on 20

It's not compatible.,Settings.,2 and the same memory can be turned on or 2 with don't know what brand is OK.。

Individual memory incompatibilities may cause sudden system restart, shutdown, etc.

2 broken computers are still open, but only the good one can be used.

Just because you can use it before doesn't mean you can use it all the time (but it's just a small chance) solution:

Take turns trying to see if both are good?

Okay, did you listen to the motherboard?

The grid reloading system is still unstable and incompatible

Try both of them separately, and there is a change of slot, or it should be memory incompatible,

Try the other two slots!

Also, it depends on whether any of them are OK

Try the two memory boxes on another device, and if it's OK, it will mean that your motherboard is wrong.

Don't dual-channel, not memory produced at the same time, it's better not to dual-channel.

1.Confirm that the memory module is fully inserted as shown in the image below.

Error: <>

Correct: <>

2.Check that the motherboard's memory pins or memory slots are not dirty as shown below. If so, clear it and try again.

3.Please make sure that the memory module is a specification or brand supported by the motherboard.

4.Please try according to the [Memory Recommended Settings] in the user manual of your motherboard, as shown below

5.If two or more memories cannot be enabled at the same time, try to check whether the memories can be enabled one by one.

6.If steps 1-5 do not solve your problem, replace the good memory.

1. If only 11 of the memory can be turned on, it means that the other memory is bad.

2. If the two memories can be booted separately, but they cannot be booted together, it means that there is a serious compatibility problem.

3. If both memories can't be turned on, it may be that the memory is broken, or the computer is broken. It can be determined by substitution.

Hello, clean the gold finger of the memory module with an eraser, there may be a state that is not displayed due to poor contact, if the memory module has been used often before, it is just re-inserted, then there are many reasons for contact problems, if it is two of the first to plug in one to try, if it is a new memory module, then consider whether it is compatible, so that it is easier to exclude.

Summary. Hello dear, the memory is not compatible with the motherboard, or the specifications are not right.

Memory-to-memory incompatibility.

Your subsequent memory module must first confirm whether it meets the requirements of the motherboard.

Then test the memory module behind it to see if the machine can boot normally.

If it boots normally, there may be compatibility issues between the two memory roots.

If you can't memory module failure.

It is best to have two memory sticks of the same brand and model, if it is not necessary to keep the external frequency and algebra equal, it is best to have the same number of grains.

What happens if the computer can't turn on when the memory module is inserted?

Hello dear, the memory is not compatible with the motherboard, or the specifications are not right. Memory-to-memory incompatibility. Your subsequent memory module must first confirm whether it meets the requirements of the motherboard.

Then test the memory module behind it to see if the machine can boot normally. If it boots normally, there may be compatibility issues between the two memory roots. If you can't memory module failure.

It is best to have two memory sticks of the same brand and model, if it is not necessary to keep the external frequency and algebra equal, it is best to have the same number of grains.

It's this memory module that I used before.,The computer hasn't been used for a few months.,Today, you can turn on without installing a memory module.,You can't turn on the machine when you install it.。

Hello, dear, the cause of this can be checked from the following two aspects: First, the memory module is not plugged in well or there is dust on the gold finger. Workaround:

The memory is wiped with an alcohol cotton ball for a while. The memory slots are also scrubbed using alcohol cotton balls. After inserting back the original memory module.

Please discharge the motherboard battery before discharging. Alcohol cotton balls, medical. After the power is off, remove the static electricity from the body before operating.

If necessary, the graphics card, graphics card slot are wiped with alcohol cotton balls, and the motherboard battery can be discharged during wiping. Second, the computer cannot be turned on due to incompatibility of memory modulesSolution:1

Test whether the two memories are normal, for example: plug in one memory to see if it is normal, and then change the other memory to see if it is normal, if both are normal, change the two memory slots to see 2If it is determined that the memory module is incompatible through 1, then the only way to replace the incompatible memory module is to buy two identical memory modules.

I only have one memory stick, not two.

Hello dear, the memory is not compatible with the motherboard, or the specifications are not right. Memory-to-memory incompatibility. Your subsequent memory module must first confirm whether it meets the requirements of the motherboard.

Then test the memory module behind it to see if the machine can boot normally. If it boots normally, there may be compatibility issues between the two memory roots. If you can't memory module failure.

It is best to have two memory sticks of the same brand and model, if it is not necessary to keep the external frequency and algebra equal, it is best to have the same number of grains.