In 2010, Bora, the glass main switch can not be lifted, the middle block can be opened or locked, an

The switch wire on the right side has to be broken to see if there is still such a situation, there should be a problem with the switch of the front door. There is also a problem with the control module. Generally, after the battery is cut off or the control unit is powered off, it is easy to cause this, you first match it yourself, close all the doors, and then press the glass switch, hold it down, and wait for the glass to drop to the end and still ,..

Tokayev pointed out that as a sinologist, he has lived in China for eight years and is very familiar with the situation in China. China is a very promising partner with strong economic influence, and Sino-Kazakh cooperation is very successful.

Global Times special correspondent in Russia Yin Xinyu Global Times special correspondent Liu Yupeng] Kazakhstan's Nursultan Nazarbayev made a televised speech on the 19th, announcing his resignation, and his chosen successor is one of his most trusted people - Kasemjomart Kemilevich Tokayev, speaker of the upper house of the Kazakh parliament. Nazarbayev said that from the first days of Kazakhstan's independence, Tokayev began to work beside him. Commenting on his successor, Tokayev, he pointed out that as a sinologist, he had lived in China for eight years and was very familiar with the situation in China.

China is a very promising partner with strong economic influence, and Sino-Kazakh cooperation is very successful.

Global Times special correspondent in Russia Yin Xinyu Global Times special correspondent Liu Yupeng] Kazakhstan's Nursultan Nazarbayev made a televised speech on the 19th, announcing his resignation, and his chosen successor is one of his most trusted people - Kasemjomart Kemilevich Tokayev, speaker of the upper house of the Kazakh parliament. Nazarbayev said that from the first days of Kazakhstan's independence, Tokayev began to work beside him. This is what he said of his successor.

In this case, it may be that the one-button window lifting function is invalid, and the function needs to be re-initialized, and it is recommended to contact the 4S store. The working principle of the key is to lift the key by one-key lifting: the key emits a weak radio wave, and the radio wave signal is received by the car antenna, and the signal is identified by the electronic adjustment unit**, and the response of the opening and closing lock is carried out by the actuator (motor or electromagnetic coil) of the system.

The window glass can't be lifted, the switch is fine, the wiring is fine, the motor is fine, sometimes it can be used, sometimes it can't be used, and when it can't be used, the relay doesn't respond. When I can use it, I press down the gap to rise, and I cannot go down.

Three common fault causes and maintenance methods of automobile glass regulators:

1. Abnormal sound of glass vibration. This indicates that the glass regulator screw may be loose, and the solution is to tighten the regulator screw;

2. The glass regulator is stuck. This failure may be caused by deformation or damage to the glass mud groove and loose fixing screws of the lifter.

Deviation of the installation position of the moving and guide rails or damage to the glass regulator. The maintenance method is mainly to clean and replace the glass mud tank or loosen the glass.

Glass mounting screws to adjust the position of the glass.

3. All glass regulators cannot work. The cause of this failure may be the detachment of the tie wire of the combination switch and the total power supply.

Wire detachment, poor relay contact, damage, or lockout switch poor contact or not closed. The repair method is to overhaul the circuit. Hand.

The principle of stirring the window is that there is a gear in the center of the handlebar, and there is also a curtain of knife-shaped chainrings on the glass lifting linkage mechanism, as long as one turn.

The grip and gear drive the chainring, which will make the glass go up and down a specific track. Nowadays cars are using electric windows, and electric windows only.

However, the crank part is changed to be driven by an electric motor, and the direction of the current is controlled by the switch to change the direction of the motor.

toward, let the glass window rise. One of the most important responsibilities of the glass window in the car is to protect from the wind and rain, so in the glass frame.

There are rubber seals on all sides, so that the glass can be close to the body, to achieve the function of wind and water resistance.

Glass regulator is a lifting device for automobile door and window glass, which is mainly divided into two categories: electric glass regulator and manual glass regulator.

Now the lifting (closing and opening) of many car door and window glass has abandoned the manual lifting and lowering mode of rocker type, and generally change to the electric lifting mode of button type, that is, use electric glass regulator. The electric glass regulator for cars is mostly composed of an electric motor, a reducer, a guide rope, a guide plate, a glass mounting bracket, etc. The general switch is controlled by the driver, the opening and closing of the whole door window glass, and the sub-switch on the handle of each car door is controlled by the occupant respectively, and the operation is very convenient.

Solution: 1, check the circuit diagram, there is a button on the general control to prevent the window lifting, after pressing, the three window glass can not be lifted, simply put, it is to cut off the circuit of the rest of the window glass lifting motor, this button is pressed down, power off, press it again, bounce up, and turn on the power supply.

2. There are too many accumulated sundries and garbage slag, such as small cards stuffed by the car window, etc., resulting in stuck, in this case, you only need to go to the repair shop to remove the car door.

3. When the street ignition switch is closed, the door and window relay is electrocuted and closed, the electric door circuit is connected with the power supply, the combination switch or sub-switch is connected to the "upper" position, the current flows through the door and window motor, and the motor rotates to drive the lifter to make the door and window glass rise; The combination switch or sub-switch is connected with the "down" position, and the current flowing through the door and window motor changes the direction, and the rotation direction of the motor changes, and the lifter drives the door and window glass to fall. When the door and window glass rises or falls to the end point, the disconnect switch is cut off for a period of time and then returned to the connected state.

4. The circuit of the window regulator is aging or short-circuited, resulting in the failure of the buttons.

5. If there is a problem with the lifter itself, this must be replaced, and it is recommended to go to the 4S store to replace it.

Reasons:1deformation or damage to the mud groove of the glass; 2.

The screws fixed by the lifter are loose; 3.The glass regulator was damaged; 4.There is a deviation in the installation position of the guide rail.

The reason for the failure of the Volkswagen key to one-button window lift is that the car's in-car computer has lost the data of the remote key control window. Generally, models above the mid-range will have the function of one-key window lifting, mainly to facilitate the use of drivers and passengers, in order to avoid distraction when the driver opens and closes the window, and improves the safety factor. Volkswagen window one-key lifting failure to restore finger dismantling and recovering method:

1. Press the lifting button 6 times in a row, and release it once each time; 2. After each press, you can see that the window glass will be lowered; 3. When you press it for the sixth time, you will find that the window is automatically raised, which means that the reset is successful; 4. Then press the up button again until the window is completely closed. When using the Volkswagen window, you only need to press the column switch, and when the window is lifted to the desired position, release the button, and the lifting process will stop. A car window lift switch equipped with a one-button window lift will have two positions, and the first button will be in the same position as the common power window.

The second position is to press and release, and the window can be automatically fully opened or closed.

There are many reasons why you can press the button on the vehicle key but you can't raise or lower the window, so let's briefly analyze a few common reasons.

The first reason is that the remote control module on the vehicle key is damaged, so the window will not be raised or lowered even if you press and hold the button. We all know that the principle of using the keys on the key to lift the window is to control the motor of the vehicle through the circuit module inside the key, so as to realize the lifting of the window glass. Many people may think that the module on the car key will not be damaged, but this is not true.

After all, many of us put our car keys together with other keys, and it is very likely that the internal damage of the keys will be caused by frequent bumps. Debate.

The second reason is that the motor that controls the window lifting inside the vehicle is damaged, and the forward and reverse rotation cannot be realized, so the window cannot be raised. In fact, in any case, the lifting of the window ultimately depends on the rotation of the motor to achieve, and once the motor fails, the window must not be able to be lifted. However, it is very simple to detect whether the motor that controls the window lifting is damaged, and you only need to use the mechanical buttons on the door to test whether the window can be lifted normally.

If the windows can be raised and lowered normally, it is not only a problem with the motor. And if the windows can't be raised and lowered normally, then the motor can only be repaired or replaced.

The third reason is the installation of some non-original electronic products, which makes the vehicle's control system disordered. If some non-original electronic control units are added to the vehicle's central control system, it may be that the vehicle's one-button window lifting function is due to the state of lost property, so it is useless to press the button on the car key. At this time, you need to reactivate the function of one-key window lifting according to the instructions of the vehicle manual.

This may be caused by poor contact of some parts of the window, and you should go to a 4S shop for repair and inspection.

It is because the function is invalid, maybe the on-board computer has been initialized, and the key is out of power, you can contact the 4S shop to help you repair it.

It may be that this function of yours is invalid, you can go to the four S store to find them to upgrade, so that you can better use this function.

Hello.. Which door is it? Generally, the possibility of damage to the switch is relatively large.

The left front and right glass are raised and lowered, and they can't be lifted when it's cold.

Question: What is the reason why the windows of FAW-Volkswagen Bora cannot be raised?

1: The mud groove of the glass is deformed or damaged;

2: The screws fixed by the lifter are loose.

3. The glass regulator is damaged, and the installation position of the guide rail is deviated.

Ask what is the cause of the sudden failure of the car window.

Ask why sometimes the voice is wrong when the car is in Qidong.

Question: Well, yes.

Ask questions when you start the east car!The engine is a bit slow.

Is it serious to ask questions?How to deal with it.

Summary. Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

The 2010 new Bora glass regulator failed, the main control did not respond, the central control door lock is good, and the other 3 doors can be lifted separately.

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Hello, the failure of this glass regulator is only the main door of the hand shed is not easy to use, this you can first look at the lack of potatoes under the fault**. Also, pay attention to the hinges of this door, the hinge of the place, where the line is easy to break.

The line is not broken. Are there any glitches**?

Computer malfunction left front body control module.

Then you have to check the main door trembling, the power supply and grounding of this control unit, and this CAN line. Is it that the main door can't be opened and closed to control the other doors? You first check the power supply and grounding of the control unit of the main door. There are two power supplies, one grounded.

Now the left front motor has only one cell wire, the normal live wire, and there is no key to control the electricity.

That is, there is one less power supply. Give me a nameplate, and I'll check the circuit diagram for you.

The brown wire on that leg 4 is grounded. 2 horn of the red and white thing 30 power. Purple and white No. 3 show the lin line, you have to measure whether there is a voltage sail cavity deficit god this lin line. The other 6 wires are controlled to lock the round standby and other lifts.

When there is a skew or difficulty in lifting, it may be because the dust and other dirt in the glass guide groove are too much affected, and the resistance of the car glass increases in the lifting process, the car owner can use a wet towel to reach into the glass guide trough with chopsticks, and wipe it left and right in the guide trough to remove, and constantly take off the towel to wash the dirt cleaned on it, until the dirt in the guide trough is cleaned, and the window glass is not restored to normal after being cleaned.

This can basically rule out the problem of relays or fuses, after all, other windows are fine. In this case, it is recommended not to tinker with it yourself, and it is best to go to the 4S shop for maintenance as soon as possible.

The solution is to turn on the ignition switch, pull the switch up and save, continue to pull the glass for more than 3 seconds after it rises to the top, release the switch and press and hold it immediately, make the glass fall to the bottom and wait for more than 3 seconds, repeat the rising action again, the initialization program is completed, and the window lifting function is restored. This method is effective for most models, and if the restoration is not successful, it needs to be repaired at a regular repair shop.

The characteristics of the glass lifter have two lifting arms, according to the arrangement of the two arms, it is divided into parallel arm lifter and cross arm lifter, compared with the single-arm glass lifter, the double-arm glass lifter itself can ensure that the glass is lifted in parallel, and the lifting force is relatively large. Among them, the cross-arm glass regulator has a large supporting width, so the movement is relatively stable, and it is widely used.

The structure of the parallel arm glass regulator is relatively simple and compact, but due to the small support width and large change of working load, the motion stability is not as good as the former.