Methods to solve high altitude work, precautions and preventive measures for high altitude work

1, Lift ** is more expensive, if it is used frequently, you can consider buying.

2. Aerial work platform ** is very expensive, and it is generally bought by municipal companies.

3. Workers climb up to repair, there are leggings that climb poles, which is relatively easy!

In general, if you have a street lamp power maintenance, you can use an aerial work vehicle or an aerial work platform, which depends on the height of your street lamp maintenance.

Generally, aerial work platforms are cheaper than cars.

The height is different, and the ** of the aerial work platform or work platform is also different.

With a lift, the kind that can reach up to 12m.

The anti-high regret measures and precautions for high-altitude work are as follows.

1. The edge and hole of the high-altitude work site are provided with railings or covers.

2. The scaffolding is erected in accordance with the requirements of the regulations and is frequently inspected and maintained, and the stability is checked before operation.

3. Aerial workers should wear light clothes and soft-soled shoes.

4. There must be a safe passage at the high-altitude work site, and too many objects shall not be stacked in the passage, and the garbage and waste materials shall be cleaned up and transported away in time.

5. Workers at heights above and above the ground must fasten their safety belts, hang them firmly and reliably above, and the height should not be lower than the waist.

6. In case of strong winds above level 6 and bad weather, high-altitude work should be stopped.

7. For operations on light or simple structure roofs, wooden planks should be laid to disperse the early stress so as not to trample on the roof.

8. It is strictly forbidden for people to go up and down with the hanging objects, and the hanging objects are not allowed to climb when they are not stable.

9. It is strictly forbidden to hold objects when walking and climbing at high altitudes.

10. When working vertically, differential protectors and vertical self-locking safety ropes must be used.

11. Clean up the workpieces and scattered items on the scaffold in time.

How to prevent high-altitude falling pro! Hello, I am glad to answer your <> pro 1Strengthen scientific management, clarify job responsibilities, be familiar with operating methods, master technical knowledge, implement operating procedures, correctly use protective equipment, and strengthen daily inspections.

2. Take careful protective measures. In addition to setting up guardrails in dangerous parts, setting up nets, covering shelves, and covering holes, flat nets should also be set up below the operators and check whether the operators use protective equipment correctly. 3.

Set up a professional guardian to supervise at any time! The specific precautionary measures are as follows: 1. Personnel engaged in high-altitude operations must hold a certificate to work, and conscientiously abide by the safety construction regulations, dress flexibly, and prohibit wearing shoes with hard soles and nails that are easy to slip.

2. Personnel engaged in high-altitude work should have a physical examination once a year, and those with heart disease, high blood pressure, mental illness and epilepsy are not allowed to engage in high-altitude work. 3. Protective railings should be set up for high-altitude operations, safety nets and protective doors should be installed, and operators should wear safety belts. 4. The materials for high-altitude operations should be stacked smoothly, and should not be placed on the edge and attached to the hole, and where there is a possibility of falling, it should be withdrawn or fixed in time to prevent falling and injuring people.

5. If there are defects or hidden dangers in safety facilities, they should be reported and dealt with in a timely manner, and if they endanger personal safety, they must stop the construction, and then go to the high-altitude operation after eliminating the danger. 6. No one is allowed to move and remove the safety sign without authorization, and it is necessary to move and remove it after the approval of the foreman due to the needs of the work, and then reinstall it. Extended material: I hope mine can help you <>

Do you have any other questions?

Dear, I'm glad to answer for you: The methods for preventing falling from height are as follows: 1

Strengthen scientific management, clarify job responsibilities, be familiar with operating methods, master technical knowledge, implement operating procedures, correctly use protective equipment, and strengthen daily inspections. 2. Take careful protective measures. In addition to setting up guardrails in dangerous parts, erecting nets, covering shelves, and covering holes, flat nets should also be set up under the operator and check whether the operators are using protective equipment correctly.

3.Set up a professional supervisor to monitor the loss at any time!

1. Aerial workers must wear safety helmets correctly, must fasten safety belts, and hang them in a firm place. Diverted.

2. The quality of scaffolding, hangers, platforms, scaffolding, ladders, guardrails, rigging and other materials and safety belts, safety nets and other safety protection equipment used in high-altitude operations must meet the requirements of national standards.

3. Before the construction work at height, a targeted written safety disclosure should be carried out and should be disclosed.

Construction work of meters or more is called aerial work.

5. Wear tight-fitting work clothes and non-slip shoes.

1. Personnel participating in high-altitude work must pass the physical examination before they can carry out high-altitude spring tremor operations.

2. All operations carried out at a height of more than 2 meters above the ground that may fall shall be regarded as high-altitude operations, and the relevant provisions of high-altitude operations shall be observed.

3. Before using the seat belt, it should be carefully inspected, and the load test should be carried out regularly, and it can only be used after it is qualified.

4. Soft-soled shoes must be worn for climbing operations, and it is strictly forbidden to wear slippers, hard-soled shoes and plastic shoes.

5. Before carrying out high-altitude operations, scaffolding should be erected in advance, railings should be tied as required, or isolation measures should be taken to prevent falling, and it can be used only after passing the acceptance.

6. Set up a springboard on the scaffold at a high place, and be sure to tie it firmly at both ends to prevent warping.

7. When working on the top of the container, high-altitude single-root steel beam, roof and other dangerous edges, railings and safety nets should be installed on the empty side.

8. The tools and materials brought by the high-altitude operation should be placed in the tool bag, and the safety rope should be tied to the larger tools, and the safety rope should be tied to the firm component, and should not be placed randomly to prevent falling.

9. Personnel working at height are not allowed to throw tools and objects up and down at will.

10. When carrying out high-altitude operations, except for the relevant personnel, other personnel are not allowed to stay and pass below the work place, and a warning rope should be set up below the work place to prevent laughter and defeat from falling objects and injuries.

11. It is forbidden to carry out high-altitude work on unstable structures, and in order to prevent false boarding, warning signs should be hung at the necessary places of such structures.

12. In winter, the snow must be cleared to prevent slipping and falling.

1. Employees should hold a work permit, and those who are unwell are forbidden to dig and stop hail and talk about climbing operations.

2. Reliable anti-fall measures must be taken before the slag core high-altitude operation can be carried out.

3. If potential safety hazards are found, the safety facilities must be inspected, corrected, repaired and improved.