How do I transfer data from one computer to another?

To put it simply, it is the 8 wires of the network cable, the order of the two ends is exactly the same, and the online cable is arranged on the basis of the network cable, the first and the third are exchanged, the second and the sixth are exchanged for the network cable, about 1 yuan meter, and the two joints are 1 yuan each, which is very cheap.

Connect the two machines with an online cable and set them as follows.

Double-click the network connection, click Properties in the pop-up dialog box, and then double-click the Internet protocol and select Use the IP address below

The reference settings for both machines can be as follows.

ip: subnet mask:

Default gateway: The other one is as follows.

The rest do not need to be filled.

Or you can use a portable hard drive to transfer data.

The current motherboard of the network card has been integrated, and you can use a network cable to make a crossover cable and plug it into the network card slot of the two computers, and you don't need to take the hard disk.

If you have other options, you can remove the hard drive. The data is saved on the hard disk.!!

The fifth floor is good, I don't know if he will... I don't need to add some other protocols, I remember what protocols should be added.

Remove the hard drive and install it on another computer.

Or use a portable hard drive to load the data and copy it to another computer, in short, it is very simple.

Take the hard drive and copy it back again. Quick and dirty!

You can share the disk you want to test through the network cable.

It's easy and convenient to copy it with a portable hard drive and stick it to another one

There are many ways to move files from one computer to another, but the three most common and easiest are the following:

1. U disk, mobile hard disk and other removable media for copying, such as U disk and mobile hard disk, are copied from one computer and pasted to another computer.

2. Communication software transfers: Chat software, e-mail and other software are used to transfer files from one computer to another.

3. LAN sharing. That is, all the files in the LAN can be shared and transferred to each other. And the transfer speed is more than 1MB s.

The operating system is a computer program that manages and controls the hardware and software resources of a computer, and is the most basic system software that runs directly on the "bare metal", and any other software must be supported by the operating system to run.

The operating system is the interface between the user and the computer, as well as the interface between the computer hardware and other software.

1. In the first computer, put all the materials into a folder, and then compress the folder.

2. After compressing the folder, open QQ.

<>4. After receiving the compressed package on another computer, save it to the local computer, and then decompress it.

Transferring a computer system from one computer to another usually requires some special steps and tools. This process is often referred to as operating system migration or system cloning. Here are the general steps:

1.*Determine the requirements for the target PC**:

Make sure that the hardware and OS version of the target PC can support the operating system you want to migrate.

2.*Prepare the Migration Tool**:

You can use some of the tools provided by the operating system, such as Windows Backup and Restore, or use third-party migration tools such as Acronis True Image, Easeus Todo Backup, etc.

3.Create a system image or backup

Use the migration tool of your choice to create a system image or backup of the source-state modular computer. This will include the operating system, applications, and settings.

4.Transfer Image or Backup:

Transfer the system image or backup to the target computer. You can use an external hard drive, network share, or other transfer methods.

5.*Restore System**:

Use the migration tool to restore the system image or backup to the target computer. This will overwrite the operating system and data on the target computer.

6.*Drivers & Activation**:

Once the restore is complete, you may need to install the hardware drivers for the target computer and ensure that the operating system is activated. This is because a system image or backup may not include all hardware drivers on the target computer.

7.*Test & Adjust**:

Test the new system to make sure everything is working properly. You may need to adjust some settings to accommodate the new hardware and environment.

Please note that while a system migration is possible, not all hardware and software can be seamlessly migrated to a different computer. Sometimes, specific drivers may need to be installed manually, while some applications may need to be reactivated or reinstalled. The license of the operating system may also be restricted, requiring special authorization to use it on different computers.

It's a best practice to learn more about the hardware and operating system requirements of the target computer in the code booth, back up your data, and then use the right tools to complete the migration before proceeding with the system migration. If you're not sure how to do this, it's advisable to seek professional support or consult a computer expert.

There are several ways to transfer Windows 11 system from one computer to another, and here are two of them:

Method 1: Use the system backup and restore function.

On your PC with Windows 11 installed, open the Settings app and select Update & Security> Backup> Add Drive.

Connect an external hard disk or USB flash drive that can be used for backup and designate it as the backup drive.

In the backup options, select "Back up my files now" and wait for the backup to complete.

Connect your backup drive to your new computer and open the Settings app on your new computer.

Select Update & Security> Restore Filial Piety, > Restore from Backup.

Select the backup you created earlier and follow the on-screen instructions to complete the recovery process.

Method 2: Use the system image feature.

On a PC with Windows 11 installed, open the Settings app and select Update & Security> Restore > Create a Recovery Drive.

Connect a USB flash drive with a capacity of at least 8 GB and designate it as the recovery drive.

In the restore options, select Restore PC from a system image.

Select a location to save the Windows 11 system image and follow the on-screen instructions to complete the creation of the system image.

Plug the USB flash drive into the new computer, boot the computer, go to the BIOS settings, and set the USB flash drive as the preferred boot device.

Follow the on-screen instructions to complete the installation of Windows 11.

It should be noted that the above methods may require certain computer technical knowledge, and improper operation may lead to data loss or system crash. If you are not sure how to proceed, it is advisable to seek the help of a professional.