Can I find out the specific date of production of automotive glass? 5

Generally, it is not possible to find out a specific day.

Some glasses can be read on a specific day, but most glasses cannot.

Generally, automobile supporting manufacturers are not far from automobile factories. This situation is possible for you to happen, most of them are original glass, you can rest assured... If the glass has been replaced, you can check whether the passenger door trim panel has been removed.

If the glass is replaced, the interior panels will definitely move.

I don't know how to ask, hope!

It is normal for the front and rear windshields of cars to be marked differently because they belong to different types of glass and the part numbers of the manufacturers are also different. Generally, glass labels are a combination of graphics, numbers and English letters, and are printed in the lower left corner of the glass. It contains information such as the car brand, glass brand, certification mark, glass type, production date, etc.

Whether the glass of the vehicle is original or not, whether it has been replaced, you can check the production date of the glass!

In the corners of the glass there should be.

How do you see the production date of car glass?

Take a look at the label attached to the part.

If you are looking at the production date of the car, you need to find the vehicle nameplate. This nameplate is usually attached to the B-pillar of the co-pilot. If you want to see the date of manufacture of a part on a car, you can look at the labels attached to the part, which usually have the date of manufacture.

There is a code on the lower left or right of the window glass, and there is a number and a few small black dots in the penultimate or second row, which is the date the glass was manufactured. Here's how to look at the date of manufacture, first of all, the number is the year the glass was produced, which represents the last single digit of the year of production. There is no 10-year difference between the production date of the glass and the vehicle.

A few small black dots are the month in which the glass was produced, and if you look closely at the glass of other vehicles, you will find that the small black dots of some glass are in front of the number, and the small black dots of some glass are behind the number. If the black dot is in front of the number, then subtract the number of black dots from 7, and if the dot is after the number, then add 13 to the number of dots. The end result is the month in which the glass was produced.

Answer: There is a VIN code under the front windshield of the car, and the tenth digit of the VIN code is the production date of the car, and the VIN code of each vehicle is different, but the production date can be found. The tenth digit is 5, which means that it was produced in 05, if it is A, it means that it is produced in 10 years, B is 11 years of production, and so on.

2. Nameplate of the engine compartment: In the engine compartment, there is generally an aluminum car nameplate, which indicates the number of the car, engine displacement, model, brand and other information, as well as the important specific production date. 3. The way to see the factory date of the car glass:

Year: The date code is only one digit, and this number represents the last digit of the year. Month:

There are small dots in front of or behind the number, and the effect of this little dot is originally used to determine the month of production of the glass. The dot in front of the number indicates the first half of the year, the dot after the number indicates the second half, and then the number of dots is subtracted by the number.

Next to the black dot is the production year of automotive glass, for example, this number is 7, then it will be produced in 2017, because the production time of the car and the production time of glass are generally not more than 10 years, so we can know the production time of glass according to the release time of the model.

The small black dot is the month of production, and if the small black dot is before the number, then the number of black dots is subtracted from 7, which is the month of glass production.

If the small black dot is after the number, then subtract the number of black dots from 13, which is the month in which the glass was produced.

Hello and happy to answer your question, the year number is represented by the last digit of the year; There will be no ten years between the glass and the vehicle's date of manufacture; The small dots before and after the numbers indicate the months. The dot before the number indicates the first half of the year, and the number of dots before 7 minus the number is equal to the month; The dot after the number indicates the second half of the year, and the number of dots before 13 minus the number is equal to the month. The little black star reads the week of a month, five for the 1st to 7th, four for the 8th to 14th, three for the 15th to 21st, two for the 22nd to 28th, and one for the 29th to 31st.

Hope it helps.

The most commonly used one: the form of number + dot, the dot can be in front of the number, or behind the number, as shown in the figure, the dot is in front of the number. The way to read this expression is simple: the number is the year, and the dot is the month.

This is the case for 80% of all vehicles on the market.

The trademark of automobile glass is composed of several points and a number, in which the number represents the year, such as 0 represents 2010, the dot on the left of the number represents the first half of the year, the right side represents the second half of the year, and the left has a few dots on 7 minus a few, if a point is 7-1 = June, the right is 13 minus a few points, if there are 6 points is 13-6 = July.

The specific way to look at the production date of automotive glass:

The first way: in the form of number + dot, the dot can be in front of the number or behind the number; The number in front of the first half of the year can be subtracted from the number of dots by 7; The number is followed by the second half of the year, and the number of dots can be subtracted from 13.

The second way: number + small dot + big dot; The number represents the year, the small dots represent the quarters, there are 4 quarters in a year, the maximum number of small dots is 4, the large dots represent the month corresponding to the quarter, a quarter is 3 months, and the maximum number of large dots is 3.

The third way: the first row of numbers + small dots, the second row of large dots + small dots; The number represents the year of glass production, and the small dots in the first row represent the month of the year, with a minimum of 1 point and a maximum of 12 points in the month; The second row represents the number of days in the month, with the big dot representing 10 days and the small dot representing 1 day.

By the year of production on the windshield, we can roughly determine when the car was produced, and the production date of the car is generally later than the production of the glass (in fact, there is more detailed date information on the car nameplate, which is just below the gap in the passenger door). Secondly, we can clearly know whether the windshield has been replaced by comparing the production date of the glass. This has a big impact on the valuation of used cars.

Answer Hello, I am very happy to answer for you, the way to view the production date of this car glass glass is, the first black dot plus number or room number plus black dot marking, if the front is a small black dot, the back is a number, that is, the number is produced in the first half of the year, the month is 7 minus the number of small black dots. If the number is preceded and the number is followed by a small black dot, it means that the number was produced in the second half of the year, and the month is 13 minus the number of small black dots. The second kind of number plus a small black dot and an asterisk black dot is usually a number in front, after adding a few small black dots, followed by a black dot of an asterisk, the identification method is that the number represents the last digit of the year, and the small black dot in the middle is the quarter, for example, two dots are the second quarter, and the asterisk represents the month of the quarter, such as four is the fourth month.

Day 345 365.

Every piece of car glass has its production date, generally in the lower right corner of the glass, the production date of the new car glass is earlier than the production date of the car, if it is reversed, it is not normal.

Extension: How to check the production date of a car.

Also, the glass on a car is not the same shape and is not produced in the same batch, so the production date of each piece of glass is not necessarily the same.

At present, the production date of automotive glass can be displayed in the following three ways:

Numbers, dots (one line).

Numbers, small dots, large dots (displayed in one line).

Numbers, two lines of dots (large and small).

1. Numbers and dots (displayed in one line).

The numbers represent the year, and the dots represent the month.

There are two cases, the dot is to the left of the number and the dot is to the right of the number.

a) The dot is to the left of the number.

The number represents the year and the number of points to the left of the number minus 7 indicates the month.

For example:

This means that this glass was produced in May 2018.

b) The dot is to the right of the number.

The number indicates the year, and 13 minus the dot to the right of the number indicates the month.

For example, it means that the glass was produced in October 2017.

2. Numbers, small dots, and large dots (displayed in one line).

The numbers represent the year, the small dots indicate the quarter, and the large dots indicate the month of the quarter.

For example, in 2015, the second month of the third quarter.

There are four quarters in a year, the third quarter, which includes three months of 7, 8, and 9, and the second month in the third quarter is August.

So ...15Indicates August 2015 production.

3. Numbers, two lines of dots(Some are big and some are small).

This is the most complex, but it can accurately represent the day it was produced, that is, the year, month and day.

The number is the year.

The dots in the first row indicate the month, with a minimum of 1 and a maximum of 12.

The number in the second row indicates the day of the month in which the first burn was burned, the big dotRepresents 10, a small dotRepresents 1.

Here's an example. May 23, 2016.

How, have you learned?

The production date of car glass is generally divided into two kinds of car glass production date, which are generally printed in the lower right corner or lower left corner of the glass, which is composed of small black dots and finch branches and numbers. However, there are two types of black dots and numbers. The first type of number is added with a small black dot, and the year-old number represents the last digit of the year of production.

If the small black dot is in front of the number, subtract the number of small black dots from 7 to be the month of production. If the small black dot is after the number, subtract the number of small black dots from 13 to be the month of production.

There are no black spots for special models, you need to go to the official website to check the second type, and the number is increased and the number is black spots. The number at the beginning represents the year of production, the small black dot represents the quarter, and the large black dot represents the month of the quarter.

However, some cars are more special, and there are no black spots on the BMW glass. If you want to know the production date, you have to enter the serial code on the glass, and go to the special ** to check, which is relatively troublesome.

There are several ways to check the date of manufacture of automotive glass. The first way is to look at some of the codes underneath the window panes of the sail changer, which are a series of numbers. If there are only small black dots without a code, these small black dots can also be scanned and viewed.

The second method is to use these black dots and numbers to perform a decomposition, and the final result is the month in which the glass was produced. The logo can also be seen during the scanning process, and an accurate number can be obtained at this time. <>

To check the production date of automotive glass, you want to have a certain witness to this glass. If the quality of the glass cannot be guaranteed, it may bring risk factors to itself in the subsequent use process. Glass is very important to the car itself, especially the windshield at the front.

If the shelf life has exceeded 10 years, it is best to return the glass to the car factory for replacement, because in some places the bad weather is more severe. For example, if it rains hail, the glass of the car will be smashed open. When buying a car, most people will identify the date of the car glass to protect themselves.

If the glass of the car is different from the production date, it basically has no effect. Although some vehicles are not assembled in a factory during the installation process, they will be prepared and destroyed in advance. They can't guarantee that the car's barcode will be done in every production process, and it's normal if there is no way to synchronize the time.

As long as it is glass that has not expired, it can be used during labor. Don't think you're going to suffer, it's also because they don't check it well. <>

In general, buying a car will make daily life travel more convenient and especially convenient. When buying a car, you must ensure the quality, so that you can protect yourself. When buying a car, you must bring experienced people who also know how to identify the date of car glass.

Generally, there will be a code at the bottom left or right of the car glass, which not only identifies the car manufacturer, glass brand, national certification, etc., but also the production date of the glass.

The penultimate row or the second row has a number and a few small black dots, which are the production date of the glass, and the number is the year of production of the glass, representing the last single digit of the year. A few small black dots are the month in which the glass was produced, and if you look closely at the glass of other vehicles, you will find that the small black dots of some glass are in front of the number, and the small black dots of some glass are after the number. If the small black dot is in front of the number, then subtract the number of black dots from 7; If the small black dot is after the number, then use 13 to count the black dots.

The end result is the month in which the glass was produced.