How to get on the new Jetta Jose bad?

Installation method: special clamps should be used during installation, properly open the piston ring port, the remaining four fingers protect the ring around, carefully put the ring into the piston ring groove, and the openings of each ring should be staggered with each other during assembly. Each opening should be separated by 120°, and the opening of each ring should be separated by 45° from the center line of the piston pin.

Lubricating oil should be applied after loading.

How to disassemble the FAW-Volkswagen Jetta flywheel?

The latest 3 articles.

vitaminヾ

The gearbox needs to be removed, then the clutch plate and pressure plate are removed, and then the flywheel can be removed.

Let's see what others have to say.

Care should be taken when installing piston rings.

1) The piston ring is flat-loaded into the cylinder liner, and there should be a certain opening clearance at the interface.

2) The piston ring should be installed on the piston, and there should be a certain side clearance along the height direction in the ring groove.

3) The chrome ring should be installed in the first section, and the opening should not be in the direction of the vortex pit at the top of the piston.

4) The openings of each piston ring are staggered with each other 120, and they are not allowed to face the piston pin hole.

5) The piston ring with tapered section should be upwards when installed.

6) When the torsion ring is installed, the chamfering or grooving should be upward.

7) When installing the combination ring, the axial lining ring should be installed first, and then the flat ring and the corrugated ring should be installed. Two flat rings are installed on the top of the corrugated ring and one flat ring on the bottom, and the openings should be staggered from each other.

It's good to find a professional repair shop.

Intersection of Zhongshan Road and Guangfu Road.

Hello, I'm in Jiangjin service area. There are no repair shops near this.

The closest car repair shop to my Bin Tsu Yangju.

Wuling van. The tires are flat.

How much is the front and rear bumpers of the Citroen Elysee.

Hello, do you have a liberation jh6 oil pump there.

I'm at the back gate of Zhongshan Sunwen Park.

Fuzhou Minfa West Lake Square maintenance and rescue ** number to tell this.

The nearest car repair shop to the entrance of Fushan Expressway**, I want to change tires.

Is there a repair shop here, or a repair shop**.

Your repair shop is in **.

The steering wheel of the car is locked and the car cannot be started.

Gong Mountain down 35 kilometers! There's a drawbridge here.

Is there a garage in the neighborhood that is open at night?

Simple: go to the official *** online to buy a barrel of engine oil, and then bring the engine oil for maintenance. But you need to talk to the owner of the repair shop beforehand.

It is recommended to go to a 4S shop or a professional auto repair shop for maintenance.

If you are afraid that the oil in the outside auto repair shop is fake, you can buy the oil yourself and change it, and the labor fee will not be very expensive. Last time, I bought five liters of imported GT engine oil, and it cost forty yuan to take it to the auto repair shop to change hours, and then I still had half a bottle left, so I put it directly in the trunk, in case I burned the engine oil, I could add a little more. And the GT oil I bought myself is much stronger, and now it is smoother to drive.

Automobile repair shops are mainly divided into: Class I automobile repair shops, Class II automobile repair shops, minor repairs and special repair shops. A class of car repair shops can undertake all maintenance items of a certain type of model.

It is divided into one category, two classes and three categories, which are mainly based on 4S shops and some large repair shops, with complete equipment and large investment; The second category is mainly based on some social repair shops, with ten to twenty general employees, with various maintenance services for repairing general vehicles, and the third category is mainly based on some fast repair shops and specialized repair shops, such as oil change centers, tire shops, etc.

It is very practical to divide according to the brand of the car being repaired.

Divided into a level and two levels of the secondary repair shop can carry out ordinary repair and maintenance, large-scale maintenance is not possible, the equipment is not as complete as the equipment of the primary maintenance plant, the primary maintenance plant is fully equipped, can carry out various repairs, maintenance, maintenance of large accident vehicles.

Car repair is a general term for maintenance and repair. There are five types of maintenance: daily, first, secondary, closing period, and seasonal. Repair is divided into four categories: automobile overhaul, assembly repair, automobile minor repair, and parts repair.

There are four main types of automobile maintenance workers: maintenance mechanics, maintenance electricians, maintenance sheet metal workers, and maintenance painters.

It is mainly divided into the following major items.

1. Mechanic, repair all kinds of mechanical faults of automobiles, including engine, gearbox, chassis suspension system, and oil circuit.

2. Four-wheel alignment, dynamic balance.

3. Sheet metal painting.

4. Automobile electrician.

5. Car beauty and maintenance.

6. Oil change center.

First of all, we have to clarify several major problems, the car has a steering system, a power system, a chassis system, a braking system, a suspension system, etc.

1. If we talk about general repair, it is the repair of appearance such as body repair and paint repair.

2. If it is a machine repair, it is the repair of the engine, chassis, brakes and the like, but the current car is generally replaced by this kind of large parts, and the car is not repaired.

3. There is also automotive electrical and electronic control, which requires very professional knowledge and can be achieved with the help of professional equipment.

Hope it helps, thank you!

Car repair encompasses many aspects. It probably covers the categories of automobile mechanic, automobile circuit, automobile paint repair, etc., automobile mechanic can be simply understood as the repair of hardware facilities of automobile body, such as the hardware maintenance of braking system, transmission system and steering system.

Automobile maintenance majors include: automobile inspection and maintenance technician, automobile fast repair entrepreneurship class, automobile beauty and decoration entrepreneurship class, automobile sheet metal spraying specialization, automobile electrical modification major, automobile beauty maintenance major, automobile inspection and operation engineer, automobile maintenance and operation engineer, etc.

Auto repair is mainly divided into several major sectors:1Mechanical repair is mainly powertrain repair, chassis repair, including:

Fault diagnosis and confirmation, replacement of parts, mechanical assembly and debugging and disassembly assembly process. 2.The main fault diagnosis and elimination of the circuit of the automotive electronic control system is the analysis of the vehicle circuit, the fault diagnosis and confirmation of the circuit of each system, the troubleshooting of the circuit of each system, the circuit detection and repair process, 3

Automobile sheet metal painting is mainly body repair, sheet metal painting, 4Car beauty mainly: car washing, waxing, mud grinding, polishing, etc.

Automobiles have steering systems, power systems, chassis systems, braking systems, suspension systems, etc.

There are many majors, depending on which one you are interested in.

Vehicle Engineering, Automobile Service Engineering, Automobile Maintenance Engineering, Automobile Manufacturing and Assembly Technology, Automobile Inspection and Maintenance Technology, Automotive Electronic Technology, Automobile Modification Technology, Automobile Technical Service and Marketing, Automobile Shaping Technology, New Energy Vehicle Technology, Automobile Insurance, Automobile Marketing and Service Major, Automobile Application Technology, etc.

There are a lot of related majors, generally divided into long-term and short-term majors, new energy, car beauty, second-hand car evaluation, etc., which are currently very popular and promising.

The auto repair industry is very extensive, and there are many projects. For example, there are projects such as engine maintenance, chassis maintenance, circuit maintenance, sheet metal repair, etc. At present, some new projects have been added, such as new energy vehicle maintenance, battery replacement and other projects.

Circuits, machine repair, maintenance, beauty, equipment, new energy, car sales, used car appraisal and so on.

It depends on what major you study, each major involves different content, and generally there are the following directions for learning auto repair: 1. The engine part of the gasoline engine and diesel engine.

Second, the chassis part mainly learns the chassis characteristics of Toyota, Mitsubishi, Nissan, General Motors, Ford, Hyundai, Citroen, Peugeot and other car series and major domestic models.

3. Vehicle paint maintenance: body cleaning: asphalt removal, viscose removal, whole car mud grinding, sticker removal, etc.

Fourth, exterior decoration, vehicle film, etc.;

5. Tire maintenance: four-wheel rotation, four-wheel alignment, tire dynamic balance, mechanical tire scraping; Tire repair: tire inner repair, tire side repair;

6. Electrical modification.

7. Upgrading and modification of the whole car.

Abnormal noise, breakage, collision, failure, detection, etc.

There are many of them, which are basically related to repair, and they can be called car repair.

Or learning auto repair is more promising than car beauty, because generally only new cars are to be beautiful, and car repair is different, a car light maintenance at least once a year, the business volume is relatively much larger than car beauty, so learning to repair cars is more promising than car beauty. Northern vocational education, professional car doctor.

Sub-machine repair and circuitry, sheet metal, painting.

Auto circuits, machine repair, sheet metal, and beauty have all of them.

Organic electrical repair, sheet metal, painting, beauty. Electronically controlled electronic maintenance.

Sheet metal painting, car beauty.

There are too many subdivisions of auto repair, including welding, sheet metal spraying, machine repair, new energy, fast repair and quick maintenance, etc.

When you open your own auto repair shop, some bosses can make a lot of money, and some bosses lose money, the main reason is that the bosses have different business capabilities.

First, depending on the investment, the location, and the local model, the choice of service items for the auto repair shop is very important. Because, there are so many models of cars that there are so many aspects that need to be repaired that it is impossible for any car repair shop to cover all the repairs.

Second, auto repair shops should compete with auto 4S shops, other auto repair shops, auto repair shops, auto tuning shops, and even auto beauty shops, and the boss should have a full competitive strategy.

Third, the boss should be able to sell sales skills and sales skills, which is the key to success.

Fourth, the stocking of parts, the selection of first-class merchants, the management of employees, the technical level of masters, and the addition of car beauty decoration and modification projects will affect the profitability of auto repair shops.

In short, if the boss wants to open an auto repair shop, he should learn more from the experience and lessons of other bosses, and he can also read more books in this area, such as: automobile aftermarket management, automobile aftermarket.

There are many things to pay attention to, but the premise is to have a very thorough understanding of the industry, and it is best to understand some auto repair techniques. To do this, you can go to an auto repair shop as an apprentice in two or three years and start slowly; Or it is more cost-effective, go to a professional auto repair school for half a year and a few months, not only can you master everything, but you can also get entrepreneurial support from all aspects of the school, and you can solve many questions.

If you want to open a simple car repair and maintenance shop, you can follow these steps:

First, there are many car models, and there are many places that need to be repaired on the car. Since it is a simple repair, it should be a quick repair, not a major repair. The boss should determine the project of quick repair according to the technical level of himself and his master.

2. Positioning. It can be positioned as a mid-to-high-end model or a low-end model.

3. Funding. It takes about 200,000-400,000.

Fourth, choose the right store, decoration.

5. Recruit employees and be good at mobilizing the enthusiasm of employees.

Sixth, choose the best equipment and product suppliers.

Seventh, the most important thing is to be able to sell and solicit customers. You must know how to sell and sell your skills.

First of all, go to the special industry management department of the local public security bureau to handle the operation of special industries.

After obtaining the license, take the housing lease contract of the business location to the industrial and commercial bureau to apply for the business license of the nature of self-employed, and after obtaining the business license, go to the tax bureau to apply for the tax registration certificate. The repair shop will generally set up an office area (you can agree with an insurance company with better service to come in for the on-site office), a repair area (a lift is a must, if you have enough funds, you can consider building a paint room), a parking area (divided into a repair area, a customer pick-up area), a spare parts warehouse, a rest area and a display area for accessories and supplies.

The above are the conditions, the following is the necessary software to open a factory, first of all, there must be a source of customers, secondly, there must be technicians, and finally, there is money to do publicity. The rest needs to be practiced by yourself, and it is still very troublesome to start your own business.