Why is my Wi Fi speed changing so fast? 10

The wireless connection is the operator's broadband, and as long as the broadband speed is fast enough, the wireless network speed will be fast.

2.Next, let's enter the connected wifi details, my phone is MIUI8 (the pride of rice fans), and the entry details will vary depending on different operating systems, but basically they will be in WLAN, and they should be able to find it as long as you are careful

3.Once we've found the wifi details, we're going to start doing great things - make your network sizzle We find "IP Settings", change "DHCP" to "Static", and then this wifi details will probably look like this.

4.Then we find "dns1" and "dns2" in the extra stuff (whatever the hell), and then change "dns1" to ", change "dns2" to ", and click save.

5.Doesn't it feel like the wifi is much faster now?

Workaround:

1.Enable the traffic monitoring feature to see which software is taking up your internet speed.

2.Go to the traffic management page of the router gateway to check which device occupies the highest network speed and record it.

3.Go to the DHCP page of the router gateway and check whether there are any unknown devices connected to the network. Record the MAC address of the device and disable its network access through MAC filtering in advanced settings.

4.Turn off the router for 5 minutes and check whether the line connection is normal.

5.Keep your wireless router away from electromagnetic devices. Shorten the distance between network equipment and wireless routers, reduce the possibility of signal attenuation and interference, and increase wireless relay amplification to expand WiFi signal coverage.

1. Hardware problems with the router itself.

If the signal of the router is unstable, first confirm whether it is a problem with the router itself, such as poor heat dissipation of the router in summer. The body is very hot or there is a problem with the router hardware.

If it is very hot, it is recommended to put it in a well-ventilated place to confirm whether the signal is stable.

2. Update the router firmware.

If it's not a heating problem, you can update the router firmware and try to set the router again.

3. The signal of the wireless router is interfered with.

If there are some interfering devices near the router, it is easy to cause the signal to be unstable. For example, multiple routers are together, and the frequency bands and channels between multiple routers are the same or adjacent to each other, which may also cause this problem.

4. The router works for a long time and the status drops. You can turn off the power, reconnect the broadband cable, and re-energize it.

In 2 cases, 1 is because of the weather, 2 is rubbed on the net, you can find antivirus software to check.

Of course, this is only a theoretical value.

You can refer to the following points to do the test.

First, first of all, check and kill the Trojan horse and clean up the garbage on the computer.

Second, the bandwidth may be limited by the superior or rules may be set.

Third, it may be caused by everyone sharing bandwidth during the peak period of Internet access.

Fourth, if their servers are unstable, it will also cause you to be unable to open.

Fifth, if there is a DNS problem, replace the spare DNS.

Sixth, it may be that there is a problem between your network and the node that you are accessing, resulting in inaccessibility. Complete.

There are several possible scenarios for slow internet speeds:

1. Problems with MTU settings.

Our router (PPPoE mode MTU value is 1492) (static IP and DHCP tacit mode MTU is 1500) can try to change small points, such as etc., which can generally solve such problems.

Setup method: Log in to the router management interface, advanced settings - WAN port setting - MTU value, after the change is completed, "System Tools" - "Restart the router".

2. The rate of the WAN port.

Log in to the router management interface, advanced settings - WAN port rate control, select 10M full-duplex mode, after the change is completed, click "System Tools" - "Restart Router".

3. It may be a problem with the proportion of network speed of several computers.

You can divide the bandwidth by leveling the scum, log in to the router interface, and click "Advanced Settings" - "Bandwidth Control" to set the following settings:

Enable Add to List.

Enable Add to List.