Fitter? Turner? Which one is better to learn! Is it good to learn fitter?

I suggest that you in the current situation, it is better to learn to be a turner

Because the development of China's machinery manufacturing is a CNC lathe, it needs to have a high level of operators, a comprehensive theoretical and practical operation level, and a professional foundation for automation

At present, China's large-scale heavy industry enterprises, with the continuous improvement of equipment imports and technical requirements, there is a shortage of high-level talents, so the employment prospects can also be

Now China's heavy industry has, Shenyang Heavy Machinery, Taiyuan Heavy Machinery, Luoyang Heavy Industry, etc

I suggest that you decide on your own situation, and you need to decide from several aspects:

1.Be mindful of your hobbies;

2.How much time is the training, the time is short (less than 20 weeks) and you will learn to be a lathe; Fitter is a type of work that is operated by hand, and the basic skills need to be long;

3.After this school training, are there any other learning opportunities? If you have, or you want to learn to operate a CNC lathe, you can consider learning lathes;

4.It is also necessary to analyze the difficulty of employment according to the situation of your region and machinery manufacturing industry;

5.If you choose to learn fitters, then you must be prepared to endure hardships, the practice of basic skills is relatively boring, and you can't see the results in a short time;

6.If you want to develop in the direction of molds, you can also choose to learn fitters.

Good choice.

The fitter work is very simple, the turner is doing fine work, I don't know if you are learning a semi-automatic car or a counting carI think you have to learn according to your hobbies, if you work as a fitter in the future, the work is light and the treatment is also very average! The lathe worker is different, and after mastering a certain technology, he will definitely not starve to death!

I think it's good to learn lathe, because lathe is the mother of the entire machinery industry, you really learn lathe, and then you do other things should be very simple.

Fitters are studious. However, it is recommended to learn to be a lathe, and now the lathe is very popular.

The lathe and lathe workers I learned are more tired and the wages are relatively high, and the milling workers are more relaxed, and the wages are okay.

These two types of work are good, it depends on whether the technology is refined or not.

Slow fitters fast turners, turners are dangerous, learn fitters, relatively safe.

It's the same with everything.

It's all the same.

The fitter is good, because this type of work is more practical, and it does not necessarily need equipment to work, and the other two types of work need to rely on equipment, so personal flexibility is poor.

1. Fitter is a technical job, which is very good (the job is easy to find) 2.

File drill reamer.

Vices and vices.

Lathes and milling machines. Grinder-based tools for assembly and maintenance of skilled workers.

Fitter (ordinary fitter): a person who assembles, trims, and processes parts.

Mechanic fitter: mainly engaged in the maintenance and repair of various mechanical equipment.

Tool fitter: Mainly engaged in the manufacture and repair of tools, molds, knives.

There are two categories of general fitters: 1Mechanical maintenance fitters.

2.Assemble fitters.

The name is a lot like yours (senior fitter.

Mold fitters. Tool fitters.

Maintenance fitters. Mechanic fitter.

Scribe fitter. Electrical fitters.

Scribe fitter. Sheet metal fitters.

installation fitters and so on) but fitters are mainly to.

File drill reamer.

Vices and vices.

Lathes and milling machines. Grinder-based tools for assembly and maintenance of skilled workers.

3. I am mainly engaged in the manufacture and repair of tools, molds and knives, and I am very popular if I learn well.

Learn to be able, you have to be good,! Difficult to learn.

Hello. Student number fitters can focus on the following three aspects.

First, the basic knowledge is the key to learning fitters. Fitter is a wide range of technical work in the technical work, and it is also divided; Profiles, marking, installation, repair. If you want to learn fitters well, in addition to concentration, you must also carefully master the knowledge related to fitters, such as; Riveting, electrical, welding.

Beginning; Fitter basics, mechanical drawing and fitter-related books.

2. The "metal cutting manual" should not be left in hand. In actual production, the fitter has the reputation of "universal fitter". In addition to proving the role of fitters, this also shows that fitters have a wide range of knowledge and complex content from another perspective.

So, with the information by your side, you can read it at any time.

3. In addition, we should accumulate experience and learn from our peers with an open mind.

First, the choice of materials:

Intercept a section of 45 steel with a length of 125 mm of blank material.

2. Sawing: Installation of saw blade: When installing the saw blade, the tension should be appropriate, and it is easy to break the saw blade when sawing if it is too loose or too tight. Because the hand saw cuts when it pushes forward, and does not cut when it returns backwards, it is important to ensure that the direction of the tooth tip is facing forward when installing the saw blade.

3. Filing: 1. Filing tools: Filing is the main tool for filing, which is commonly made of carbon tool steel T12 and T13, and hardened to HRC62 67 after heat treatment. It is composed of the file surface, file edge, file tongue, file tail, wooden handle and other parts.

2. Types of files: According to the use, files can be divided into three categories: ordinary files, special files and plastic files. According to its cross-sectional shape, ordinary files can be divided into five types: flat files, square files, round files, semi-circular files and triangular files.

4. Drilling: The tool for fitter drilling is usually carried out by a drilling machine, as shown in the figure below is a small bench drill.

Fifth, tapping:

1. Taps are forming tools specially used to process small diameter internal threads.

2. The die is a tool for processing external threads, which is made of alloy tool steel 9sicr and hardened by heat treatment. It is shaped like a nut, except that several chip holes are drilled into it and form a cutting edge.

3. Tapping the internal thread: first chamfer the hole of the end face of the thread drilling hole to facilitate the tap. Screw in one or two turns to check whether the taps are perpendicular to the end face of the hole (you can use visual inspection or a rectangular ruler to check in both directions), and then continue to screw the dumpling bar lightly.

When the cutting part of the tap has been cut into the workpiece, it can only rotate without pressurization, and each revolution should be reversed 1 4 times so that the chips can be broken.

4. Tapping the external thread: the method is the same as tapping the internal thread.

6. Assembly: <>

Lathe, fitter welder which major to learn.

Automobile workers, fitter welders are automobile maintenance technology majors, mainly learning automobile maintenance technology, mastering the basic knowledge and skills of automobile maintenance technology, mastering the basic principles and technologies of automobile maintenance technology, mastering the basic operation methods and technologies of automobile maintenance technology, mastering the basic testing methods and technologies of automobile maintenance technology, mastering the basic maintenance methods and technologies of automobile maintenance technology, mastering the basic maintenance tools and equipment of automobile maintenance technology, and mastering the basic safety operation procedures of automobile maintenance technology. Steps to solve the problem of car maintenance: 1. Determine the problem:

First of all, it is necessary to determine the problems of the car, and the problems of the car can be determined by checking the appearance, internal structure and operation status of the car. 2. Analyze the problem: According to the problem of the car, analyze what the problem of the car may be caused by, so as to determine the cause of the problem of the car.

3. Solve the problem: According to the cause of the problem of the car, Zhitong takes corresponding measures to solve the problem of the car, such as replacing parts, replacing lubricating oil, replacing the car battery, etc. 4. Inspection results:

The basic principles of automobile maintenance technology refer to the basic principles of automobile maintenance technology, including the principle of automobile structure, automobile electrical, automobile lubrication, automobile exhaust principle, etc. 2. The basic operation method of automobile maintenance technology: The basic operation method of automobile maintenance technology refers to the basic operation method of automobile maintenance technology, including the basic tools of automobile maintenance, the basic technology of automobile maintenance, and the basic operation steps of automobile maintenance.

3. Basic testing methods for automobile maintenance technology: The basic testing methods of automobile maintenance technology refer to the basic testing methods of automobile maintenance technology, including the basic testing tools of automobile maintenance, the basic testing technology of automobile maintenance, and the basic testing steps of automobile maintenance.

Fitter is a general term, fitter includes mold fitter. Every type of fitter operates differently.

Classification of fitters]:

Fitters are divided into ordinary fitters (assembly fitters), repair fitters, mold fitters (tool manufacturing fitters) and so on.

1) Ordinary fitters (assembly fitters) are mainly engaged in the assembly and adjustment of machines or components, as well as the clamping processing of some parts.

2) Repair fitters are mainly engaged in the maintenance of various machinery and equipment.

3) Mold fitters (tool manufacturing fitters) are mainly engaged in the production of molds, tools, measuring tools and models.

The details are as follows:

Fitter]: Manual work in cutting, mechanical assembly and repair operations, named because it is often operated by clamping the workpiece with a vise on the fitter table.

Clamping work mainly includes chiseling, filing, sawing, scribing, drilling, reaming, tapping and threading (see threading), scraping, grinding, straightening, bending and riveting. Fitter is the oldest metalworking technique in machine building.

Mold fitters.

Mold fitters belong to the type of skilled work, which requires relatively less theoretical knowledge. Having a high school foundation in mathematics, physics and chemistry has the basic requirements, and does not require a deep theoretical foundation. In addition to the basic knowledge of high school, it is also required to have knowledge of mechanical drawing and mechanical drawing.

Mold fitters have high skill requirements and emphasize hands-on ability.

The main work of a mold fitter is building die, repairing die, maintaining die and rebuilding die. In addition to molds, the scope of work of mold fitters also includes the design, manufacture and maintenance of various fixtures, drilling tools and measuring tools. In addition, some industries also require mold fitters to have the ability to design, process, assemble, test, calibrate, etc. for some tooling equipment with special requirements.