Distress! WHAT SHOULD I DO IF THE D VERSION OF WINDOWS IS LOCKED FOR PATCHING? 30

Restart the computer, before the WinXP splash screen appears, press the F8 key, select the security system, you should be able to log in, and back up your important data to other disks in it.

I've been in a similar situation, so I'll just use this method, and then replace your file with someone else's key file, and it should be fine.

Citation: Boot the computer with the Shanghai ** version of the xpsp2 disc, and then overwrite or fix it.

31kingson".

His opinion is good, but it should only be installed with an upgrade, not a fresh one.

A company like Microsoft, which does not put Chinese in its eyes, does not steal him? Who to steal?

In fact, Microsoft is not the only operating system. Why hang yourself from a tree?

You deserve it, who told you to use piracy, a company still uses piracy, I really can't think of it! It is recommended to buy the genuine version, but now Microsoft has a pirated version for genuine version, you can search for it on the Internet!

You can buy a Shanghai** version of XPSP2 and use it to boot up the computer, and then overwrite or fix it.

Redo it once, select the unqualified hard disk, the software needs to be reinstalled.

Use the 4-in-1 number counter to calculate a serial number!

Try System Restore, I've tried it before.

Microsoft's software is too expensive.

1.When you boot up to the welcome screen, press Ctrl+Alt+Delete, pop up the account window, enter the username: administrator, press enter, if this account also has a password, then this is the case:

2.Press F8 when starting

3.Select Safe Mode with Command Line

4.Select "Administrator" to pop up the "Command Prompt" window.

5.Add users: net user asd add6liter administrators: net localgroup administrators asd add

7.Reboot and select ASD to enter.

8.The control panel --- user account --- the user who forgot the password - delete the password.

Are you talking about system administration passwords? If so, you can find a CD-ROM cracker, and it's easy to get it.

The easiest, but not so convenient, way to reinstall your computer is to install it using a disc.

The Lenovo motherboard BIOS is locked and cannot change the settings, which is caused by the wrong settings.

Take Lenovo motherboard BIOS locked as an example, the specific solution is as follows:

1. First of all, during the computer startup process, when you are in the self-test or startup of the Lenovo interface, you can quickly press the F2 button, as shown in the figure below.

2. Next, when Lenovo enters the BIOS, press the F2 key, which can be seen in the Lenovo boot interface, and press the F12 key at the same time to select the startup item, as shown in the figure below.

3. Then, after pressing the version F2, you can directly enter the BIOS, and at the same time, you can perform basic settings on the computer. Mainly hardware information, the configuration is to set the interface, network, etc., as shown in the figure below.

4. Then, in the pop-up window, find the date time column, as shown in the figure below.

5. Finally, move the keyboard cursor to time, and then press the enter key to confirm the modification, at this time, remember to save and exit (f10), as shown in the figure below.

The first floor says that it works, but at the same time it raises a big question: do you adjust the CMOS menu??? Unplug the battery,,CMOS, the most fundamental computer program, there is nothing in it, you need to write the settings one by one** Just ask how many people will

I think no one is going to your BIOS, you should be operating wrong, read more BIOS menu instructions, which key to press

Join your BIOS is really locked, then there is no way to start everything from scratch

The easiest and fastest way to do this: unplug the electronics from the motherboard for a few seconds and put them back in, all the passwords are gone, but your Bois settings become the default.

If you don't want to discharge.

You can remove any hard drive from the optical drive.

Boot will automatically enter the BIOS.

There's a round battery on the motherboard to remove it and put it back on later, and all passwords are canceled.

Because you have two users set up, one has no permissions.

Discharge that battery on the motherboard.

Removing passwords with software is simple.

If you do not have a password for the administrator account, you do not need to enter the administrator password in the user name. Enter to try.

I've forgotten my password! If you fail to enter the password multiple times, the computer will be stuck for a while, and the more you make mistakes, the longer the card will be!

Make a USB flash drive into a boot USB flash drive.

Enter the PE system.

Clear the login password.

Reboot to enter, then reset your password.

That is, in the future, you can't check call records and handle some simple business by yourself. Take your ID card to the business hall to reset your password.

Hello, the pro-phone is locked, and if you want to unlock it, you can unlock it by restoring the factory settings, and the operation steps are as follows: 1. Turn off the hand, press and hold the power button, and you can force it to shut down. Some mobile phones need a password to turn off the phone, so you can only turn it off when the phone runs out of power.

2. Then press and hold the volume up button and the power button, note that they are pressed at the same time. 3. Use the volume up and down keys to adjust the options in the screen that appears, select Restore factory settings, I hope my answer can help you.

Manual service, or go to the business hall to get your ID card.

Lost phone bills in the mobile phone business hall, and the result shows that the account is locked? How to solve it.

You can use third-party tool software, take PE Toolbox as an example, and the operation steps are as follows:

2. After restarting, you will enter the selection interface of the general PE toolbox, and select the eighth "Run Windows login password cracking menu";

3. Then select "01 Clear Windows Login Password (Change Password)";

4. Enter "1" and press Enter;

5. Enter "0" and press enter (usually the first one is the C disk, and the following ones are arranged in turn);

7. Enter the numerical serial number of the password account to be modified, for example, 0 is administrator;

8. After entering y to save, press esc to exit and pull out the USB flash drive and restart it.

in ideal:

Just take a brick and smash the computer.

in fact:

It is possible to enter the LC4 crack in PE, Dospass crack, crack with CD, and so on.

Let your dad turn on the computer first [for whatever reason, check the information, etc.。。。

Then you can use this software to find out the computer password, I have used it, and it works.

When you boot up to the welcome screen, a prompt box will appear to enter your username and password, press Ctrl+Alt+Delete

Jump out of the bill. window, enter the username:

administrator

Just press Enter. If this.

administrator

The account also has a password, so it can be like this:

Press F8 to select when the win7 system starts.

Safe Mode with Command Line" selected.

administrator”

Jump out of "command prompt".

Window to add users:

net user asd/add

liter administrators: net localgroup administrators asd add

Restart and select. ASD enters. Control panel.

User accounts. Users who have forgotten their password.

Remove the password.

What kind of lock is it??

What is the game?

What kind of dialog box pops up?

Is it all the game or is it all??

Can you explain?

I've played this game, and it's not really the same thing as Contra, it's just borrowing chickens to lay eggs.

w, s, control the character forward and backward.

a, d, control the character to pan left or right (note, the direction of the character's shot does not move) mouse pointing to aim, in other words, mouse control shooting direction, left click**.

Next NIC Mac software.

The address of your computer's network card.

Swap it out. You can get online.