Five strokes can not type, you need to switch and open the input method again to type

Your so-called "five-stroke system" may refer to Microsoft's king code five-stroke input method, which can be found in the CD-ROM of office2000 or on the Internet**. The following is the Chinese army**.

Of course, if you want, it is recommended to install Pole Wubi, the current version is. It supports very large character sets, such as "枟, 馼", and is much more powerful than Microsoft.

I suggest that you have the next Wubi 86 version, is this what you have installed on your system? First, right-click the input method icon at the bottom right of your desktop,Then click on the property,Select the five strokes on the computer,Delete it,And then go to the Dotsoftware station**Wubi 86 version,This is not solved,Don't waste your brain to think about what to do,Hehe,

Uninstall the software and reinstall it!

It is strongly recommended that you pretend to be a Sogou narration method, Wubi Pinyin can also be changed from simple to complex, and the current popular terms are not afraid of not being able to type.

Are you using version 86?

Just type "OK" and just type tf.

Set your Wubi input method as the default input method!

Sogou Wubi Pinyin mixing effect is not done.

Switch to the Wubi input method on your computer.

When the English letters are typed, it is caused by the wrong setting, and the solution is as follows:

1. First of all, find the Chinese Pinyin input method on the computer, and then you can put the mouse on the input method.

2. Then use the right-click on the input method above, pop up the tab, and then use the left mouse button to click on the restore language bar, and pop up the settings window to operate.

3. After that, you can click on the Add option.

4. Then enter the operation of adding input method, as shown in the figure below.

5. Finally, you can pull down the bottom, and then check the Chinese Simplified at the top.

The five-stroke input method option inside,Then OK,Then press the shift+ctrl option to switch to the five-stroke input method。

The Wubi input method cannot be used because of the wrong setting, the solution is as follows:

1. Click the start menu icon on the win10 operating system, and in the pop-up menu, click Settings.

2. The settings window pops up, drag the scroll bar down, find the time and language, and click the time and language. The input method can be set in the time and language.

3. After entering the time and language options, click Region and Language in the left area.

4. In the right page of Region and Language, drag the scroll bar down, click the found Chinese, and then click the option button that appears below.

5. Under the keyboard configuration in the Chinese window, click the plus icon to add keyboard, and select Microsoft Wubi Input Method in the pop-up menu.

6. After the addition is completed, click on the input method position in the lower right corner of the desktop, select Microsoft Wubi, and you can use the Wubi input method.

Summary. You need to set the search range of Wubi input method to GBK.

1. Click the Enter Settings button.

2. Click [Attribute Settings] in the menu that appears.

3. You can see that the search range of Chinese characters is [commonly used Chinese characters].

4. Set the search range of Chinese characters to [GBK Chinese characters].

5. Finally, click [OK], and then enter the word to type.

What should I do if I can't type a five-stroke input method on the computer.

You need to set the search range of Wubi input method to GBK. 1. Click the Enter Settings button. 2. Click [Attribute Settings] in the menu that appears.

3. You can see that the search range of Chinese characters is [commonly used Chinese characters]. 4. Set the search range of Chinese characters to [GBK Chinese characters]. 5. Finally, click [OK], and then enter the word to type.

Can you be remote.

This one can't be remote.

Help operate remotely.

I can't operate remotely.

Magnum Pena is now such an icon.

Tap ** to go to Settings.

Hello, I am happy to serve you, and give you the following answers: The words typed out of the computer Sogou Wubi input method are incorrect, which may be caused by the improper setting of the Sogou Wubi input method or the improper setting of the Pinyin input method. Workaround:

1.Open Sogou Input Method, click "Settings", in "Input Method Settings", set "Input Method Switch" to "Sogou Wubi", set "Input Method Mode" to "Smart Mode", click "OK" to complete the setting. 2.

If there is no problem with the settings of the Sogou Wubi input method, you can try to change the settings of the Pinyin input method to "Zhikuan Command Mode", so that the Sogou Wubi input method can work normally. Personal Tips:1

Try to use the Sogou Wubi Banquet Qiao Xun method as much as possible, because it is faster and easier to input Chinese characters than the Pinyin input method. 2.Try to use the smart mode, because it can better support the correct use of the Sogou Wubi input method.

3.Try not to use a custom thesaurus in your input method, as it may cause the words entered to be incorrect.

Summary. In the Windows operating system, you can switch the Wubi input method by following the steps below:1

Open any textpad, such as Notepad, Word, etc. 2.Place the cursor in the area, press the "Shift" and "Ctrl" keys on the keyboard, and press the "Space" key at the same time to open the input method switch menu.

3.In the input method switch menu, select "Wubi Input Method" to switch to Wubi Input Method. In addition, if you have installed the Wubi input method on your computer, you can also switch it by the following operations:

1.In any of the texters, place the cursor over the area. 2.

Press the "Shift" and "Ctrl" keys on the keyboard, and press the "F" key at the same time to open the input method settings menu. 3.In the input method settings menu, select "Wubi Input Method" to switch to Wubi Input Method.

In the Windows operating system, you can switch the Wubi input method by following the steps below:1Open any textpad, such as Notepad, Word, etc.

2.Place the cursor in the area, press the "Shift" and "Ctrl" keys on the keyboard, and press the "Space" key at the same time to open the input method switch menu. 3.

In the input method switching menu, select "Wubi Input Method" to switch to Wubi Input Method. In addition, if you have installed the state hall reading five strokes input method on the computer, you can also switch by the following operations:1

In any of the texters, place the cursor over the area. 2.Press the "Shift" and "Ctrl" keys on the keyboard, and press the "F" key at the same time to open the input method settings menu.

3.In the input method settings menu, select "Wubi Input Method" to switch to Wubi Input Method. It should be noted that there may be some differences between different versions of the operating system or different input method software, and the specific switching method may be slightly different.

In the Windows operating system, you can switch the Wubi input method by following the steps below:1Open any textpad, such as Notepad, Word, etc.

2.Place the cursor in the area, press the "Shift" and "Ctrl" keys on the keyboard, and press the "Space" key at the same time to open the input method switch menu. 3.

In the input method switching menu, select "Wubi Input Method" to switch to Wubi Input Method. In addition, if you have installed the state hall reading five strokes input method on the computer, you can also switch by the following operations:1

In any of the texters, place the cursor over the area. 2.Press the "Shift" and "Ctrl" keys on the keyboard, and press the "F" key at the same time to open the input method settings menu.

3.In the input method settings menu, select "Wubi Input Method" to switch to Wubi Input Method. It should be noted that there may be some differences between different versions of the operating system or different input method software, and the specific switching method may be slightly different.